Question about 2008 Dodge Charger

2 Answers

The 2008 Dodge charger will not start, no radio,no fan. Fuses ok.

The fan,radio, and no insrument ligts are on for use. When the key is turned I see no lights , or hear any sounds. The key alert gong is working. The front and rear fuse blocks were checked(BATTERY about 12.5V). The car was working fine ;then it would not start(first time no start).The relay blocks were reseated, with all connections checked.
The past :the radio failed, with no power windows; but a cycle of the key and it work fine ,with all functions.

Posted by on

  • twilbur35 May 07, 2009

    2008 Dodge charger will not start, no radio, no fan. fuses ok.

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

I had the same problem last night seems like the ignition is a problem with those cars i called a towing and while i was waiting i kept on trying to start and suddenly it started just as the towing showed up seems like the key is very fragile even just rubbing it on your clothes or even run it tru your hair can **** it up so the car won t recognize the code see your dealer

Posted on Jun 19, 2010

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 70 Answers

Check ignition switch

Posted on Apr 19, 2009

  • rafael ochoa Aug 16, 2013

    hey i m having the same problem in my 2008 charger any help would be appreciated thank you

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The alert chimes don't work and the signal lights don't click.


Do you have the factory radio in or did you put an aftermarket one in ? Chimes function through the radio a driver door speaker !

Mar 05, 2017 | 2007 Pontiac G5

1 Answer

05 malibu classic no radio sound sometimes


The bcm controls that device for the addition of features like blue tooth and hands free, on-star etc.

Apr 21, 2014 | Chevrolet Malibu Classic Cars & Trucks

1 Answer

Radio sound sometimes and not


IF the speakers are in the doors then the wiring harness in the door-jam is frayed, and you must cut the rubber to access the wires between the door and the door jam to get at the wires without taking the door apart.

Apr 21, 2014 | 2004 Chevrolet Impala

1 Answer

Hyundai accent 2001 will not start all lights work radio works heater fan works battery in 3 months old when I turn the key all i hear is a humming sound for about 1 min. than nothing. weather has be


The humming would be the fuel pump coming on. It should only hum for a few seconds, then shut off.
Your problem is with the start circuit from the battery to the starter, or from the ignition switch to the starter solenoid. Check the connections at the starter (the big cable) for tightness.
Is the battery charged up enough to turn the engine over? Check by turning headlights on and observe while someone turns key to crank. If they dim a LOT, then either battery is too low, or the starter is bad and needs removing for testing. If brightness doesn't change, then the circuit from ignition switch to starter solenoid is likely not working. Check for 12 volts at the small wire to starter solenoid with key in cranking position. If you have power there, the solenoid may be bad. Remove starter for testing. If no power at solenoid in starting position, then either the ignition switch is bad or the neutral safety switch might be the problem, or the wiring from the switch to the starter solenoid is not passing current.
Good luck.

Jan 14, 2012 | Hyundai Accent Cars & Trucks

2 Answers

I posted this a little bit ago but forgot to mention The car would not crank. I started the car and it just dies. Wlould not start or even crank. When I put the key in the egnition (and NOT turning the...


check to make sure yu have 12v at the battery, once you do turn the ignition to start, if nothing, check the fuse and relays that control ignition, if all is good then the click sound is coming from the starter, have the solenoid replace.

Jul 31, 2009 | Saturn SL Cars & Trucks

1 Answer

I started the car and it just died. Would not


you may be out of gas or have a bad fuel pump

Jul 31, 2009 | Saturn SL Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

2,145 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8531 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...