Question about 1994 Ford Ranger Supercab

1 Answer

Need clutch replacement directions for Ford Ranger

Need clutch replacement directions for 97 Ford Ranger XLT
Manual 2.3 trans

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Remove drive shaft,remove crossmember under transmission.Remove transmission and diconnect linkage.Remove bell housing,and clutch berring assembely.Remove bolts on pressure plate.Once this is done.Remove fly wheel for machineing.you will need a pilot shaft to alighn clutch assemblely.Possible one will come with new clutch and pressure plate.Reverse assemblely in same order remember to torque all your bolts with torque wrench.Take your time.

Posted on Apr 19, 2009

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
michigan man
  • 3533 Answers

SOURCE: clutch replacement directions

check out www.autozone.com they may have the step by step instructions plus diagrams on how to do this job

Posted on Apr 19, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

97 Ford f150 xlt rear wheel drive. transmission not shifting into 3 shifts from 1 to 2 fine when in overdrive shifts in to 3 feels like neutral. Trans need rebuilt or replaced?


Are there any lights lit on the dash ? check engine , overdrive etc..
could be just a shift solenoid ... Try draining trans fluid an replacing filter. Have to drop transmission pan .. what's the fluid look like ? a nice pink color ? does it smell burnt ? Is it full ?

Feb 25, 2015 | Ford Cars & Trucks

1 Answer

2005 Ford Ranger A/c Clutch relay fuse diagram


Usually located under the hood in a black box that contains several relays. The owners manual will tell which relay does what.

Jul 24, 2014 | 2005 Ford Ranger XLT

1 Answer

Can clutch pedal be adjusted?


The first thing I would do is to replace the master cylinder as the compensating port may be blocked causing this problem. It is an indication of a worn clutch but having this problem at my expense I learnt to do the cheap fix first as clutch kits are worth about 5 times the price of a m/cyl.. Normally hydraulic clutches are not adjustable

Jul 18, 2014 | 1992 Ford Ranger

1 Answer

I have 97 for ranger with tape deck with cd player


This should help you wire up your new stereo. 97 Ranger stereo wiring diagram. They do make a plug in harness for your truck. Metra part number 70-5600.

May 10, 2010 | 1997 Ford Ranger SuperCab

1 Answer

2000 Ford Ranger XLT Automatic trans. 4X4 3.0L


Check your operator's manual. Make sure any and all fuses that have anything to do with the affected items are not blown and are working properly. If you can; check for loose fuse connections or wires. Hope this helps. God bless!

Nov 04, 2009 | 2000 Ford Ranger SuperCab

1 Answer

Clutch replacement directions


check out www.autozone.com they may have the step by step instructions plus diagrams on how to do this job

Apr 19, 2009 | Ford Ranger Cars & Trucks

1 Answer

1992 Ranger xlt 3.0 Manual 5-speed (Any clutch adjustments?)


FORDS ARE OK if the noise u are hearing is going away when u press the clutch it sounds like it is comming from the gearbox. the gearbox stops turning wheh u hold the clutch in is the gearbox noisey when u dive it 1-2-3-4 this will let u know if the gearbox is worn
is oil level ok ? check it and transfere case

hope it helps let me know if u need more help

Dec 19, 2008 | 1992 Ford Ranger

1 Answer

Clutch fluid


I would first check for leaks, and if no leaks i would check your master and slave cylinders if they are working properly

Dec 17, 2008 | 1993 Ford Ranger SuperCab

1 Answer

Ford Ranger XLT reverse lights on when motor off


replace the park\neutral safety switch it controlles the reverse lights auto trans ---manual trans replace the rev erse light switch
rank my solution

Dec 11, 2008 | 1999 Nissan Frontier

Not finding what you are looking for?
1994 Ford Ranger Supercab Logo

493 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

80339 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

fordexpert

Level 3 Expert

5687 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...