Question about 1998 GMC Jimmy

1 Answer

Remove fuel pump lines quick disconnect

1998 gmc fuel pump line removal. the tool I have is e=3/8 and a f=5/16 can't see how these would work or even fit

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that got 5 achievements.


    Visited the website for 3 consecutive days.


    An expert who has answered 20 questions.

  • Contributor
  • 32 Answers

I did not have to use  them a simple miniature flathead screw driver works fine the "special"tool is a waste of time

Posted on Oct 03, 2009


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

  • 2035 Answers

SOURCE: recharge ac

Please use this link:

Good luck...

Posted on Jul 29, 2008

  • 2920 Answers

SOURCE: remove fuel lines from tank (quick disconnect) 2006 f-250 diesel

yes there are 2 lines the feed line and the return line

Posted on Dec 06, 2008

  • 409 Answers

SOURCE: what type of fuel line removal tool 4 99 chev malibu?

It should use the white nylon release tools. I think there are 5-6 in the set,

Posted on Dec 25, 2008

  • 1779 Answers

SOURCE: removal of fuel lines from fuel pump assembly

The lines can be disconnected w/out a special tool, but u can pick one up a set for different size lines at any auto parts store for a few bucks, and it'll make the job easy. W/out the tool, you'll probably damage the connection trying to separate it.

Posted on Dec 27, 2008

  • 8 Answers

SOURCE: 1997 gmc sierra p/u 5.0l 2wd needs fuel pump

NO dont drop tank, you will be sorry, take bed off, only like 6 or 8 bolts, and you will have more room to work, and its a pain in the *** to undo the lines and drop the tank, you cant get in there to do it, but just basic tools nothing special, be sure and try not to make any sparks while takein off that ring to get the pump out, and put an ac delco pump on there

Posted on Feb 11, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Remove fuel pump for 1998 GMC Sierra

Here are 2 links to see how to change,so here is the first one.Here's the second one.You will need to relieve the fuel pressure first,click here to see how.Ask Autozone to borrow that special tool,they have a tool-loaner program.

Jan 18, 2013 | 1998 GMC Sierra

1 Answer

How do I dissconnect the fittings on the outside top of 1998 s10 pickup fuel tank for removal to replace the fuel pump.Seems impossible to know how to understand how the fittings work.

the fuel lines on this vehicle are held on by a clip that is just inside the fuel line itself .it is circuler and made of plastic. just past that is a raised ridge that the clip holds onto(you cant see the ridge) if you want to remove the clip their is a special tool that you can buy ( normally come in a set of different sizes) they are fairley cheap . if you dont want to buy the tool you might be able remove the clip by using a screwdriver to pry the clip as evenly as posible all the way around the line( havent tried it myself as i have the disconnect tools .but have been told it can be done. be carefull not to damage the clip

Dec 02, 2010 | 1998 Chevrolet S-10 Pickup

1 Answer

How do you replace a fuel pump in a 1997 ford f350 crew cab

Removal & Installation 88285g11.gif

Details of the fuel pump assembly
Click to Enlarge 88285g12.gif

View of the fuel pump
Click to Enlarge

  1. Disconnect both battery ground cables.
  2. Properly relieve the fuel system pressure.
  3. Raise and safely support the vehicle securely on jackstands.

The electrical connector is located behind the fuel pump near the frame rail.

  1. Detach the fuel pump electrical connector.
  2. Remove the fuel line retaining clip and discard, then remove the fuel line from the fuel pump.
  3. Slide the clip up and off from the quick connect fitting. Insert the fuel line tool and remove the fuel pump delivery line.
  4. Unclip the brake lines from the fuel pump bracket.
  5. Loosen the pinch bolt and spread the mounting bracket.
  6. Remove the fuel pump.

To install:

  1. The installation is the reverse of the removal.

Oct 29, 2010 | 1997 Ford F350 Crew Cab

1 Answer

How difficult is it to replace the fuel pump on a 1998 ford explorer

it is in the fuel tank. you have to disconnect the fuel inlet hose at the tank, 2 tank strap bolts while supporting the tank with a jack. then use the jack to lower it enough to reach up and remove the "quick disconnect" fuel lines from the sending unit/pump asm. (special tool required) Then drop it down, remove the retaining ring from the top of the tank and pull the entire sending unit/fuel pump asm. straight up and out...reverse procedure to install the new asm.

Jun 26, 2010 | 1998 Ford Explorer

2 Answers

How do i replace fuel pump on 1998 escort se 2.0

Removal & Installation WARNING Extreme caution should be taken when removing the fuel tank from the vehicle! Ensure that all removal procedures are conducted in a well ventilated area! Have a sufficient amount of absorbent material in the vicinity of the work area to quickly contain any fuel spillage. NEVER store waste fuel in an open container, as it presents a serious fire hazard!

This procedure will require a new fuel pump gasket for pump installation, so be sure to have one before starting.
  1. Relieve the fuel system pressure.
  2. Disconnect the negative battery cable.
  3. Remove the rear seat cushion and unplug the electrical connectors from the fuel pump.
  4. Unfasten the four pump access cover screws and remove the cover.
  5. If equipped, unplug the pump electrical connector located under the cover.
  6. Unfasten the fuel line clip(s) and disconnect the line(s) from the pump.
  7. Use a fuel pump locking ring removal tool or a brass drift and a hammer to unfasten the pump locking retaining ring.
  8. Remove the fuel pump and the gasket from the tank.


To install:
  1. Install a new gasket and place the pump into position in the tank.
  2. Install the pump locking retaining ring.
  3. Connect the fuel line(s) to the pump and install the line retaining clip(s).
  4. If equipped, attach the fuel pump electrical connection(s).
  5. Install access cover, then tighten the retainers.
  6. Attach the pump electrical connector(s).
  7. Install the rear seat cushion.
  8. Connect the negative battery cable.
  9. Start the car and check for proper operation.

May 13, 2010 | 1998 Ford Escort

2 Answers

How do I remove fuel lines from the fuel pump


Sep 05, 2009 | 1998 GMC Sierra

2 Answers

Removal of fuel lines from fuel pump assembly

There is special disconnect tool just for 98-00 classic CK pickups. Lisle makes them they are a two piece plastic tool that is pretty cheap to buy. Do not buy a regular disconnect tool bcause they will not fit in the lines at the pump. The lisle number at Carquest is 37500. Please rate.

Dec 27, 2008 | 1998 GMC Sierra

Not finding what you are looking for?
1998 GMC Jimmy Logo

Related Topics:

876 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts


Level 3 Expert

78267 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides