Question about Chevrolet Blazer

1 Answer

Remote rear glass release stopped working, makes a noise like the mechanism is working but not releasing window. cant find a way to get at the mechanism to see if somethings jumped the track. cant release rear gate with window not released.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 2 Answers

If you don't have a key for the back you are going to have to climb inside to the back and pull the plastic back just enough to where you can get a screwdriver on the release rod. Push down on the rod and it will release...As for the power release not working put oil on the entire latch, and check your release cable inside the tail gate it might be stretched.

Posted on Apr 21, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can open my trunk doesn't work with remote or from inside of glove compartment thanks 2005 ssr chevorlet


Rear Compartment Lid
The rear compartment lid can be opened by operating the rear compartment lid release switch, located on the instrument panel, or by using the manual release located on the rear compartment lid. Battery voltage is supplied to the rear compartment lid release relay through the Main Power fuse. The roof and door module (RDM) receives the rear compartment lid release request via the rear compartment lid release switch signal circuit. The RDM grounds the rear compartment lid release relay coil when a release input is received through the instrument panel (I/P) switch. Grounding the coil causes the rear compartment lid release relay to energize, providing power to the rear compartment lid latch assembly through the rear compartment lid release actuator supply voltage circuit.
As an alternate method of operating the rear compartment, an emergency release handle is accessible from within the rear compartment. When the handle is slightly pulled, it will provide a ground for the bed cover release relay which will cause the actuator to operate and open the rear compartment lid. If the handle is pulled further, it will mechanically open the lid, so even if the battery is discharged or there is an electrical concern, the emergency release handle will mechanically open the lid.

As an alternate method of operating the rear compartment, an emergency release handle is accessible from within the rear compartment.

Jan 01, 2017 | Cars & Trucks

1 Answer

How do I get my rear hatch door open,when you can't open it from the outside?


You can get it open in two ways: By using your key fob and remotely opening latch or by pulling inside panel on rear hatch and manually pulling lever to get latch to release. Most times when you cant get rear hatch to open normally is because cable from outside release handle to latch broke. Have cable and release mechanism inspected and replace worn or broken parts as needed.

Feb 07, 2016 | 2003 Ford Expedition

1 Answer

Rear door locks but the glass section will not latch


I have the same problem. Try pressing the rear hatch opener button on your remote. Just press it once. Try shutting the glass section after that. For mine, it's caused when you open the rear door without first pressing the release button on the remote. Now I make sure I press the button to open it first.

Dec 14, 2013 | 2005 Jeep Liberty

2 Answers

Trunk will not release with key remote but i hear click noise from fuse block on passenger side dash i have no manual so i dont know what fuse operates what also never have found any other trunck release...


If the actuator mechanism is functioning (you hear the click) the next step is to see if the cable is connected to the latch. Open your trunk and press the button - watch what happens. You may have to manually 'lock' the trunk with the trunk lid open to observe the action. You can always unlock this latch with your key if necessary.

Let me know what happens ... good luck

Thanks for using FixYa.cop

Mar 02, 2011 | 1999 Buick Century

2 Answers

2006 Pontiac Torrent Rear Hatch won't open. No noise coming from rear gate when remote is pushed. Could a fuse be bad?


More than likely it is a fuse. Or the remote needs to be program. I would start by testing the fuses because sometimes they look good but they are not. If all the fuses are in good condition, take the car a dealer and have the remote reprogrammed.

Mar 01, 2011 | Pontiac Torrent Cars & Trucks

1 Answer

I cant open the real tailgate door on my 95 odyssey, The locking button goes up and down OK, but when I pull on outside handle, nothing happens. I did just have the rear window,which had broken,...


Try shaking the door real hard and work the latch. You may be able to shatter the glass if its the cause of it sticking. Try the key and the fob to actuate it and if you have a trunk switch up front work it also.

Jul 15, 2009 | 1995 Honda Odyssey

2 Answers

I own a 1995 mercedes SL500 and recently started having trouble with the left front door window. While stopped in a construction zone, I rolled both windows down. After leaving the construction area, I...


The window position is monitered by the softop control module. It sounds like the glass is very dirty and drawing too much amperage during window operation. The soft top is electro hydraulic. The roll bar is operated normally with hydraulics but it is mechanically released in an emergency situation. 1st make sure your windows are clean and the express(one touch operation) is working-the soft top will not function properly if the windows are not synchronized. Next be sure your roll bar works-hold swith in up position to lock roll bar rams in if they have been deployed. next put your top all the way up. untill windows roll up and try it with the engine running and trans in nuetral- if it still does not work mechanically secre rear of top with tool provided in your tool kit the owner's manual will tell you how to do this. good luck

Jun 19, 2009 | 1995 Mercedes-Benz SL-Class

1 Answer

2002 Explorer rear liftage latch replacement


Liftgate Latch Remote Control Removal and Installation
  1. Remove the liftgate trim panel. For additional information, refer to Section 501-05.
  1. Remove the watershield.
  1. Disconnect the actuator electrical connectors.
    a0023946.gif
  1. Disconnect the liftgate window glass latch release cable.
    1. Release the cable conduit.
    1. Disconnect the cable.
    a0023921.gif
  1. Disconnect the liftgate latch release cable.
    1. Remove the cable conduit.
    1. Disconnect the cable.
    a0023919.gif
  1. Release the exterior liftgate release handle actuating rod.
    1. Open the clip.
    1. Release the rod.
    a0023942.gif
  1. Remove the bolts and the liftgate latch remote control.
    a0023922.gif
  1. To install, reverse the removal procedure.
    • Transfer parts as necessary.

Jun 01, 2009 | 2002 Ford Explorer

1 Answer

2001 Ford Escape Rear Hatch won't unlock


The liftgate consists of the following components:
  • liftgate door lock actuator
  • liftgate lock cylinder (if equipped)
  • liftgate window glass
  • liftgate window latch/ajar switch
  • liftgate window glass release handle
  • liftgate latch remote control which consists of the following component:
    • liftgate release handle
  • liftgate latch, which consist of the following component:
    • liftgate latch door ajar switch
Liftgate Latch Actuator Removal and Installation
  1. Remove the liftgate latch remote control. For additional information, refer to Liftgate Latch Remote Control in this section.
SECTION 501-14: Handles, Locks, Latches and Entry Systems 2001 Escape Workshop Manual
REMOVAL AND INSTALLATION Liftgate Latch Removal and Installation
  1. Remove the liftgate trim panel.
  1. Disconnect the liftgate ajar switch electrical connector.
  1. Disconnect the liftgate latch actuating rod.
    1. Open the clip.
    1. Disconnect the actuating rod.
  1. Remove and discard the liftgate latch bolts.
  1. Remove the liftgate latch.
  1. NOTE: Make sure the liftgate latch release rod is not preloading the latch. It should be clipped in a relaxed state with no slack.
    NOTE: Position the liftgate latch release rod by pushing outboard to remove the slack.
  1. Remove the screws and the liftgate latch actuator
90f640f.gif

May 29, 2009 | 2001 Ford Escape

1 Answer

Rear Window Glass won't Release


Followed owners manual for emergency opening of rear window glass.
Removed upholstery panel from the tailgate once glass was opened. Found a broke (plastic) actuator arm on the actuating motor.
Ordered new one for replacement.

Feb 04, 2009 | 1996 Chevrolet Blazer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

118 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...