Question about 2004 Toyota Camry

1 Answer

I HAVE A 2004 TOYOTA CAMRY. I HEAR A ROARING NOISE COMING FROM LEFT FRONT BY THE TIRE. I CAN HEAR IT WHILE IN THE CAR. THE FASTER I GO THE LOUDER IT GETS. IT MAKES THIS NOISE WHILE GOING STRAIGHT AND GETS LOUDER WHEN MAKING RIGHT TURNS. NO NOISE WHILE MAKING LEFT TURNS. I JUST BOUGHT NEW TIRES AND HAD FRONT END ALIGNED. COULD IT BE WORN BEARINGS OR TRANSMISSION?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 22 Answers

Sounds to me like its a cv joint. if the rubber boot gets damaged in any way, dirt gets in there and really does some damage. check the boot really good. if you dont see any holes or anything it might just be the wheel bearing. id take it to a mechanic and ask him to just look at it. usually they wont charge ya.

Posted on Apr 19, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

00Linc ls noise from front end sounds like tire road noise steering wheel shakes a little


Wheel bearing? If you turn left and it gets louder. It is the right wheel bearing. And vice versa.

Nov 07, 2015 | Cars & Trucks

1 Answer

The roaring noise in the front end with a vibration, the faster you go the louder the roaring and vibration


Did it do this before things were replaced? Did you replace the half shafts (driveshafts)?

Mar 30, 2015 | 2005 Chevrolet Equinox

1 Answer

2002 camery roaring from front seems louder when slowing down. It is not brakes


check wheel bearing...transmission output shaft bearing. noise is louder because when bearing slow down, they get louder from worn down ball bearing inside the cage, space is developing between the ball bearing..caused by lack of lubricate, or just worn out bearings

Aug 01, 2012 | 2002 Toyota Camry

1 Answer

When im driving the car moans and moans even louder when i turn the wheel, the faster i drive the louder the sound gets


You should check the power steering fluid level first. However, you said the noise gets louder if you turn the wheel. That sounds like a front hub bearing. To check the front and rear hubs, raise the tires off the ground one at a time. Try to move the tire in & out at the top, sides and bottom. spin the tire if you can. Only a tiny amount of play, if any, is acceptable. If you hear or feel rumbling or roughness when turning the tire, the hub is bad and must be replaced

Aug 03, 2011 | 2004 Chevrolet Cavalier

1 Answer

2001 toyota corolla I have a loud roaring seens like it from the right front wheel.


THIS NOISE IS CAUSED BY A POSSIBLE WHEEL BEARING
WHEN YOU DRIVE THE VEHICLE YOU SHOULD HEAR A ROARING NOISE AND AS YOU GO FASTER THE NOISE WILL GET LOUDER AND WHEN YOU TURN THE WHEEL FROM SIDE TO SIDE THE NOISE WILL FADE IN AND OUT. THIS IS AN INDICATION THAT THE WHEEL BEARING IS BAD.
ALSO ANOTHER WAY WOULD BE TO JACK UP THE FRONT OF THE VEHICLE, BLOCK OFF THE REAR WHEELS SO THE CAR DOES NOT ROLL BACK ON YOU, THEN PUT THE CAR IN NEUTRAL AND GO TO THE WHEEL PUT YOUR HAND ON THE STRUT BASE AND SPIN THE TIRE WITH YOUR OTHER HAND YOU SHOULD FEEL A GRINDING NOISE. IF SO THE WHEEL BEARING ON THAT PARTICULAR SIDE IS BAD AND IT NEEDS TO BE CHANGED

Jan 12, 2011 | 2001 Toyota Corolla

1 Answer

I have a toyota Matrix 2004 (base) and there is a noise coming from the wheel (front right) as I drive around. My suspence, is the wheel hub bearing failure. If this is true, what is the specification of...


I have a 2004 Toyota Matrix with a vibration noise coming from the front end. The noise gets louder the faster you drive and is present even when you push in on the clutch and put it in neutral. If the driver jerks the wheel to the right when driving the noise stops for a second. The noise keep up at the same pitch if you **** the wheel to Left. If you think it's a wheel bearing, which side would you guess?

Oct 13, 2010 | 2004 Toyota Matrix

3 Answers

My car makes a bad growling noise. Everyone said that it was a front wheel bearing because that tire was worn down really bad on the outside. I replaced the passenger front wheel bearing, and it is still...


WHEEL BEARING USUALLY STARTS MAKING A ROARING TYPE NOISE WHICH USUALLY GETS LOUDER THE FASTER YOU DRIVE, SOMETIMES THEY WILL BE LOOSE , TO CHECK JACK UP THAT WHEEL AND GRAB TOP AND BOTTOM OF TIRE AND SHAKE, IF THERE IS MOVEMENT, TRY TO GET SOMEONE TO ROCK TIRE FOR YPU AND WATCH WHERE AXLE GOES INTO CENTER OF BEARING AND SEE IF AXLE IS MOVING WITH TIRE MOVEMENT AND SPINDLE REMAINS STATIONARY, THEN IT IS BAD BEARING, OR SOMETIMES THERE WILL BE NO MOVEMENT, THEN BLOCK REAR WHEELS AND RUN CAR WITH THAT WHEEL IN AIR AND SEE IF YOU HEAR NOISE, GOOD LUCK.

Mar 20, 2010 | 2001 Chevrolet Cavalier

2 Answers

Wierd noise


Sounds like a wheel bearing going, or gone. Possible tire/alignment, but more than likely, wheel bearing. You going to fix, or have it fixed?

Apr 24, 2009 | 2004 Pontiac Grand Am

1 Answer

On crysler 2000 lhs i have a roaring soun coming from the right tire that sounds like its getting louder


Hi my name is Allen!

With roaring noises coming from the wheel area, we must be very careful in diagnosis because it could be the "Wheel Bearing" which is the most likely cause, but it also can be a tire itself.

Here is how to see which one it is, take the rear tire and put it on the front and put the front tire on the rear.

Next drive the vehicle, if the noise went to the rear of the vehicle and is no longer in the front, then you know its the tire. If the noise is still in the front then you know its the wheel bearing or the CV Joint, but if you do not hear a clicking noise when turning sharply both ways while moving then you most likely can rule out the CV Joints also. Then you know for sure without a doubt it is the wheel bearing.

For further assistance contact me at FixYa!

Jan 01, 2009 | Chrysler LHS Cars & Trucks

2 Answers

Front shocks


it can be many thing shock,top plate ,stabilisator link , good luck pierre

Sep 16, 2008 | 1998 Toyota Camry

Not finding what you are looking for?
2004 Toyota Camry Logo

898 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...