Question about 2002 GMC Sierra 1500

1 Answer

Getting the rotors off the back of a 2002 gmc sierra pickup

Do you to remove the spring or relieve the pressure from th emergency brake to get the rotor off

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,055 Answers

Are you talking rotors or drums?

Posted on Apr 19, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

1989 GMC SIERRA BRAKE LIGHT IN DASH STAYS ON [CHECKED FOR AIR IN BRAKE LINES-NO AIR] [BRAKE FLUID LEVEL GOOD] [BRAKE PEDAL PULLED UP] IN DASH BRAKE LIGHT STAYS ON


Check your emergency brake. Make sure it isn't partially pressed in. Try unplugging the switch to the emergency brake and see if the light goes out; if it does the switch is bad.

Jun 24, 2011 | 1989 GMC Sierra

1 Answer

2000 GMC Sierra 3500 4x4 standard cab 5.7 litre single rear wheels,Please tell me How do get the front rotors off? Any help would be much appreciated.


The brake calipers will need to come off which is the hardest part for most. Have a " C" Clamp with an 8 inch throat is needed so you can press the brake pads inward to release pressure from the rotor. Upon removing the caliper the saddle if so equipt has to be unbolted from the steering knuckle. Two bolts hold this saddle on. You may not have one depending on the design caliper this truck has. Once these parts are off the rotor will come off

Apr 08, 2010 | 1998 GMC Sierra

1 Answer

How do i replace the front rotors of a 1993 Sonoma?


You have to remove the wheels and the brake calipers and then the rotors.You will need and 3/8 allen socket to remove the bolts that hold the caliper to the spindle.You also need to pry the brake pads back slightly to relieve the pressure from the pad to the rotor.This will make it easier to remove the caliper over the rust ridge of the rotor. Get a book to show you how.You can find them at the library or there are some good how to videos on line.Just google how to replace rotors.Afer you have replaced the rotors and reinstalled the calipers make sure and pump the brake pedal before driving the vehicle.Because the pedal will go to the floor the first few pumps.Pump it up til it feels hard before driving it.Hope this helps.Good luck.

Mar 22, 2010 | 1993 GMC Sonoma Club

1 Answer

How to install brake rotors on a 02 gmc sierra ?


Remove the tires. Then the calipers.Two bolts from the back side.They are allen I think.Well the used to be anyway.Once you have them off rotor should just fall off.

Nov 08, 2009 | 2002 GMC Sierra 1500

2 Answers

How to remove the rear rotors on a gmc 2002 2500 hd extra cab 4x4


The rotors are one with the hub.s, So, you need to pull the axles , hub bearings. Good Luck

Sep 18, 2009 | 2002 GMC Sierra 2500HD

2 Answers

Remove front Brake Rotor


Try opening up the caliper with a flat screwdriver thru the opening in the middle of the housing.pry on the rotor and pull towards you to push the rotor back.That should loosen it up enough for you to get it of the rotor.If that dont work you probably got a stuck caliper and have to release the brake line and do the procedure again. GOOD LUCK

May 09, 2009 | 2000 GMC Sierra 3500

3 Answers

Hot front wheels


Replace brake hoses,they have an inner core that has ruptured and the outside rubber core is keeping pressure on the caliper with you foot off the brake. This will fix it! A common problem for this vehicle.

Apr 15, 2009 | 1991 GMC C1500

1 Answer

Emergency Brake Adjustment


Ahh they are a real pain in the **** you need to remove the rear wheels calipers caliper anchors then the rotors and then you can adujust the park brake shoes up just untill you feel a bit of drag on the rotor then back them off a bit. Other wise you need to buy the tools to check the adjustment bottom line they are a pain

Jan 18, 2009 | 2002 GMC Sierra 2500HD

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

107 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...