Question about 1996 Dodge Neon

2 Answers

Replaced battery now car does not start. car stsrted before replacing battery

Relaced battery now car does not start. car started before replacing battery

Posted by on

  • trcycffy Apr 19, 2009

    1996 dodge neon sport replaced battery now car will not start everything else works fuel pumps kicks on door locks work lights work ect. engine does not wind over. car stared before replacing battery

  • Mike Butler
    Mike Butler May 11, 2010

    Does engine wind over at least ? Check all fuses and relays, under dash & under hood.

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dodge Master
  • 5,370 Answers

Car not starting or turning over indicates towards multiple possibilities. It can be issue with battery or weak battery. But if battery checks out ok, then it can be starter issue or faulty alternator or problem with low fuel pressure or no spark at spark plugs due to dirty spark plugs or faulty ignition coil or injectors getting cracked or dirty and needs to be cleaned.


To confirm the problem, the basic troubleshooting is required.


Click this link below and follow the troubleshooting:------

http://technoanswers.blogspot.in/2012/02/car-starting-issues.html

---------

This will help.

Thanks

Posted on Feb 18, 2012

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dodge Master
  • 6,674 Answers

No click, nothing? Double checked all connections at battery? Did you locate start relay & check for power to it? Tried moving shifter through gears while trying to start?

Posted on Apr 19, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Relaced altanator / battery and battery cables but still wont charge


If you have replaced the alternator and battery there is not much left to check. Check that the light guage wire is connected to the alternator. Not the heavy guage wire that goes to the battery. There is always another lighter guage wire that is plugged somewhere on the back of the alternator which allows the alternator to start making power and is connected to the red light on the dash. If this is connected, then I would suspect that you have a wiring fault somewhere that is not supplying power to this wire when you start the engine. Next stop would be an auto electrician to look for wiring faults.

Feb 25, 2016 | Cars & Trucks

1 Answer

Replacing battery cables on 1990 300zx


I have a 1996 300ZX Fairlady Left hand drive. I tried replacing the battery. Now the head light flash and wont start. WHY? must I reset? and Where?

Mar 17, 2013 | 1990 Nissan 300ZX

1 Answer

Jaguar 2004D electrical problem! It's start some


Been there, done that!!!(LOL) Check your battery terminal cable and make sure that it is tight enough.If may need to be relaced if it is old and rusty. Try auto zone for this. If that fails, go to Auto zone and have them test your battery. It may be time for a replacement. As far as that light, it may be an 02 sensor or catalytic converter. I love my car and have to replace these. May be cistly, but if you love the car, repair it!

Jul 22, 2012 | 2002 Jaguar X-Type

1 Answer

I recently relaced my starrter for my car and when I went to start it up nothing happened. I checke the battry and the starter nothings wrong with them


Does the car make any noise when you turn it over? If it clicks when you turn the key the battery is dead. Quickest way to check a battery is to switch your high beam on. Get out and check the lights. If they are dim then the battery either needs charging or replacing.

How old is the starter? New or used?

Jan 18, 2011 | 1997 Hyundai Accent

1 Answer

Replace module on dist also relace coil engine starts with a power boost from a outside source but will not start without a boost battery seems ok


Try the "Pick Up Coil" its located inside the distributor, you will have to disassemble distributor to replace it, if you don't want to deal with the hassle just replace the distributor with a used one. I have a 1990 f-150 that was having the same problem, after replacing several parts I finally found the problem, Pick Up Coil. Good Luck.

Nov 01, 2010 | 1991 Ford F150

2 Answers

04' Ram 1500, bad mis-fire. cust repl s/plugs. no help. Codes for coils #7 & 8 w/mis-fire. replaced coils & wire set. Better, but still P0300. Compression good


You still have random misfires (PO300)
You most likely replaced those coils that set a code, and those were not the one bad offender,spiking the computer module.
Take a new coil and put in a cylinder,no change, replace old coil and move new one to next cylinder. You can do that once or twice a day, if you have nothing else to do. You need a 90 degree day, to really get that solved,unless you have an ignition oscilloscope.
Never had a bad spark plug in 45 years.

Sep 18, 2010 | 2004 Dodge Ram 1500

2 Answers

Car won't stay on when given fuel


did u try replacing the fuel filter

Aug 28, 2009 | 1993 Mercedes-Benz 190

2 Answers

I have a 2001 F 350 ford diesel . Started it up ,no brakes, no power stearing. Fluid on the ground, both pneumatic lines to brakes blown off. leaking fluid out of the power stearing line, blew connecting...


the hyrdra boost supplies pressure to these systems, that is done throught the power steering pump, the line or the pump is defective, I would replace both.

Jul 21, 2009 | Ford F-350 Cars & Trucks

Not finding what you are looking for?
1996 Dodge Neon Logo

209 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...