Question about 1997 Ford Escort

1 Answer

Input/turbine speed sensor circuit

Trying to locate where the input/turbine speed sensor circuit is on the engine.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 316 Answers

Your speed sensor, is located on top of the transaxle, near the starter. To access it, remove the battery, then remove the battery tray (4 10mm bolts). You will see wires coming from the lower oxygen sensor, and they snap into the bracket that holds the speed sensor in place. The actual speed sensor has a 2 wire clip on it, and is held in place by the bracket and a 10mm bolt.

Posted on Apr 20, 2009

  • Chris Agoniaz Mar 07, 2012

    I will now order my sensor. I've been searching for this information and people just don't know where this sensor is located or better yet mention their experience but fail to specify where the location was. its420_us knows the deal. Thank you!!!!!

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have two code error on my jeep grand Cherokee 2007 idle air-control p0507 x3 of them & p2767 input/turbine speed sensor B, could you help me get idea, of what it is?


code p 0507 refers to idle speed control (ISC) system rpm higher than expected==causes -wiring--ISC actuator/IAC valve --throttle motor -- throttle valve tight / sticking---ECM
it als o refers to idle air control(IAC) system--circuit low===causes --wiring short to ground --IAC valve ---ECM
code p 2767 refers to transmission input shaft speed sensor/turbine shaft speed (TSS) sensor B---no signal===causes --wiring---transmission input shaft speed sensor /TSS sensor

Mar 26, 2016 | Jeep Cars & Trucks

1 Answer

I am looking for a ECU pinout or a Diagram. I am throwing a "turbine overspeed" code (P0716) on a non turbo car. Also P0721 and P0705 On second ECU with the same issue.


Hello. You are confusing the turbine over speed control sensor module of the car's transmission, with a turbo charger- a forced air induction device, of a car's engine. One has nothing to do with the other.

The turbine over-speed control module is basically a sensor that reads the speed of the transmission's input shaft (torque converter) in relation to the speed of the output shaft- transmission speed ratio/gear.

Simply put- when the P0716 error code displays, it means that the ECM has detected the value(s) of the input sensor as being out of range, like being too high or too low; or that there is some bad wiring issue in the circuit.

When this happens, the subsequent P0721 output speed sensor and P0705 transmission range sensor circuit malfunction error codes appear- and does not necessarily mean that the entire transmission components (electronic modules, sensors, or mechanical parts) have malfunctioned leading to a major transmission overhaul.

It is most likely that the Input Turbine Speed sensor needs to be replaced. Take the car to a well qualified SAE certified transmission specialist who has precise diagnostic and transmission control readers and are able to reset the computerized transmission modules once the repair is made.

Feb 20, 2015 | 2006 Kia Sorento

1 Answer

Po715


I do not believe so . Code p0715 if that relates to your question refers to the turbine shaft speed(TSS) sensor-circuit malfunction===causes wiring--TSS sensor--ECM/TCM
The drive speed sensor is the sensor that works the speedo and sends impulses to the transmission control module to change gears in relation to the turbine speed sensor
This is how the TCM knows when to change ratios in the transmission because of the differences in recorded speeds of the engine torque convertor and the drive shaft

Aug 20, 2014 | 2001 Jeep Cherokee

1 Answer

Input turbine speed sensor location


Hi Mario, I may be behind times, but believe the sensors you're referring to are the turbine pressure sensors. There are usually two, mounted onto he turbo inter-cooler. Regards John.

Apr 21, 2014 | 2002 Honda Odyssey

1 Answer

Location input turbine speed sensor


it will be located on the exhaust side of the compressor (turbine wheel ) probably near the centre

Mar 28, 2014 | 2005 Toyota Camry 2.4

1 Answer

I need help asap 2003 Expedition code p0171 and code p0712 i have and idea of the 1st code but whats the secound code i really need help i dont want to take it to a shop where there going to charge me alot...


