Question about 1995 Chevrolet Lumina

1 Answer

Steering Noise after changing pump

I changed my powersteering pump in my 1995 Chevy Lumina. I put fluid in the pump and put everything back together, but when I start the engin and turn the wheel, it makes a loud (grinding type noise). What can I or do I need to do next? Thank you in advance, Scott

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 6,674 Answers

Top up fluid & turn wheels all the way one way & then the other, until all air is bled out. May need to do it a few times.

Posted on Apr 19, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Whining noise when turning steering wheel


Eather your powersteering fluid is low or your belts are loose or you pump is goipn bad

Mar 05, 2013 | 1999 Chevrolet Lumina

1 Answer

Where do you put in the powersteering fluid?


should have a cap on the power steering pump with a little dipstick on it you pour the fluid in the hole you check the power steering levels its a pretty good sized cap and says powersteering or its a little dipstick then you just pour the fluid thru the dipstick housing.

Oct 31, 2010 | 1999 Chevrolet Lumina

1 Answer

I have a honda accord 1993. I had a leaking power steering pressure line and a bad rack and pinion that I just replaced, but now I have a howling sound when i'm driving the vehicle. it makes the sound...


Is the fluid low?

Did you replace it with an aftermarket pump?

Aftermarket pumps are notorious for making noise. Your nest bet is to get a good used part or get one from the dealer.

If there is a lot of foam in the fluid it will cause the same noise also. You can add an ounce of seafoam motor tune (available at any good parts store) to the power steering fluid. This will help reduce the faoming fluid.

The last thing I can think of is did you use Honda powersteering fluid? If not your going to want to flush the powersteering system ASAP so you don't ruin the parts you just replaced.

Oct 13, 2010 | 1993 Honda Accord

2 Answers

Can't find where to put powersteering fluid


It will be a belt driven pump. Some are buried behind cylinder head on passenger side, by firewall.

Oct 09, 2010 | 1995 Buick Regal

2 Answers

Brought my audi a4 in to have the timing belt and water pump replaced and my car is now leaking power steering fluid and making loud noise, i was told when i took it back that the the powersteering fluid...


they may have loosened the power steering pump to take off the belt and not put it back right. They may have overtightened the belt which has worn the bearings out on the steering pump and made it start leaking from the bearings...

Jan 24, 2010 | 2004 Audi A4

1 Answer

I changed powersteering cooler on a 2000 f250. lost alot of the fluid. it seems like air got in the abs system. The abs light is on and when you push on the pedal, you can here the powersteering making...


Hello hummelsautob.
Changing the power steering cooler can't allow air into the brake system. Two different fluid systems.
Your F250 has it's brake assist powered by the power steering pump.
Instead of using a vacuum assist it uses the hydraulic power from the pump.
When refilling your pump you have gotten air mixed in with the fluid. This turns it into a consistency something like whipped cream.
When in this state it isn't effective. Let it sit for a couple hours and let the air bubble out of the fluid. Recheck your level after this as it will drop.
This will make your brakes feel normal again.
Just a note on adding fluid to an empty power steering pump.
Add fluid to the reservoir but not to the top, turn the steering wheel back and forth slowly with the engine off. This will keep the fluid from foaming.

Dec 15, 2009 | 1997 Ford F150 Regular Cab

1 Answer

Powersteering


typically no one changes power steering fluid but if you insist you will need an evacuation pump or some kind of suction pump and just **** the reservoir dry and then refill with new oil

Apr 21, 2009 | 1995 Mazda 626

1 Answer

Sounds like a hamster in a wheel


After about 3 - 4 years, a powersteering pump accumulates a lot of metal specs, once they start building up, your pump starts choking, and wont be able to let the fluid flow through and basically fry itself. My advice, have a shop, drain and flush your power steering pump / fluid. You can even do it yourself, but it requires 2 people; Lift front end up, on jacks followed by stands, unhook the powersteering pump line, turn car on, and have your friend, mom, father w.e turn the wheel from left to right, let the old fluid drain out, one old fluid is out, pour NEW powersteering fluid into the pump, you will need to let it flow through, so it flushes itself out. Remember to put a large pan underneath where the pump is so you dont get fluid everywhere, be prepared to buy at least 3 - 4 bottles of fluid. Let 2 bottles run through, then put the pump line back on and fill 'er up.

Then your done, drive and see.

Mar 31, 2009 | 2002 Oldsmobile Alero

1 Answer

Loss of PS fluid, Slipping Transmission, Loss of Tranie fluid


the whine is from the power steering pump...you probably have a split line that needs replaced..

Jan 04, 2009 | 1995 Ford Windstar

Not finding what you are looking for?
1995 Chevrolet Lumina Logo

145 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...