Question about 1997 Chevrolet Blazer

1 Answer

Need to replace rear brakes on 1997 chevy blazer

How to replace rear brakes on 1997 chevy blazer

Posted by on

  • Anonymous Mar 14, 2014

    i have a 1997 chevy blazer it has a load tapping coming from motor what can i do my self to find and fix the problem

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 47 Answers

Disk or drum?

Posted on Jun 23, 2009

  • dan perkerewicz Nov 02, 2011

    drum

  • dan perkerewicz Nov 02, 2011

    have it put together but not sure if its rite drum wont go on

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Are the brakes on an '03, Chevy Blazer disc our


the front have disc, brakes. as well as the rear. 2 and 4 wheel drive have disc, brakes front and rear. good-day !

Aug 11, 2011 | 2003 Chevrolet Blazer

1 Answer

How do you replace a blower motor resistor on


It is located on the right rear of the engine compartment. held in by two screws.

Jun 29, 2011 | 1997 Chevrolet Blazer

1 Answer

Rear brake line was removed and now i need to bleed the system 1997 chevy blazer any special tools needed ?


you need a 1/4 or 5/16" wrench and procedure requires bleeding all corners staring with furthest away from master cylinder working your way closer (Rt Rr, Lt Rr, Rt Frt, Lt Frt)

Mar 02, 2011 | 1997 Chevrolet Blazer

1 Answer

I have a 1997 chevy blazer that has a brake fluid leak just underneath passenger rear seat on drivers side and cannot find how to see what the heck is leaking what is the best procedure to figure out what...


you most likely have a brake line rusted threw, cut the line ahead of the leak and after the leak and splice in a new piece of brake line, it will have to be steel, you can not use rubber. if you take the line to a parts store they can size it up and get you a piece of steel line and some pressure fittings to put it back together, after you repair the line then you will need to bleed the rear brakes.

Feb 17, 2011 | 1997 Chevrolet Blazer

1 Answer

Replace brake light switch 1997 chevy blazer


If I remember correctly, it is clipped onto the support for the brake pedal, near the top pivot.

Dec 20, 2010 | 1997 Chevrolet Blazer

1 Answer

I have a rusted out rear left brake line on my 1997 blazer. Is there a replacement and how difficult a job is it?


you will need a shop to make up a new line. install it and bleed the brakes. hopefully the rest of the lines are ok. Sometimes if the bleeders are rusted, you may need even more parts replaced.

Dec 14, 2010 | 1997 Chevrolet Blazer

1 Answer

1997 Chevy Blazer - I believe I have a brake line leak right below the passenger door on the driver's side. How difficult is this to get to and replace?


This could be very difficult due to access and being able replace line from its 2 union points. you will have to purchase stright brake lines and bend to fit then bleed the brake system

Jul 24, 2010 | 1997 Chevrolet Blazer

1 Answer

S 10 1997 Chevy Blazer brake locking up


Common cause is the drums and brake shoes need to be replaced. When there no longer within the the specification for the brakes to work properly, the self adjusters will over adjust the brake shoes and you'll have the feeling of the rear drum brakes lock up as the shoes will bind up along the drums. Replace both Shoes and Drums and this can be done on your own will common tools and a simple brake spring tool that you can pick up at Auto Zone or Parts Source and both can give you the step by step instructions to replacing the rear brake system. Good luck and be safe.

Feb 21, 2010 | 1997 Chevrolet Blazer

1 Answer

1999 Chevy S10 Blazer 4x4. Replacing rear pad's,& Bleeding Breaks


have one person in the blazer pumping the brake pedal and then hold to the floor, crack the bleeder then tighten, release pedal, repeat till all air is out one side at a time, if this does not work then your ABS unit is bad witch if u follow your lines from your master cylinder u will find a black box with a motor on it, or the master cylinder itself is bad, it also can cause u to have no pedal, replace the master cylinder first, most likely cheaper.

Mar 11, 2009 | 1997 Chevrolet S-10 Pickup

Not finding what you are looking for?
1997 Chevrolet Blazer Logo

670 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8531 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...