P0700 Transmission Control System

P0701 Transmission Control System Range/Performance

P0702 Transmission Control System -Electrical

P0703 Torque Converter/Brake Switch B Circuit

P0704 Clutch Pedal Position Switch -Circuit Malfunction

P0705 Transmission Range Sensor/Switch Circuit Malfunction (PRNDL Input)

P0706 Transmission Range Sensor/Switch Circuit Range/Performance

P0707 Transmission Range Sensor/Switch Circuit Low Input

P0708 Transmission Range Sensor/Switch Circuit High Input

P0709 Transmission Range Sensor/Switch Circuit intermittent

P0710 Transmission Fluid Temperature Sensor Circuit

P0711 Transmission Fluid Temperature Sensor Circuit Range/Performance

P0712 Transmission Fluid Temperature Sensor Circuit Low Input

P0713 Transmission Fluid Temperature Sensor Circuit High Input

P0714 Transmission Fluid Temperature Sensor Circuit Intermittent

P0715 Input/Turbine Speed Sensor Circuit

P0716 input/Turbine Speed Sensor Circuit Range/Performance

P0717 Input/Turbine Speed Sensor Circuit No Signal

P0718 Input/Turbine Speed Sensor Circuit Intermittent

P0719 Torque Converter/Brake Switch B Circuit Low

P0720 Output Shaft Speed Sensor Circuit

P0721 Output Shaft Speed Sensor Circuit Range/Performance

P0722 Output Shaft Speed Sensor Circuit No Signal

P0723 Output Shaft Speed Sensor Circuit Intermittent

P0724 Torque Converter/Brake Switch B Circuit High

P0725 Engine RPM Input Circuit

P0726 Engine RPM Input Circuit Range/Performance

P0727 Engine RPM Input Circuit No Signal

P0728 Engine RPM Input Circuit Intermittent

P0729 Gear 6 Incorrect Ratio

P0730 Incorrect Gear Ratio

P0731 Gear 1 Incorrect Ratio

P0732 Gear 2 Incorrect Ratio

P0733 Gear 3 Incorrect Ratio

P0734 Gear 4 Incorrect Ratio

P0735 Gear 5 Incorrect Ratio

P0736 Reverse Incorrect Ratio

P0737 TCM Engine Speed Output Circuit

P0738 TCM Engine Speed Output Circuit Low

P0739 TCM Engine Speed Output Circuit High

P0740 Torque Converter Clutch Solenoid Circuit

P0741 Torque Converter Clutch Solenoid Circuit Performance or Stuck Off

P0742 Torque Converter Clutch Solenoid Circuit Stuck On
P0743 Torque Converter Clutch Solenoid Circuit Electrical
Now i dont know a lot about automatics especially modern ones with all this fancy electronics thats used nowdays but i think its a fault with the temperature sensor for the gearbox.But where its located and what it looks like i have no idea it could even be mounted inside the gearbox .Sorry not a very good answer from a mechanic but?? very few of our europeon cars come with auto transmission .Evan when i do know whats wrong i cannot buy the parts for the gearbox as only re-con boxes supplied by the dealer so best advice is to try a specialist in auto box repairs only .PS some of my best students when i used to teach mechanics many moons ago were the girls so no excuses like iam only a girl please

Apr 22, 2013 | Cars & Trucks

1 Answer

Turbine input shaft speed sensor circuit


both input and output speed sensor are located on the left side of the transaxle case. do not interchange input and the output sensor.

Sep 21, 2012 | 1998 Dodge Intrepid

2 Answers

P0715 turbine input shaft speed sensor circuit what that mean


P0715 MAZDA - Input Turbine Speed Sensor Circuit Malfunction.


xicon.jpghttp://engine-codes.com/p0715_mazda.htmlForum CodePossible causes- Transmission speed sensor circuit is open or shorted.
- Poor transmission speed sensor circuit connection
- Faulty transmission speed sensor When is the code detected?Diagnostic Trouble Code (DTC) P0715 is detected when TCM or ECM does not receive the proper signal from the sensor.

Jul 04, 2012 | 2001 Mazda Tribute

2 Answers

Check engine code PO715


Transmission Input Speed Sensor (G182 VAG com code): Circuit Malfunction
The Input Turbin Speed Sensor is located inside the transmission, the code can be caused by a failed sensor or sensor wiring or a slipping transmission.

Jan 16, 2011 | Volkswagen Golf Cars & Trucks

1 Answer

2000 toyota echo code po1725


dak408_132.gif

See above chart
CIRCUIT DESCRIPTION
This sensor detects the rotation speed of the input turbine. By comparing the input turbine speed signal (NT) and the counter gear speed sensor signal (NC), the ECM detects the shift timing of the gears and appropriately controls the engine torque and hydraulic pressure in response to various conditions, thus performing smooth gear shifting.

Jun 19, 2010 | 2000 Toyota ECHO

Not finding what you are looking for?
1997 Ford Escort Logo

1,826 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5470 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...