Question about 1998 Ford Expedition

1 Answer

No. i need to find the fuse for my alarm system. and i don't have a manual

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 4,369 Answers

Section 13-11: Anti-Theft System, Active 1998 Villager Workshop Manual DIAGNOSIS AND TESTING Inspection and Verification

  1. Verify customer concern by operating the anti-theft alarm system.
  1. Visually inspect the following components of the anti-theft alarm system:


    VISUAL INSPECTION CHART Mechanical Electrical
    • Door lock key cylinders binding
    • Loose hood anti-theft switch
    • Blown fuse(s):
      • 7.5A S.E.C.
      • 10A ELECTRON (IGN)
      • 30A PWR WDW
      • 15A HORN
    • Damaged circuit breaker #1
    • Damaged or corroded anti-theft relay
    • Broken or loose wiring
    • Damaged,loose or misaligned hood anti-theft switch
    • Damaged or loose luggage compartment lamp switch
    • Damaged or loose door courtesy lamp switch(es)

  1. Verify that the following systems are operating correctly:
    • Horn.
    • Headlamps.
    • Instrument cluster and panel lighting.
    • Power door locks.
    • Keyless entry remote transmitter (if equipped).
    If any systems are not functioning properly, refer to the appropriate section of this service manual for diagnosis and testing before proceeding.
  1. Check wiring harness for obvious signs of looseness, corrosion, or damage.
  1. If the fault is not visually evident, determine the symptom and proceed to the Symptom Chart.

Posted on Apr 24, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I can't find the alarm fuse on my 1997 Blazer


Didn't come with an alarm. Only Keyless Entry System. If you have an alarm, it was installed by someone after manufacture.

Dec 28, 2012 | 1997 Chevrolet Blazer

1 Answer

2001 fuse map car alarm


Fuse box layout diagrams are in the owners manual. If you don't have this manual you can download one fro free at the GM customer site online 24 hours a day.
Click HERE

Aug 29, 2012 | 2001 Chevrolet Tahoe

1 Answer

What name or acronyms would be for the fuse to the aftermarket security system?


Aftermarket alarm systems do not have there fuses in the cars fuse boxes, the fuses are located in line to alarm system.
You will need to look under the driver side of the dash and locate the alarm box, and then follow wires back a little, there you will see a few fuse holders containing the fuses for that alarm system good day

Jul 01, 2012 | 2005 Kia Spectra

1 Answer

Disable alarm system


Try this http://adf.ly/3pDUa

Nov 22, 2011 | 2001 Dodge Durango

1 Answer

Is there any thing I can do to get my theft light to stop blinking plus my 2002 nav want start help help stick out of town


Thanks for choosing FixYa and welcome to the site. The alarm is what is causing the vehicle to not start. You may be able to pull the fuse for the alarm to get it started. There should be a code that can be entered to reset the alarm. Check your owner manual. If not, you may have to contact the dealership to get the code to reset the alarm. Try not to use your key fob to unlock the doors as this will only keep the alarm on. I doubt anything else is wrong with the vehicle. The security alarm will kill the vehicle and cause this. If the fuse doesn't work, you need that code. You may be able to take off the hot side battery post for a few minutes and reset everything. Once you do, don't use the key fob for nothing.

Aug 21, 2011 | 2002 Lincoln Navigator

1 Answer

My alarm went off after I jumped my car


The below Installation Caution(s) & Warning(s) was taken from my CS-2000 Series III CrimeStopper Alarm System manual:

" WE RECOMMEND that the MAIN SYSTEM FUSE be REMOVED before jump starting, using a battery charger, or changing the battery. A voltage surge or high boost condition could damage alarm circuits."

There you go. You will probably need a new Alarm System. If possible,get the same model so that it will save you time to install, just swap the two main alarm modules.

Nov 24, 2009 | 2010 Honda Insight

1 Answer

After installing a new battery, the radio does not work


hello,for your radio,you need a radio code,if you don"t have ask your dealer to provide the code,alarm system is always activated when you lock the vehicle,ty

Apr 18, 2009 | 1997 Mercedes-Benz C-Class

Not finding what you are looking for?
1998 Ford Expedition Logo

Related Topics:

473 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...