Question about 2000 Jeep Grand Cherokee

2 Answers

2000 grand cherokee #7 Cylinder not fireing

I have a 2000 jeep grand cherokee the engine was running verry ruff
my father in law replaced a bunch of sensors
now it wont run at all just turns over
was told by a delership that the number 7 cylinder was not fireing
have no clue wat would cause that if any buddy can help me
please email me joesauto85@aol.com thank u verry much....

Posted by on

  • yadayada
    yadayada May 11, 2010

    is the fuel injector ok? what is the compression?

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Along the fuel rail there is a number of plug ins make sure all of them are plugged in

Posted on Apr 30, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 5,158 Answers

Replace the coil pack... to confirm this pull spark plug leads off the coil pack one at a time.... note whether the idle changes. the spark will actually arc and you can hear it. if one of the plugs does not have this arcing... the coil pack is at fault.

Please take a moment to rate this solution.. thanks

Posted on Apr 19, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

2000 Jeep Grand Cherokee Laredo 4.7 liter code reads p0307 turn the car off when I turn it back on started misfiring and sputtering and wont stay started now help


code p 0307 is misfiring on no 7 cylinder ====causes --- engine mechanical fault ---wiring---ignition/ fuel system--injector --ECT/MAF sensor---ECM
look for low fuel pressure or ignition control module

May 31, 2016 | 2000 Jeep Grand Cherokee Laredo

2 Answers

Jeep 4.0 firing order


1999 Jeep Cherokee 4WD 4.0 liter L6 VIN "S"

71cf96f.gif

Hope this helps (remember rated this).

Aug 09, 2010 | 1998 Jeep Cherokee

1 Answer

Need firing order for 1998 Jeep Cherokee gand


For the 1998 Jeep Grand Cherokee Laredo:
I do not know if you have the 4.0L In-Line 6-Cylinder, the 5.2L V8, or the 5.9L V8; however I have included ALL below:

For the 4.0L In-Line 6-Cylinder:
Firing Order:
1-5-3-6-2-4
Cylinders:
(back)
...6
...5
...4
...3
...2
...1
(front)

Distributor:
....(back)
.....5....3..(+)-screw
1.............6
(+).4....2

For the 5.2L V8: AND 5.9L V8:
Firing Order:
1-8-4-3-6-5-7-2
Cylinders:
.......(back).......
|..8..|.........|..7..|
|..6..|.........|..5..|
|..4..|.........|..3..|
|..2..|.........|..1..|
.......(front)
Distributor:
.....(back)
.......3
..4.........6

8.............5
..1.........7
.......2
......(front)

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

May 28, 2010 | 1998 Jeep Grand Cherokee

1 Answer

I need to know the firing order of my 1995 limited jeep grand cherokeemy spark plug wires are missing i have new wires i just don't know the firing order


For the 1995 Jeep Grand Cherokee:
I do not know if you have the 4.0L In-Line (Straight) 6-Cylinder or the 5.2L V8; however I have included bothe below.

For the 4.0L In-Line 6-Cylinder:
Firing Order:
1-5-3-6-2-4
Cylinders:
(back)
|..6..|
|..5..|
|..4..|
|..3..|
|..2..|
|..1..|
(front)
Distributor:
...(back)
....5...3.(+)-screw
1...........6
(+)4...2
...(front)

For the 5.2L V8:
Firing Order:
1-8-4-3-6-5-7-2
Cylinders:
.......(back)......
|..8..|........|..7..|
|..6..|........|..5..|
|..4..|........|..3..|
|..2..|........|..1..|
.......(front)
Distributor:
.......(back)
.........3
...4.........6
8...............5
...1.........7
.........2
.......(front)

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

May 21, 2010 | 1995 Jeep Grand Cherokee

1 Answer

I need the firing order for a 1994 Jeep Grand Cherokee Straight 6 engine


For 1994 Jeep Grand Cherokee:
2WD and 4WD have the same
4.0L In-Line 6-Cylinder:
Firing Order:

1-5-3-6-2-4
Cylinders:
(back)
...6
...5
...4
...3
...2
...1
(front)

Distributor:
....(back)
.....5....3..(+)-screw
1.............6
(+).4....2

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

May 20, 2010 | 1994 Jeep Grand Cherokee

1 Answer

What is the firing order on the distributor cap on my 1997 Grand Cherokee


For the 1997 Jeep Grand Cherokee:
I do not know if you have the 4.0L In-Line 6-Cylinder or the 5.2L V8, however I have included both below:

For the 4.0L In-Line 6-Cylinder:
Firing Order:
1-5-3-6-2-4
Cylinders:
(back)
...6
...5
...4
...3
...2
...1
(front)

Distributor:
....(back)
.....5....3..(+)-screw
1.............6
(+).4....2

For the 5.2L V8: (Side Note 5.9L V8 = Same)
Firing Order:
1-8-4-3-6-5-7-2
Cylinders:
.......(back).......
|..8..|.........|..7..|
|..6..|.........|..5..|
|..4..|.........|..3..|
|..2..|.........|..1..|
.......(front)
Distributor:
.....(back)
.........3
....4........6..(+)-rounded tab screw
8................5
[ ].1.........7
.........2
......(front)

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!



Apr 18, 2010 | 1997 Jeep Grand Cherokee

2 Answers

98 grand cherokee cyliner 1 misfire,, HELP ..


remove valve cover and check valve movement

if all valves have full motion then you have a bad set of rings

Jan 03, 2010 | 1998 Jeep Grand Cherokee

1 Answer

What is the firing order of a 2005 jeep grand cherokee


I wrote all engine spec for a 2005 jeep grand cherokee

3.7L 6 cylinder
1-6-5-4-3-2

4.7L 8 Cylinder
1-8-4-3-6-5-7-2

5.7L 8 Cylinder
1-8-4-3-6-5-7-2

let me know if this help you.....

Sep 30, 2009 | 2000 Jeep Grand Cherokee

Not finding what you are looking for?
2000 Jeep Grand Cherokee Logo

209 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...