Question about 1989 Isuzu Pickup 2WD

1 Answer

Turn signls dont work

Turn signals don't work bulbs are good fuses are good

Posted by on

  • patm58 May 08, 2009

    My situation was slightly different 1989 Isuzu PU.The Turn signal one side worked fast in the R.R. Not at all F.R. Problem was the F.R. Socket behind the rubber cover was corroded & rusty.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

Could be the switch or the turn signal relay

Posted on Apr 21, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Mazda b2000 1986 truck turn signls dont work replaced fuse flashers work but no turn signles


You do not replace any parts, until you find a problem

The manual you have, has to be a wiring diagram book

You study that & then do some testing to find the problem

Dec 05, 2014 | Mazda Cars & Trucks

2 Answers

How to fix turnsinal in 1991 pontia sunbrird


Bulbs burned out, Flasher bad or the turn signal switch under the steering wheel.

May 09, 2014 | 1991 Pontiac Firebird

1 Answer

How do i fix my blinkers on my 1971 f100 ford ?


There is a flasher unit for the turn signals, separate from the hazard flasher, that is under the dash. If the fuse for the turns is good, and you already know the bulbs are good since the hazards work, then you may have a bad turn signal switch.
When you use the turn switch, do the bulbs come on and stay on, or nothing? If they come on and don't blink, then it's probably a bad turn flasher unit. If they don't come on at all, suspect a bad turn signal switch. But first check the fuses, then pull off the connector to the turn switch and see if you have one hot wire there, with key on. That one hot wire will be from the fuse.

Mar 01, 2012 | Cars & Trucks

1 Answer

Why turnig lights not working when i hit the switch?


If the bulb where burnt out the turn signal would flash faster than normal. I can't imagine that all four bulbs would be burnt out as Thomas suggested. This would be the only possible way that the bulbs would cause the turn signals to completely stop working.

Here is what I would suggest. If the turn signal arrows in the dash illuminate along with all the turn signal bulbs but they just don't flash than replace the flasher.

If nothing illuminates than than first male sure that the tunr signal fuses are good. If they are let me know and i'll get you some more diagnostic info. It is still likely the flasher but it isn't that difficult to check out to make sure.

Thank you for using FixYa.com!

Feb 01, 2012 | 2001 Kia Sephia

1 Answer

My turn signals don't work but the hazzards flash


if your hazzards flash, that means your bulbs will be good but, your turn signal fuse is blown. you should check that first, & don't forget to turn off your hazzards before you can see if your turn signals work again. give it a try.

Dec 01, 2011 | 2000 Dodge Caravan

1 Answer

My saturn signal light work sometime than go off if it the flasher please tell me there it is in my car


IF TURN SIGNAL LIGHT DONT WORK SOME TIMES.CHECK FOR BLOWED OR LOOSE FUSE.CHECK TURN SIGNAL BULBS AND CHECK BULB SOCKETS FOR CORROSION.CHECK TURN SIGNAL FOR BAD GROUND.USE JUMPER WIRE BETWEEN GROUND SIDE OF THE TURN SIGNAL BULBS AND A GOOD CHASIS GROUND.IF ALL IS GOOD TURN SIGNAL SWITCH IS BAD OR FLASHERS GOING BAD.TURN SIGNAL FLASHER LOCATED ON CENTER CONSOLE SIDE PANEL GRASP THE FLASHER UNIT AND DETACH IT FROM THE FUSE BOX.IF YOU HAVE EARLY MODEL VECHICLE FLASHER UNIT LOCATED AT THE FRONT OF THE FUSE BLOCK.

Aug 23, 2011 | Saturn LS Cars & Trucks

1 Answer

Headlight dont work


first start by check there is power gos to the front head light is yes change the bulb if not there is a conecter located close to the battery chech this also if everything is ok check the fuses under hood and in dash fuse box if everything is good change the light switch (turn signl switch )

i hope its help dont forget to rout me thanx

Mar 15, 2009 | 1995 Nissan Pickup

2 Answers

No rear turn signals, front turn signals light but dont flash


bulbs might look good but it dont mean they are. I suggest changing the bulbs.

Jan 17, 2009 | 1999 Cadillac DeVille

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

248 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...