Question about Toyota Sienna

1 Answer

2002 Sienna passenger side power door opens automatically, but will not close once opened. Have to disengage and close manually.

Posted by on

  • 1 more comment 
  • JIMMY SMITH May 11, 2010

    TURN POWER TO DOOR OFF THEN PRESS THE OPEN/CLOSE SWITCH 8 TIMES IN 10 SECONDS LOOK FOR THE PWR DOOR LIGHT TO START FLASHING COUNT THE FLASHES EXAMPLE 2 PAUSE 2

  • Anonymous Mar 25, 2014

    power door won't close sometimes

  • Anonymous Mar 25, 2014

    poer door won't close

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 160 Answers

SHOULD YOU GET A 2-2 CODE YOU WILL NEED A SLIDING DOOR ECU

Posted on Apr 19, 2009

  • JIMMY SMITH Apr 19, 2009

    turn power to door off and push the open/close button 8 times in 10 seconds watch for the door light in the combo meter to start flashing. count the number of flashes example2 pause 2

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does the power window button blink on and off and the automatic feature doesn't work in the 2008 Toyota Sienna?


NOTE:
Anytime the batteryterminal has been disconnected, please initialize the driver's door power windowand front passenger's door power windowafter reconnecting the batteryterminal.

With ignition switchin the "ON" position, do the following:

1. Push down and hold the driver's door power windowswitch to completely open the window.
2. Pull and hold up the driver's door power windowswitch until the window closes.

Continue holding the switch for approximately one second until the switch changes from blinking to a constant illumination.
3. Check for proper operation of the "one-touch open and close" function by fully pushing the switch briefly to the "DOWN" and "UP" positions.

At this time the power window switchfor the passenger's door windowshould be blinking.
4. Push down and hold the passenger's door power windowswitch to completely open the window.
5. Pull and hold up the passenger's door power windowswitch until the window closes.
Continue holding the switch for approximately one second until the switch changes
from blinking to a constant illumination.
6. Check for proper operation of the "one-touch open and close" function by fully pushing the switch briefly to the "DOWN" and "UP" positions.

Feb 09, 2016 | Toyota Cars & Trucks

2 Answers

Our passenger side power sliding door doesn't open


Check out the wiring. Sounds like something is loose or the switch may be going bad.

Mar 10, 2010 | 2004 Toyota Sienna

2 Answers

Sliding door fails to latch


There is no "switch". The Sliding Doors should be manual anytime you try to open or close them. If not: then there is problem in the electronic system or the physical/mechanical side where something is jamming the door from opening or closing.

Dec 31, 2009 | 2002 Chrysler Town & Country

3 Answers

2005 Toyota Sienna XLE - Automatic sliding door not closing.


This may or may not work depending on exactly what is wrong with the door, I cant tell what is wrong without looking at it directly however:
You can try starting with all doors closed and unlocked, keys in hand disconnecting the battery and letting the vehicle sit for 2 min or so, then reconnect the battery. Put the key into the ignition and turn it to the on position but do not start the van. Next press the button to disable the power sliding door for the drivers side, then manually open the door fully, wait 5 seconds, then close it manually fully. Press button the button again to re-enable the power sliding door, then try to use it with the automatic feature either by pulling the handle or using your remote, this may or may not work depending on if the door has somehow become de-initialized (it should work now) however if something is broken inside the door closing mechanism or door closed/open sensors, the door will continue to malfunction.

Aug 23, 2009 | 2004 Toyota Sienna

1 Answer

I have a sicna 03 sliding door on passenger side


DO NOT PUSH IT!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
1. turn off the power button for the power sliding doors located on the lower dash area.
(in for on out for off)
2. close the sliding doors
3. disconect the battery and wait 1 minute.
4. reconect the battery, turn on the power switch
5. use one of the door control buttons open and close the door this should reset the door.

If this fails to get it working i'm sorry but you will need to take it to a dealer.
and most likly it will need a new drive $3000 aproxmatly. it can not be serviced

May 06, 2009 | 2003 Toyota Sienna

1 Answer

2002 Toyota Sienna Simphony - elect. rear slidding door won't open but does close


Might be similar - might not. I occasionally have this problem and a problem with closing at times. really bugs me as I cant recreate the problem. Here's what i do ( electronically unlock the door, then manually unlock and relock ( big tab at eye height on the door ) try, open door manually , close and repeat.
Not sure why it does this - but I think I have done this routine a dozen times over the years and something in the sequence gets it all thinking straight again. best of luck to you.

Oct 12, 2008 | 2002 Toyota Sienna

2 Answers

2000 Toyota Sienna passenger side door won't close


Its probably the motor reverse cycle going out.yes, you can repair it yourself, but alot easier to have a mechanic do it. It could be a headache . Good luck. Hope this helps.

Aug 25, 2008 | 2000 Toyota Sienna

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

545 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...