Question about 1999 Dodge Ram

1 Answer

How do i change oil pan on 1999 dodge ram 1500 with 5.2 magnum

No oil pressure, lifters are clacking, engine sludge

Posted by on

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dodge Master
  • 6,674 Answers

Remove dipstick, exhaust pipe, left engine to transmission mount, loosen motor mounts & raise engine slightly.(enough to slide pan back out, when ready.) Heard enough yet? Good Luck.

Posted on Apr 19, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Loosing oil pressure after changing oil and filter. if engine has sludge in it what do you use to clean sludge from engine


Did you use same weight and brand as usual, or did you change to another weight/brand?

Jan 01, 2014 | 2005 Dodge Ram 1500

1 Answer

How to change the oil pan on an 2004 dodge ram 1500 hemi


take out bolts, and the crossmember. if its 2wd, it doesnt get much easier. Be sure the oil pump pickup is clean, these engines seem to sludge up, use a good quality synthetic oil like Mobil1

Sep 14, 2011 | 2004 Dodge Ram 1500

1 Answer

2004 Dodge Dakota 3.7L V6, manual. Below


I suspect you have hydraulic lifters and the sludgy oil could plug up your lifters - as well as running that low on oil. Top off your oil and get an oil additive engine cleaner, warm your engine at idle only then change oil when warm. Add 1 quart of marvel mystery oil to the crankcase then top off with high mileage oil, like Valvoline. Run motor at idle only and see if this cures the problem - if not then you may need to remove the intake and replace your lifters, a costly and time consuming job. I would not try driving as you may waste the cylinder head or block by running a stuck lifter. There is also an oil additive specifically for stuck lifter and I think I would add that as well as the Marvel.
I hope the quick fix works for you and good luck!!!

Nov 27, 2010 | 2004 Dodge Dakota

1 Answer

Oil flow to the rocker arms -1994 dodge caravan


FIRST CHECK OIL PRESSURE IT SHOULD BE 30 - 80 PSI AT 3000 RPM.IF NOT YOUR OIL PUMP PRESSURE REGULATOR FAULTY.IF ALL IS GOOD OIL + FILTER BEEN CHANGED.POSSIBLE CAUSE TO NO OIL FLOW TO THE ROCKER ARMS COULD BE PLUGGED OIL PASSAGES IN ENGINE BLOCK.SLUDGE BUILD UP IN OIL PAN CAUSING POOR OIL PICK UP.OR WORN DIRTY LIFTERS WONT PUMP OIL.

Jul 20, 2010 | 1994 Dodge Caravan

2 Answers

I have a 1999 Tahoe 4x4. The oil pressure is


if your saying you suspect sludge then you may have an oil passage clogged. Trying to use cleaners can actually worsen the condition if the passage was partially clogged and you broke a piece of the sludge off. Not serviceing the oil enough is the cause of the sludge if its got to that point.

Nov 16, 2009 | Chevrolet Tahoe Cars & Trucks

1 Answer

1990 GMC Sierra lifters knocking. Oil pressure


I doubt it....It could be a totally worn out engine.

Nov 13, 2009 | 1990 GMC Sierra

3 Answers

Oil lights keeps coming on in 2005 dodge magnum


how do i turn the oil light off in my 2005 dodge magnum?

Oct 08, 2009 | 2005 Dodge Magnum

3 Answers

Knock or tapping at idle


Firstly, check your engine oil level. If the level is low, the rocker arms in the cylinder heads can tap tap tap... This may be why you're getting an engine light. Check the oil pressure gauge for a reading. If the oil pressure and level is ok, you can run an oil cleaning agent thru your motor with the oil and then do an oil change. Sometimes you can quiet a noisy motor that way.
You could also use a high-mile oil in the motor and see how that works. You can also add an oil additive to help quiet older motors..
hope this helps you.
K

Aug 28, 2009 | 1993 Mazda RX-7

5 Answers

Losing Oil Pressure in Dodge Ram


I have a 1999 dodge ram with a 5.9liter. Come to a stop and bam no pressure. Replaced sending unit twice. First after market, then mopar. Problem is still there. Replaced pump. Problem was still there. So I talked to tons of dodge mechanics, and this is the real problem. Who ever said that these engines are none for sludge is just reall really stupid. BOTTOM LINE ON THAT FACT. Sludge comes from neglect...
Dodges oil pump makes 8-10 Psi at idle. Always mechanically test that no MATTER what. But the sending unit needs 12-14 psi to read it. So what happens is the engine warms up, and the oil thins. Then you come to a stop, and rpms are low, and your not producing enough psi for the sending unit to read it. So your truck is fine. But if the chime is getting to you. Install a high volume pump. I returned the stock one, and got the high volume pump. I will bet if you change your oil every 3,000 miles you will not see sludge at all. If your dodge has high miles replace valve cover gaskets, becauce the high volume pump may cause the gaskets to leak. Whoever said ther none for sludge just has no love for a dodge, or is a moron mechanic that is stuck in his ways. High volume pump is the fix $85.00 plus pan gasket. If you have a 4x4 you can do it yourself. Drop the starter. Remove torque converter cover. With a 13mm socket with a variety of extentions, and removing a dozen bolts. Do it yourselfer will complete it in 4 hours....

Mar 04, 2009 | 1999 Dodge Ram

Not finding what you are looking for?
1999 Dodge Ram Logo

530 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...