Firstly make sure you have the correct tyre pressure in each tyre.
Using the iDrive Press the menu button, the start menu is called up.
Press the controller to call up the "I" menu
select vehicle setting and press the controller
select "RPA" and press the controller
Start the engine but do not drive off yet
Select "tyre pressure" and press the controller
Select yes and press the controller
Drive off the message "Initialising" is displayed
Initialising is completed during the journey. the controll display then shows Status "RPA Active" again.
This should stop your warning light from coming on
air system completely went out without warning from one day to the next. no air, no heat, no...
(More)
air system completely went out without warning from one day to the next. no air, no heat, no defrost. could this be a fuse problem?
i got back from hoilday and my bmw 325 was on the drive for two weeks, i started the car up and...
(More)
i got back from hoilday and my bmw 325 was on the drive for two weeks, i started the car up and started to reverse off drive when my power steering wasnt workin,then the eml light come on then 30 seconds later it was working, its been 3 weeks now and been fine do u think it triggerd the light coz the car just parked there for 2weeks, iv had dinos check and thay said its the lamdra senser he fitted it then it wasnt the problem now hes sayiny its the cat converter, i just think it was just triggerd by being park on drive.