Question about 1994 Honda Accord

1 Answer

Can I change my brakes to change my bolt pattern?

I have a 1994 honda accord, with a newly purchased set of 5x114.3 honda wheels... my current bolt pattern is 4x114.3... can I put new brakes on the car to change the bolt pattern?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 36 Answers

No
You will need to change the Hubs THEN the brakes to fit the hubs.
But changing the brakes only will NOT change the pattern

Posted on Apr 19, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can you put 16" tires


Yes you can. Many of the later 90's trucks came factory with 16" wheels and share the same bolt pattern. Be careful you don't purchase 6 lug wheels which the 4wd trucks use.

Sep 08, 2011 | 1994 GMC Sierra

1 Answer

I have a 1992 honda accord lx and i wanted to know if my EXEL hs 113 rims will fit? it is a 4 lug but it has like 8 holes


The wheels sound like a multi-fit, they have 2 different bolt patterns. chances are they will fit - try one one the car and make sure you have clearance both outside on the fender and inside with steering items and brake parts. Also make sure there's enough tire clearance when turned lock-to-lock when the suspension is compressed.

Feb 03, 2011 | 1992 Honda Accord

1 Answer

Hi haw can i change my wile Bering?


Park the car on level ground. Put the transmission in park and set the parking brake. Jack the car up and place the jack stands underneath the frame of the car.

Use the tire iron to remove the lug nuts from the wheel and pull the wheel off.

Use the ratchet set to remove the mounting screws on the disc brake caliper. Pull the caliper loose and then slide the disc off of the wheel studs.

Use the ratchet to loosen and remove the wheel hub mounting bolts located on the backside of the steering spindle.

Pull the entire wheel hub assembly off of the steering spindle. Take the assembly to a machine shop and have them use a hydraulic press to press out your bearing (the bearing is pressed into the hub assembly and is too big for at-home extraction).

Press in the new wheel bearings and then reassemble the wheel hub by mounting it on the steering spindle again.

Slide the disc back into place on the wheel studs and then remount the caliper with the mounting bolts. Slide the wheel back in place on the studs and tighten down the lug nuts in a star pattern.

Lower the car off of the jack stands or move on to change the other side's wheel bearings as well.

Oct 20, 2010 | 1991 Honda Accord

1 Answer

Over heating brakes in hot weather with a strong smell


When was the last time your brakes where replaced. Your rims can get hot sometimes even on short trips depending on how often you need to use your brakes. But if your pads are low and "burning up" you may want to look into getting them replaced before they cause rotor damage. You will also loose braking performance and loose stopping power.

Jul 12, 2010 | 1994 Honda Accord

1 Answer

There are 3 bolts holding the distributor to thr engine.you can see two of them, but the third one you can't see or get a wrench to it. how do i get this third bolt off? 1994 accord LX.


The distributor bolt pattern its like a triangle, you can see the top and the bottom right, the bottom left is not visible. You will need a 6" extension & 12mm socket

Feb 15, 2010 | 1994 Honda Accord

1 Answer

Vibration at 60 mph


The first thing to have checked is the wheel balance, if they are good then you need the brake system and wheel bearings checked. Please let me know if this does not help as there are a few more specific problems that could cause vibration.

Oct 27, 2009 | 1994 Honda Accord

1 Answer

How to replace front rotor honda accord 2004


1. Jack up and support car with hydraulic floor jack and jack stands
2. Remove desired wheel(s)
3. Remove the two 17mm caliper botls
4. Remove the caliper and support with a coat hanger throught the bolt hole
5. Replace the brake pads (if needed) I recommend Honda
6. Remove the top off of the master brake cylinder that is attached to the brake booster under the hood.
7. Use an appropriate tool to reset the caliper cylinder to the recessed position. (C-clamp can work too)
8. Check to see that you have not spilled any brake fluid out of the top of the master cylinder (wipe any fluid up immediatley (especially if on paint)
9. Using a impact philips driver remove the two set screws for the rotor
10. Have rotor machined or replace with a new one (recommend Honda)
11. Clean new rotors with brakecleaner (whether new or machined)
12. Reinstall rotors and new set screws (be sure to use impact driver to set them)
13. Reinstall newly loaded calipers (with new pads)
14. Reinstall two bolts on the rear
15. Remove any supports from within the wheel-well (coat hangers/wires) that were used to support caliper
16. Reistall wheel and torque bolts to 80 ftlbs.
17. Lower the vehicle slowly after removing jack stands from the rocker panel.
18. Replace the cap on the master cylinder reservoir.
19. Test at slow speeds and take it easy for a while.

Jul 13, 2009 | 2004 Honda Accord

2 Answers

Conversion fom metric tyre to imperial tyre


If you have the factory tire size of 26.6x8.9/16 your new size will be 225/60/16
26.6x8.9/16 =225/60/16


Please rate this a fixya

Jan 30, 2009 | 1994 Jaguar XJ6

1 Answer

1994 Honda Accord Rear Disc Brakes


you get all the lug nuts tight, the weight of the car on a loose lug can make that noise from the wheel, jack the car up and manually spin the tire, if you can give a more indepth description ill try to help, i have OnDemand5 if you have any other questions

Sep 09, 2008 | 1994 Honda Accord

Not finding what you are looking for?
1994 Honda Accord Logo

Related Topics:

137 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...