Question about 1993 Saturn SL2

3 Answers

Keys will not come out of ignition switch most of the time on a 1997 Saturn SL2

Posted by on

  • edballah Apr 25, 2009

    Thanks for tour help

  • kellykaylaju Apr 29, 2009

    same thing happened to me..fix right away..my key would not come out of the ignition at all one day..left us stranded and had to be towed..had to replace whole cylinder!

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

Your tumbles are going bad so you are going to have to change the ignition switch
Thank you

Posted on Apr 23, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Spray brake fluid in the ignition. That's what the car repair shop did to mine and I haven't had any problems since.

Posted on Jun 23, 2009

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

As well as make sure the keys grooves is not complelty wore off or down hope it helps. good luck

Posted on Jun 12, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

The security system on 2000 Saturn SL2 will not let me start my car how do i fix it


TURN IGNITION KEY TO ON POSITION FOR TEN MINUTES UNTIL SECURITY LIGHT DISAPPEAR,THEN TURN OFF IGNITION SWITCH FOR 5 SECONDS THEN START THE ENGINE.

Mar 26, 2011 | Saturn SL2 Cars & Trucks

1 Answer

Should my 1998 Saturn sl2 cooling fan come on when the car ignition is turned to acc


no it should not run in accessory position and the reason i suspect is a contact breakage inside the ignition switch which is on the end of then steering lock .so long as it stops when you take the key out leave well alone to the switch packs up completely as it could last for years and you might have bought a newer car before it goes completely

Feb 25, 2011 | 1993 Saturn SL2

1 Answer

I need details on how to change a 1997 Saturn SL2 wiper switch,th


you must remove the steering wheel,air bag and the clock spring and the the whole switch,no easy,way DO NOT DO if you do not know how,you could set the air bag off or mess up the clock spring position and wreck it,,,take it to a shop,if you are not familiar with this kinda repair

Feb 18, 2010 | 1997 Saturn SL

1 Answer

Car doesnt always start, does not turn over, does not click, and jump starting does nothing. Can it be bad battery terminals? Wouldnt think its the starter or alternator, no noise when key is turned. Could...


the ignition maybe bad are the car is not all the way in park also check the battery to make sure it has a good charge and it does not have a bad cell in it and the terminals are clean.

Dec 17, 2009 | 1997 Saturn SL

1 Answer

I have to replace an ignition switch for a 2000 saturn sl2 not sure of laction of switch


You put the key into the lock cylinder, the lock cylinder is directly attached to the ignition switch. Both are inside the plastic boot around steering column.

Oct 24, 2009 | 2000 Saturn SL

1 Answer

Saturn sl2 problems my car won't start after I got a new ignition and steering coloum. What could the Tech done wrong cause it work and started perfect before he fixed it.


he didnt relearn the ignition switch to the bcm for the security to work thats why it dont start,he gotta learn the passlock

Sep 30, 2009 | 1997 Saturn SL

1 Answer

2001 Saturn 4 dr. ignition switch sometimes will not turn.


i would try calling an auto parts store a lots times they will sale ignition switch ,,,good luck ,,,joe

Aug 29, 2009 | 1991 Saturn SL2

1 Answer

Hi, I have a 1993 Saturn SL2. When the key is


hmm..you could try the remote to disactivate the alarm..thats wat i did to my jeep and its never happends since :)..hope i solved oyur problem

Jul 30, 2009 | 1993 Saturn SL2

3 Answers

1997 saturn sl2 dohc is there a timing belt or chain on it


These engines have a timing chain, not a belt. They also have nylon coated guides under the cover that wear. If you change the chain yourself, or have it done, check the guides as well.

Mar 15, 2009 | 1997 Saturn SL

2 Answers

1997 saturn sl2 key is in start position, no ignition, lights are fine


I had this problem with my 99 SL2, it was the starter. I checked for codes and there weren't any. Take your starter to a place like Auto Zone where they can test it. Most likely they will find that it is bad.

Sep 23, 2008 | 1997 Saturn SL

Not finding what you are looking for?
1993 Saturn SL2 Logo

Related Topics:

224 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saturn Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...