Question about 2000 Pontiac Montana

2 Answers

2000 montana brakes shutter and the abs light and

2000 montana brakes shutterand make crunching noise and the abs light and check traction system message comes on but seems to stop fine

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

I had the same problem on my 2000 montana, used a scanner to check for abs code and found right front sensor throwing code, checked sensor and found ok, checked harness from sensor to connection under hood and found wiring circut at the plastic clip where harness hooks to sensor was bad, replaced harness from connector to sensor and problem went away

Posted on Jun 17, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

You have worn rear brakes repair and problem will go away.Same vehicle,same problem. solved

Posted on May 02, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

ABS & Traction control light are on, what is causing this?


About 39,700,000 results (0.44 seconds) Search Results

    Traction Control Light is on Inspection - YourMechanic

    www.yourmechanic.com > Auto Repair and Maintenance Services
    As a result, sometimes an issue in the ABS can trigger the traction control light. If this is the case, then both the ABS and Traction Control lights will be on.

    My anti-lock brakes and service traction control lights came on ...

    https://answers.yahoo.com/question/index?qid...
    Oct 16, 2006 - I drive a 2000 chevy impala...i have 135,000 miles on my car. ... The problem is that starting in '92, Anti-Lock Brakes are controled electronically, so if there is a problem with the sensor, your ABS might fail when you need them the most. ...ABS (?nti-lock Brake System) is a ...

    How To Fix ABS & Traction OFF / Service Traction System ...

    ? 5:35
    https://www.youtube.com/watch?v=KFQphWamcjQ
    Feb 17, 2014 - Uploaded by Zero Gar
    How To Fix ABS & Traction OFF / Service Traction SystemLight Monte ... side connector that leads from the ABS controlmodule to the speed ...

Feb 05, 2016 | Cars & Trucks

2 Answers

Why does the "service traction system" and "service ABS" light to come on when driving?


The service ABS light on while driving means that the ABS wheel speed sensor is defective or a broken wire that goes to the sensor. You now only have regular braking. This means that you can now lock up one or more wheels with hard braking. Then the car can swerve either left or right while braking hard. The traction control must also rely on the ABS wheel speed sensor to keep both front wheels spinning at the same speed for safety reasons. This prevents loss of control of your car while getting better traction with the tires.

Jun 25, 2014 | 2000 Pontiac Montana

2 Answers

Abs light and traction control light is on


as you know there is an antilock brake electrical problem. traction control is part of the abs system and the lights will come on at the same time. Unfortunately you will need to get the trouble codes from the antilock brake controller. this can only be done with a very expensive scan tool. there are too many possible problems to be guessing. If you go to your local shop they will probably give you the trouble codes for about 75 dollars or less then I could possibly be of more help to you.

Apr 10, 2012 | 2000 Pontiac Montana

1 Answer

2000 buick regal , track light on, anti lock brake light on???


You will need to take it to the GM dealer or any well equipped brake shop and have the system ABS/Traction Control system computer scanned, a fault has occurred in the system and at this time you have no Traction control or Anti-Lock brakes. When the lights were turned on the systems control module stored a code for the fault in the system. The ABS and Traction Control are one in the same system.

May 20, 2011 | Buick Regal Cars & Trucks

2 Answers

Abs and tcs lights on what do they stand for?


ABS stands for anti lock brake system.
TCS stands for traction control system.

I recommend having your abs system diagnosed for faulty sensors, control module, etc. With the abs light on the traction control system is designed to disable because it utilizes the abs system to automatically help control your vehicle in loss of traction situations.

Dec 19, 2010 | 2000 Hyundai Sonata

1 Answer

I ve got a kalos 1.4sx 2008 and i ve got problems with the brakes. The brakes ''crunch'' when i m bringing the car to a halt,even on dry roads. The abs warning light has been on a couple of times but...


The Chevrolet/GM autos rely on a Kelsey ABS actuator system that is electronically controlled. I know its hard to describe sounds, but is it possible the crunch is a hum? If the ABS light comes on and goes off after restart it means one of two things. That the ABS controller is going bad or the speed sensors on the wheels have come loose or gone bad. Under your hood there is a fuse compartment that contains the fuse that controls the ABS system on your vehicle. Its a 60 Amp fuse and large.. Look in your owners manual for its location. . Check it with the vehicle OFF to make sure its not blown or cracked. Leave the fuse disconnected and start the car. The ABS light should STAY on as well as the parking brake light. Test your brakes by pressing down on them while the car is in park and not moving.. do you hear the sound. If you DONT hear the sound then the ABS control module is causing the brake pump to work continuously and thus your "noise". YOu can confirm by placing the fuse back in place and then listening to the car about where the drivers door is... do you hear a hum? If so you can leave the fuse disconnected to deactivate the ABS module. The brakes will still function you just WONT have ABS capability. Confirm this with a very slow roll from park or neutral and press brakes to stop. If you dont hear the noise or a hum, reconnect the fuse and take the car for a drive. Turn to the left and right while applying the brake at an intersection.. vehicle in motion slightly. Do you notice that the ABS light or noise occurs turning one way or the other or both? If it comes on during the turn then the ABS sensor in that wheel or both wheels need to be inspected and possibly replaced. Finally, you need to inspect the brake pads for wear..typically however brake pads have WEAR INDICATORS built in and will start to SQUEAL when you apply the brakes telling you time to replace pads. If its a squeal and not a crunch then have pads replaced. Finally, be sure and make sure you dont have any rocks or road debris within the brake area or between teh pads and the rotors. That would be your final area to review for a CRUNCH noise.

Jun 11, 2010 | 2008 Chevrolet Aveo5

1 Answer

Traction control and abs brakes fail light on


this means the ABS/Traction Control system has been diabled and all u have are regualr brakes without any traction control have the dealer or a brake shop test the system, there will be a system fault code that indicates where to look for the problem part or wiring.

Jan 26, 2010 | 2004 Pontiac Montana

2 Answers

ABS/traction control 1998 lincoln towncar


sounds like the brake pads may be metal to metal, that could be the noise problem, but until u have the system tested for the trouble code that is setin the ABS modules memory when the light comes on you are guessing, the Dealer is the only one in most cases that has the scan tool to check ABS trouble codes.

May 13, 2009 | 1998 Lincoln Town Car

2 Answers

ABS light is on and no traction light is on. I have a Pontiac Grand Prix 2001 gt. Light stays on always. I don't feel a problem with the brakes.


Check around all wheels to make sure the wires going to the wheel are intact and plugged in tightly. I had the same thing on my 2000 G.P. GT, in my case it was just a broken wire to one of the wheels.

May 01, 2009 | 2000 Pontiac Montana

1 Answer

2001 S Type Jaguar ABS and Traction Control fault lights on


Hi First I suggest that you get a diagonostic check on ABS system. and then a visual inspection of the brakes. Warped brake rotors do not make noice, but the steering will start to judder when brakes applied at around speeds from 40 up . Possible cause that the vehile picked up something from road such as nylon/ plastic/stone Mike

Apr 24, 2009 | Jaguar S-Type Cars & Trucks

Not finding what you are looking for?
2000 Pontiac Montana Logo

1,142 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8211 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...