Question about 2000 Pontiac Grand Am GT

1 Answer

04 grand am won't start, but tries

In the last couple months, it would start fine and then it started to seem like it was having trouble starting, like a weaker cranking when i would turn the key, but it would still start on the first try.   On friday, I go to start the car and it tries, but won't (it was cold out). I let the key sit in the "on" position for about a minute and then try again and it starts (I did have to push the gas, because it seemed to not have enough fuel or something). Tried to start it today, sunday (warm today), and it cranks about 2 times and then just stops, then I take the key out and try again and it cranks once and stops. If i let it sit for a few minutes, it will then crank 2 times again (like roo-roo, then silence), but not enough to actually start.  Also when in the "on" position, I believe it's the fuel pump that i can hear for about 2 seconds and the oil and battery light stay on, and security light isn't on so it's not that. Any help would be appreciated

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Pontiac Master
  • 443 Answers

Your battery is getting weak from age sounds like to me ..take it and have someone pull a load test on it and see.. but this sounds like an older battery not holding a charge anymore. Jerry and holler if you need more.

Posted on Apr 30, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

96 GMC Yukon won't turn over


Thats what i would try and if that dont help, maybe check the connections at the starter.

Feb 18, 2013 | 1996 GMC Yukon

1 Answer

04 jeep grand cherokee won't start just drags,


Could be a failing starter or problems with the cables.
A dead cell in the battery will do it too.

Jul 03, 2012 | Cars & Trucks

1 Answer

My 2006 gmc Sierra won't start sometimes. I have to recode the key and it starts right up and is fine for a couple of months and then it won't start again and I have to recode again. What could...


Since a recode will fix the problem for a couple of months, I would guess it is how you are carrying or storing your key instead of something in the vehicle. Are you putting them close to your cell phone or other electronic device? If so try to change your habit and store them away from anything electronic (including your alarm clock).

Sep 19, 2011 | 2006 GMC Sierra

1 Answer

Slow Start/Engine Light


My advice is that you get the trouble codes read[or buy you own obd2 reader at wallmart because around here they charge $60 for a scan and you can buy the scaner from them for less than $100 and you can check it yourself if the light comes back on].A scan tool is the only way to know for sure where you should be looking.

Dec 15, 2009 | 2004 Jeep Grand Cherokee

1 Answer

Car starts fine then immediately cuts out


it could be the iac valve or the conector at the pcm. I would try replaced the iac valve first before you try the other. we have seen the wires at the pcm conector break.

Aug 10, 2009 | 1995 Mazda 626

1 Answer

2004 Jeep Grand Cherokee Trouble Starting


if the battery is weak,it does not have the rpm needed for the computer to start the vehicle.
if your immobilizer is kicking in,it will not start.
get the electrical checked out.

Apr 20, 2009 | 2004 Jeep Grand Cherokee

1 Answer

2004 grand am won't start, but tries...


Sounds like your battery is on the way out. Have a load test done on battery & voltage check on alternator. If all works well once it starts, I'd bet on the battery, but load test will confirm, which they will do for free usually if your buying the battery from them.

Apr 19, 2009 | 2004 Pontiac Grand Am

1 Answer

98 Ford Explorer wont move in reverse or overdrive


Probably low oil pressure in the transmission or worn clutches.

Mar 09, 2017 | 1998 Ford Explorer

Not finding what you are looking for?
2000 Pontiac Grand Am GT Logo

365 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...