Question about 1996 Eagle Vision

1 Answer

1996 eagle vision severe miss when put into drive

I am trying to buy this car. The owner said after they had a timing belt put on the car started to miss bad. took it back and put it on diag. and everything the diag. said was brand new. The car idles fine but when in gear it starts missing. Thanks

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 88 Answers

If this a three five v 6 tha timing belt could be off one tooth you can also youse a cheap timing light to check each plug wire at a time look for no fire or erratic spark

Posted on May 21, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Loud grinding noise within the engine and stalling after braking hard

Flex plate is cracked. That is another reason it stalls.

Nov 08, 2011 | 1996 Eagle Vision

1 Answer

My mom has an 1996 eagle vision. it died on her. no noise. we replaced the water pump thermastat timing belt that melted and broke plus the timing belt tensioner. the car rolls over smoothly but does not...

Remove the spark plugs and run a compression test. I'd guess you will have low-to-no compression. Two likely causes:
1: you did not get the crankshaft and camshaft correctly aligned when you put the new belt on. If this is the case, all cylinders will have about the same compression, but will be very low. Are you absolutely sure that you got the timings marks correct when you put the belt on?
2: the valves were damaged when the belt broke, open valves and pistons coming up. Talk to the parts department of you local Chrysler dealer, and ask if this engine has "negative valve clearance". If that's the case, you will need to pull the head and have the valves repaired. In this case, a few cylinders may have good compression and a few others may have low-to-no compression.

Of course it it also possible that you failed to connect something when you put it back together, and you are not getting spark or gas. Test for that first.

Apr 28, 2011 | 1996 Eagle Vision

1 Answer

Very wobbly and bouncy front end

I have a 1996 eagle vision and it started doin the same thing so i put 2 new motor mounts and a new oppion rack assemble and it dont woble or shakes anymore so try that.

Oct 16, 2010 | 1996 Eagle Vision

1 Answer

Changed water pump in 96 Dodge Eagle Vision and still overheating

look to thermostat, and see if your belts arent slipping, using a radiator flush then replacing coolant could help too

Sep 19, 2010 | 1996 Eagle Vision

1 Answer

When should i change the water pump in a 1996 eagle vision tsi

Change the water pump when it starts leaking or, if you have over 100,000 miles on the car, and you are doing additional work like changing the timing belt. If it will give you peace of mind, go a head and change it. Otherwise, leave it in the car and let it work.

Sep 06, 2010 | 1996 Eagle Vision

1 Answer

Water pump on a chrysler 1996 eagle vision

If you have a V-6 engine. The timng belt is located under the timing belt cover on the fornt of trhe engine. The water pump is driven off the timing belt. If you change the water pump,you should change the timing belt at the same time.

Jan 26, 2010 | 1996 Eagle Vision

2 Answers

1996 Vision Eagle runs rough and stalls when started

BCM I believe on that should be behind glove box area. You'll have to remove knee guard from door to radio, to see it up under near glove box area, screws & brackets holding up there. As far as disabling it, a little google work or go on a forum, you may get info, but sounds like circuit board has to be modified with jumper wire or something. Have you tried unlocking passenger door with key(s) to see if that will disable security system?

May 18, 2009 | 1996 Eagle Vision

1 Answer

Spare motor parts for chrysler vision 1996

there are lots of used auto part websites. go to yahoo and type in used auto parts and im sure you will find something

Mar 20, 2009 | 1996 Eagle Vision

1 Answer

My eagle vision radio is not worrking i need the owners manual

check fuse 2 and 13 in the fuse block inside the car

Dec 03, 2008 | 1996 Eagle Vision

Not finding what you are looking for?
1996 Eagle Vision Logo

Related Topics:

125 people viewed this question

Ask a Question

Usually answered in minutes!

Top Eagle Experts


Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Stewart Dibbs

Level 2 Expert

308 Answers

Are you an Eagle Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides