Question about 1981 De Lorean DMC-12
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
TO FIT A NEW MIRROR FIRST CONNECT THE WIRING PLUGS THEN ENSURE THE FRICTION PIN ON THE BACK OF MIRROR ENGAGES IN THE SLOT (OUTER EDGE OF MIRROR) PRESS FIRMLY AT THE CENTRE OF THE MIRROR TO ENGAGE THE RETAINING CLIP....IF YOU NEED TO REMOVE MIRROR INSERT A FLAT TOOL BEHIND THE LOWER EDGE AND LEVER IT FROM THE CLIPS.. HOPE I WAS OF SOME HELP TO YOU...
Posted on Feb 23, 2009
hi there the easiest way is to remove the lower black cover 2xscrews then with aplastic spreader locate the 2 tabs that hold black cover to mirror cover and press them in and pull black cover down then with a small pry tool carefully prise mirror glass out and disconect wires this will reveal the small single screw that holds the cover to the mirror unit remove this and the rest should be self explaned hope this helps..
Posted on Nov 17, 2008
On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you can remove the bolts securing the mirror to the door.
Posted on Sep 18, 2009
Tips for a great answer:
Oct 01, 2016 | Citroen Cars & Trucks
Feb 15, 2015 | 1998 Citroen Saxo 1.1
Jun 22, 2014 | 1998 Citroen Saxo 1.1
Feb 15, 2014 | 2004 Citroen Xsara Picasso
Mar 24, 2013 | 1998 Citroen Saxo 1.4
Jan 23, 2013 | 1998 Citroen Saxo 1.6
Dec 01, 2010 | Peugeot 405 Cars & Trucks
2,497 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: