Question about 2003 Mitsubishi Montero Sport

1 Answer

Changing Front Rotors

How do I remove the front rotors on my 2003 Montero Sport??? I have the brakes off, the 6 rotors bolts and nuts removed, but the cap (or plate) in front of the rotors won;t come loose. I exposed the bearings which revealed two brass screws. When I attempt to remove those, they both began to strip with little effort. What am I missing???

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I'm at the exact same spot.... if anyone can throw us a bone on this I would greatly appreciate it!

Posted on Oct 23, 2010

  • chigarm0 Nov 19, 2010

    I found out what we need... it's called a gear puller. 3 arms preferably. I was told that it takes an hour just to get this thing off even with a good one, but if you take it to a shop they're gonna charge an extra $120 - $150 on top of the regular charges because of the amount of time it takes.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Vibration of steering wheel while bracking in Mistzubishi montero sports 2012


if you have a vibration only while braking and only in the steering wheel then you have warped front rotors causing the problem. there was a time when you could have the rotors turned and reused. but the way they make rotors now(too thin to start with) you will have to replace them, make sure the wheel nuts are torque to spec.

May 21, 2014 | 2000 Mitsubishi Montero Sport

2 Answers

I need help changing the rotors on my 2003 jeep liberty sport


You go to You Tube Video & watch that

You Tube Video & Google- are all you need
for any vehicle question

Apr 02, 2013 | Cars & Trucks

1 Answer

How do I get the front end rotors off a 2001 Mitsibishi Montero Sport?


take tire off, remove the two bolts on the back side of the brake caliper, remove brake caliper(with a coat hanger/stiff wire suspend caliper for it does not strain the brake line, remove rotor. Hope this helps Tim

Oct 15, 2010 | Mitsubishi Montero Sport Cars & Trucks

1 Answer

How do I eplace the front rotors on a 1997 Mitsubishi Montero Sport 4wd? Is there a special tool required to remove and replace the rotor and is there an adjustment needed inside the hub?


jack up the car, first break lugs, and remove tire. There are two bolts on the front back side, if it like are endeavor then I compressed the caliper piston and then I had to take apart the caliper as the old pads did not come out, those are the two bolts on each end. then put back on. Once the caliper is off the rotor will come off as it is held on by the caliper. Just be careful with the caliper once it is removed as it is a brake line, you can use a hanger for it does not pull on the line when it is off the rotor. Good Luck Tim

Oct 03, 2010 | 1997 Mitsubishi Montero Sport

2 Answers

How to remove brake rotors on a 1996 ford explorer


How to replace the rear brake pads on a 1995 through 2001 Ford Explorer The system utilizes a drum-in-hat type rear brake rotor. The integral drum allows the use of a drum-and-shoe type parking brake system. All other components are similar to their front disc brake components Remove the two bolts on either side of the brake hose with the rubber boots. Do not remove the four bolts where the axle ties in. The two bolts to be removed require a 10mm socket/wrench. Loosen the pads from the caliper Rotor Removal In order to take the rotors off (replace with new or have them machined), it is best to loosen the emergency brake shoes. To do this, behind the rotors, in the back there is a rubber plug, remove that and you can use a screw driver to engage the teeth of the adjusting screw, turn it clockwise to loosen, usually 10-20 teeth. Usually this means turn it downward. After this, it may still be difficult to get the rotors off without tapping them. Use a rubber mallet and hit them from behind. Before really whacking the rotor, make sure you have loosened the adjusting screw enough. It may take heavy swings of the rubber hammer to do this. It will eventually break loose. Parking Brake You might want to check the parking brake while you are here. To remove:
  • Remove the rear disc brake rotor.
  • Remove the outboard return spring.
  • Remove the adjusting screw spring.
  • Remove the rear brake shoe hold-down spring and pin.
  • Remove the brake shoe adjusting screw and nut.
  • Remove the front brake shoe hold-down spring and pin.
  • Remove both parking brake shoes and the inboard return spring.
  • Check the parking brake lever for excessive wear and replace as necessary.
To install:
  • Position the front parking brake shoe to the backing plate and install the hold-down pin and spring.
  • Install the rear parking brake shoe with the inboard return spring.
  • Position the brake shoe adjuster screw and nut on the shoes and install the rear shoe hold-down pin and spring.
  • Install the brake shoe adjuster spring.
  • Install the outboard return spring.
  • Adjust the parking brake shoes and install the rotor, caliper and wheel.
  • Lower the vehicle and tighten the wheel lug nuts to 100 ft. lbs. (135 Nm).
ADJUSTMENT
  • Measure the inside of the drum portion of the rear brake rotor
  • Remove the rear disc brake rotor.
  • Using Brake Adjustment Gauge D81L-1103-A or equivalent, measure the inside diameter of the drum portion of the rear disc brake rotor.
  • Subtract 0.020 in. (0.508mm) from the first measurement, adjust the brake shoes to that size
  • Adjust the parking brake adjuster screw until the outside diameter of the parking brake shoes measures 0.020 in. (0.508mm) less than the drum measurement.
  • Install the rear disc brake rotor.
Reassembly Reassembly is easy. Put new or machined rotors back on by sliding them over the lugs (they should slide on easily.) Loosen bleeder valve (having a catch bottle handy is good). Push calipers in slowly (using a c-clamp or large channel lock pliers), close bleeder valve. Put on pads. Lubricate metal clips with small amount of anti-seize. Re-adjust the emergency brake by turning the opposite direction from loosening. Refill the brake master cylinder

Aug 09, 2010 | 1996 Ford Explorer

2 Answers

How to remove front brake rotor on 1999 mitsubishi montero sport?


6290230.gif Here's an exploded view, you'll need to pop off the grease cap #6 then remove the snap ring #8 to get the hub off to get the rotor off. Hope it is of some help...pictures always are.

Dec 16, 2009 | 1999 Mitsubishi Montero Sport

1 Answer

Front brake rotor removal


Your rotors have an integrated hub with serviceable bearing.

Remove the six bolts around the center of the hub and pry off the grease cover.

behind it you will find a locking wheel with two philips screws holding it in position. Remove the screws and unscrew the locking wheel.

Behind is a large axle locknut that requires a special tool to remove. It has two small holes to grip with. Unscrew it and you will be able to remove the outer bearing, then slide the rotor off the spindle/axle.

From there you can unbolt the rotor disc from the hub backside, or replace the whole unit. Replacing the whole unit will require installing new bearings/races, however.

Either method will require repacking the bearings and loading the bearings with the special locknut tool.

May 11, 2009 | 2000 Mitsubishi Montero Sport

1 Answer

Changing brakes mits. monero spt. 4wd 2000


it is easy to change even you can change it your just going to take off the front wheel then you will see the break panel there's a bolt holding the break pad loose it so can pull the break pad out... or more or less even a driveway mechanic can do this for less cost...

Apr 30, 2009 | 2000 Mitsubishi Montero Sport

1 Answer

2002 Ford Escort front brake rotors - removal


the first thing i will recomend you, is ti buy the new rotors first,
sisnce you did not mention if you allready have the new ones
and see if they are slide out type rotorss or one piece rotor assy
with the lugn nuts, sometimes they just slide out but sometimes you need to remove the center big nut in order to remove them.

Jun 22, 2008 | 2002 Ford Escort

Not finding what you are looking for?
Cars & Trucks Logo

779 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

77202 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8743 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...