Question about 1998 Mazda B-Series

1 Answer

Mazda b 2500 how to set timing when the timing belt has broken in

How to set timing when the timing belt has broken into? what are the timing marks Crank shaft(?) Cam shaft(triangle) oil pump (diamond) should be a timing mark on crank shaft pulley?any diagrams pictures would be helpful. mazda b 2500

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mazda Master
  • 1,757 Answers

My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.

I do not know if you still need this information, but I am going ahead and answering it anyway. You may want to Print the Diagrams for future use.

CLICK
on the following LINK. It has the Timing Belt and Mark(s) Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Again my apologies...
http://www.2carpros.com/car_repair_information/year/1998/make/mazda/model/b2500/1998_mazda_b2500_timing_belt_diagram_marks.htm

Posted on Mar 07, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi. i need timing marks for a 2002 toyota camry 2.2. An image with the mark would be great. Thank you


The camshaft timing mark is on the cam seal housing there is a hole in the cam sprocket use a mirror to see the mark it’s in the 12:00 position. The crank mark is on the oil pump housing and a triangle notch on the crank sprocket

Oct 26, 2017 | Toyota Cars & Trucks

1 Answer

How to replace the timing belt on a 1994 mazda 929 3.0 dohc 24 valve engine


Choose:

1994 Mazda MPV timing belt replacement, 6 cylinder DOHC ...

? 3:46
https://www.youtube.com/watch?v=sD2G-NzycvU
Aug 11, 2011 - Uploaded by rsarp
1994 Mazda MPV timing belt replacement, 6 cylinder DOHC 3.0... engine so the valves would not be bent ...

How to replace the timing belt on a 1994 mazda 929 3.0 ...

www.fixya.com/.../t25991928-replace_timing_belt_1994_mazda_929_3...
4 hours ago - how to replace the timing belt on a 1994 mazda 929 3.0 dohc 24 valve... I have a 2000 Mazda 626 4cyl 2.0 liter DOHC engine replacing the timing belt, what ... 2004 6s, 3l. where is the canister purge valve solenoid located?

Where are the timing marks on a 1994 mazda 929 3.0l - Fixya

www.fixya.com/cars/t25991952-timing_marks_1994_mazda_929_3_0l
4 hours ago - where are the timing marks on a 1994 mazda 929 3.0l - Mazda Cars ...1994 Mazda E2000 Cam Timing Mark Positions to Replace Timing Belt ... on a 1994mazda v6 dohc 24 valve engine How to align the timing mark on the ...

Mazda Timing Belt Replacement



Dec 03, 2015 | Mazda Cars & Trucks

1 Answer

Hi can u pls assist me with the timing marks for this car chevy aveo 1.5 engine 8 valve 2006 model hatch back pls urgently & also head bolts torque setting


Your timing marks should be on the belt. There are two single lines and one double line across the surface of the belt. Each of the single lines line up with the cam shaft and the balance shaft drive gears. The double line lines up with the crank gear. If I remember right, there is a small mark on the oil pump housing that the crank mark lines up with and the cam mark is straight up and there are 2 other marks on the cam gear that line up with the head.

Jun 05, 2015 | 2006 Chevrolet Aveo

1 Answer

How to set the ignition timing on mazda b2600 1994.




  • ADJUSTMENTS







  1. Check engine condition (spark plugs, leaks in hoses, etc.).


  2. Turn all electrical loads OFF.


  3. Warm up engine and run for three minutes at 2500 - 3000 rpm.




Test Connector For Tachometer
Test Connector


  1. Connect tachometer and timing light to engine (white check connector).


  2. Ground test connector (green: 1-pin) with a jumper wire.


  3. Check that idle speed is within specification.

M/T: 750 ±20 rpm in neutral

A/T: 770 ±20 rpm in park

Timing Mark







  1. Check that timing mark (YELLOW) on crankshaft pulley and the mark on timing belt cover are aligned.



5°±1°BTDC



  1. If timing is not within specification, loosen lock bolt and rotate distributor housing to adjust.


  2. Tighten lock bolt to 14 - 19 ftlb (19 - 25 Nm).


  3. After adjustment, disconnect jumper wire from test connector.


I’m happy to assist further over the phone at https://www.6ya.com/expert/uttamjeet_2f3adc18600f8ede

Mar 25, 2015 | Mazda Cars & Trucks

1 Answer

What is timing belt installation sequence on a 1999 Mazda 626 6 cylinder?


set mark on crankshaft to TDC mark on timing cover. set mark on cam pulley to align with mark on head .if more than one mark on pulley rotate by hand till exhaust and inlet just rocking then align closest marks .

May 11, 2014 | Cars & Trucks

1 Answer

Belt diagram timing


I assume 4cyl?

  1. Loosen tensioner adjusting bolt.
  1. Using Camshaft Belt Tension Adjusting Tool T74P-6254-A, pry tensioner clockwise against spring tension as far as possible.
  1. Tighten adjusting bolt to hold tensioner in released position.
  1. Align crankshaft so number one piston is at TDC (top dead center) with crankshaft key pointing straight up and circle on crankshaft sprocket (6306) aligned with notch in engine front cover (6019) .
  1. Align triangle on camshaft sprocket with triangle on inner timing belt cover.
  1. Align diamond on oil pump sprocket with diamond on inner timing belt cover.

    Timing Mark Alignment

5f171ff.gif

Apr 21, 2014 | 2005 Ford Ranger

1 Answer

2001 mazda mx5 no compession timing marks perfect spark plug holes have 20 psi vacuum


Possible you broke a camshaft or one of the cam gears is not connected to the camshaft ?
Can you watch the starter turn the cam via the timing belt ?

Jun 27, 2012 | 2001 Mazda MX-5 Miata

1 Answer

87 Mazda B2600 4x4, My power steering belt broke today, and popped my alternator belt off. I replaced to broken belt and remounted the other. I drove 10 miles to my house and my alternator belt broke,


no
the alternator belt broke because of the stress applied from the broken power steering belt
good practice would required the replacement of all belts if one broke

Oct 12, 2017 | Mazda Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

1,279 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

80531 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8841 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...