Question about 2000 Chevrolet S-10

1 Answer

Clutch when i press my clutch in and out it does not engage and it works freely its like theres nothing there. ive tried to bleed the slavecyinder that didnt work its a 1999 chevy s10 2.2

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 62 Answers

You will have to remove the transmission and replace your clutch.

The throw out bearing has failed and needs to be replaced, along with your pressure plate and friction disk.

If you need further assistance let me know.

Posted on Apr 19, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My clutch will not engage.


First make sure that the problem is the clutch not engaging instead of not releasing The slave cylinder only releases the clutch Put the car in any gear and try to move it if it won't roll easily the clutch is engaged If this is the case you probably need to bleed the air out of the line between the clutch master and slave cylinders

Apr 18, 2016 | GMC Sierra 1500 Cars & Trucks

1 Answer

What is best way to bleed slave cyl


please go to www.automecanico.com and translate this website with your browser this amazing sites. and fix it.

God bless you

Jul 08, 2013 | 1991 Chevrolet S-10

1 Answer

97 jeep Cherokee clutch will not depress to start the engine


Now you need to bleed the clutch at the clutch slave cylinder down on the transmission to restore the clutch.
Put a wrench on the bleed valve and open it, then lightly close it. Now have someone pump the clutch a couple of times to build pressure. Then while the clutch pedal is slowly pressed down open the bleed valve, then close valve as pedal gets to floor. Repeat this bleed process until a steady stream of brake fluid comes out the bleed valve. Then you should have a good clutch again.

Dec 20, 2012 | 1997 Jeep Cherokee

1 Answer

Wont go into gear


Did any fluid come out? It has to have fluid reach the slave cylinder, and when bleed valve is open and clutch is pressed, fluid should squirt out. Open the valve and pump the clutch until fluid is forced down into the slave cylinder. Keep topping up the clutch master cylinder so it won't run dry.
Post back if still having problems. There is a tool at auto parts stores for pressure bleeding brake lines and clutch lines. It forces fluid into the lines by pressure. If nothing works, your clutch master cylinder may have failed. Take the line off at the slave cylinder and see if the master cylinder is working to push fluid through the line.

May 10, 2012 | Hyundai Motor 1997 Tiburon

2 Answers

New performance clutch, new slave cylinder and master slave wont go in gear, and when in gear and pressing clutch vehicle wants to go


You may not have got all of the air out of the clutch line Try bleeding it again. The sequence is as follows:
1. Start with the Master Cylinder full of fluid. (Don’t forget to check after a few bleeds that it stays above ¼ full so that you don’t introduce more air into the line).
2. Have an assistant pump the clutch pedal 2 or 3 times, then hold down.
3. Loosen bleed nipple to release any air & fluid.
4. Tighten nipple. Assistant then lets clutch pedal return. It may be necessary to manually pull back pedal if it does not return by itself.
5. Wait a few seconds then repeat the sequence from #2.
Bleeding is complete when no more air bubbles are visible in the fluid released from the bleed nipple. It also helps if you have a length of clear plastic tubing that fits securely over the bleed nipple which makes it easier to see if there are any air bubbles.

Aug 20, 2010 | 1995 Eagle Talon

1 Answer

I press on the clutch there is no tension me and my brother in law bleeded it by pumping clutch open the bolt air came out closed it that worked for about two days then it started all over i have to speed...


First of all you do not bleed a clutch if it has a concentric (hydraulic) bearing inside the gearbox by pumping it, just open the bolt for the air to come out, no need of pressing, after few minutes you should see the fluid coming slowly (make sure your expansion tank is full), once it comes slowly tight the air bolt, press the clutch once or twice and repeat the whole process until the clutch pedal is hard. Should be fine from than.

Aug 03, 2010 | 2004 Suzuki Forenza

2 Answers

When you press down the clutch nothing happens


The master,or slave cylinder ,are bad.

May 25, 2010 | 1990 Toyota Pickup

2 Answers

Clutch is moving freely, no resistance


The command for the clutch is broken. Depending on your engine and country either it will be a cable or hydraulic failure.

Jan 20, 2010 | 2000 Volkswagen Golf

1 Answer

Clutch goes to floor will not engage


Bleeding won't fix it,If it can be put in gear and car doesn't move your clutch is no good.

May 28, 2009 | 1994 Dodge Stealth

2 Answers

Changed clutch master cyl. and clutch still goes to floor


try to gravity bleed the system..............leave the master cap off and open the bleeder screw....sometimes this can take a while.epically if you don't bench bleed the new master.(some clutch masters Ive seen (ford especially) take a lot of pumping literally hundreds of pumps)
hope this helps.Good luck!

Dec 21, 2008 | 1992 Ford Escort 4 Door

Not finding what you are looking for?
2000 Chevrolet S-10 Logo

184 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8266 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...