Question about 2000 Daewoo Lanos

2 Answers

Head bolt torque settings

Need head bolt torque settings for daewoo lanos

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Is that for the 1.5 lt engine

Posted on Dec 11, 2011

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 243 Answers

Hi there,
The tightening torque for your bolts are:
25Nm - 60deg - 60deg - 60deg - 10deg.
Make sure you get the sequence right first time. If you are not sure loosen the head back and restart.
Cheers

Posted on Apr 19, 2009

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

johnny5846
  • 379 Answers

SOURCE: 2000 daewoo lanos head torque

the 2000 daewoo lanos 1.6L dohc head torque is as follows , step 1 = 18 ft. lbs. , step 2 = 70 degrees , step 3 = 70 degrees , step 4 = 30 degrees . sequence is as pictured .

58bb502.jpg

there ya go , gears to the left , looking at the front of engine .

Posted on Jan 09, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the big end torque settings on a daewoo lanos 1600


Connecting Rod Bearing Cap Bolts
25 + 30 degrees+ 15 degrees big end
18 + 30 degrees+ 15 degrees little end

Aug 05, 2014 | 2000 Daewoo Lanos

2 Answers

2001 daewoo lanos dual overhead 1.6 liter head bolt torque and sequence


  1. Tighten cylinder head bolts to 25 N.m (18 ft. lbs.). Tighten bolts an additional 70 degrees plus 70 degrees plus 30 degrees using angular torque gauge .
2001-daewoo-lanos-dual-overhead-1-6-vrq3bch1e30nz1jlq5sn5nnt-4-0.gif

Oct 20, 2011 | 2000 Daewoo Lanos

1 Answer

I need head bolt torque specs


Hello, you will start from middle head bolts and work out to end bolts. Use a crisscross pattern. Set all bolts at 20 ft pounds then repeat to a final setting of 51 -54 ft pounds. Just be sure you do an "x" patern from middle bolts working out. Also be sure you coat th threads of each headbolt with some oil so they torque smooth and accurate.

Apr 04, 2011 | 1999 Daewoo Lanos

1 Answer

Hi I need the torque settings for my daewoo lanos's headbolts Belinda


any head bolts should be tourqed to 96 ib's plus a quarter turn

Oct 04, 2010 | Daewoo Lanos Cars & Trucks

1 Answer

Do you know the torque settings for the cylinder head bolts on a w reg daewoo matiz


Tighten the cylinder head bolts to 85--90 NSm (63--66lb-ft).

moz-screenshot-4.jpg1eec8d8.jpg
moz-screenshot-2.jpgmoz-screenshot-3.jpg

Nov 17, 2009 | 1999 Daewoo Lanos

1 Answer

Cylinder head daewoo matiz


Tighten the cylinder head bolts to 85--90 NSm (63--66lb-ft).

29d7267.jpg

Jun 06, 2009 | 1999 Daewoo Lanos

1 Answer

The torque, does it have to be real tight or lose?


torque is a means of measurement. for example if your service manual says to torque the head bolts to 75 ft. lbs. that means you need to use a torque wrench and set it to 75 ft lbs. sometimes people will say to crank down or to torque down a nut / bolt that is slang for tightening down the nut / bolt very tight. it all depends on the application.when in doubt, check your service manual.

Apr 19, 2009 | 2000 Daewoo Lanos

2 Answers

2000 daewoo lanos head torque


the 2000 daewoo lanos 1.6L dohc head torque is as follows , step 1 = 18 ft. lbs. , step 2 = 70 degrees , step 3 = 70 degrees , step 4 = 30 degrees . sequence is as pictured .

58bb502.jpg

there ya go , gears to the left , looking at the front of engine .

Jan 09, 2009 | 2000 Daewoo Lanos

1 Answer

Head screws


2001 Daewoo Lanos Cylinder Head Bolt Torque Specs
Torque bolts in sequence
(looking down on the engine from front of car)

belts 1 3 9 5 7 trans
belts 2 4 10 6 8 trans

Step 1: 18 ft.lbs. (25 Nm)
Step 2: Plus 60 degrees
Step 3: Plus 60 degrees
Step 4: Plus 60 degrees
Step 5: Plus 10 degrees

Sep 22, 2008 | 2001 Daewoo Lanos

Not finding what you are looking for?
2000 Daewoo Lanos Logo

Related Topics:

660 people viewed this question

Ask a Question

Usually answered in minutes!

Top Daewoo Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

76109 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Are you a Daewoo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...