Question about Suzuki Vitara

1 Answer

Do you have to remove the crankshaft pulley to replace the timing belt on a 1993 vitara 1600cc

Posted by on

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,418 Answers

Yes.

Posted on Apr 19, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1993 SUBARU LEGACY CRANKSHAFT PULLEY IS OF BEFORE FINDING TOP DEAD CENTER WHAT MUST I DO TO PROPERLY INSTALL THE CRANKSHAFT PULLEY IN RIGHT POSITION AND DOES THIS PULLEY GET A KEY STOCK INTO THE SLO


If you mean your fan belt or drive pulley broke and you want to replace it, there is no timing position unless there is a Woodruff Key for the pulley and that is straight forward.

Aug 14, 2017 | Subaru GL Cars & Trucks

1 Answer

Como poner la banda de tienpo de un toyota camery


Installation
1.Install No. 2 idler pulley (if removed). Install and tighten bolt to specification. See TORQUE SPECIFICATIONS . Ensure idler pulley is clean and rotates smoothly. 2.Install No. 1 idler pulley and tension spring (if removed). Pry No. 1 idler pulley away from timing belt area as far as possible. Temporarily tighten No. 1 idler pulley bolt. Ensure idler pulley is clean and rotates smoothly. 3.Using crankshaft pulley bolt, rotate crankshaft so timing mark on crankshaft sprocket aligns with timing mark on oil pump housing. See. This will position keyway in crankshaft sprocket at 12 o'clock position.

CAUTION:If reusing timing belt, ensure reference marks on timing belt align with reference marks placed on crankshaft and camshaft sprockets. Ensure timing belt is installed in original direction of rotation.
4.Ensure all sprockets and idler pulleys are clean. Install timing belt on crankshaft sprocket, oil pump sprocket, No. 1 idler pulley, and then No. 2 idler pulley in sequence. 5.Install timing belt guide with cupped side away from crankshaft sprocket and flat side toward timing belt. Install No. 1 timing belt cover and new gasket. 6.Align crankshaft pulley key groove with key in crankshaft. Install crankshaft pulley. Install and tighten crankshaft pulley bolt to specification. 7.Rotate crankshaft clockwise so cylinder No. 1 is at TDC on compression stroke. Ensure timing mark on crankshaft pulley aligns with "0" mark on No. 1 timing belt cover. If reusing timing belt, ensure reference mark on timing belt aligns with upper edge of No. 1 timing belt cover. 8.Rotate camshaft, and align hole in camshaft sprocket with alignment mark on camshaft bearing cap. See Fig. 2 . Install timing belt on camshaft sprocket. If reusing timing belt, ensure reference mark on timing belt aligns with the reference mark on camshaft sprocket. Ensure tension exists on timing belt between the crankshaft and camshaft sprockets.
CAUTION:DO NOT rotate crankshaft counterclockwise, as viewed from timing belt end of engine.
9.Loosen No. 1 idler pulley bolt 1/2 turn. Rotate crankshaft pulley 2 full revolutions clockwise from TDC to TDC. 10.Ensure timing mark on crankshaft pulley aligns with "0" mark on No. 1 timing belt cover, and hole in camshaft sprocket aligns with alignment mark on camshaft bearing cap. See Fig. 2 . If timing marks are not aligned, remove timing belt and reinstall. 11.Rotate crankshaft clockwise 1 and 7/8 revolutions and align crankshaft pulley "0" mark with 45-degree Before Top Dead Center (BTDC) mark on No. 1 timing belt cover. See Fig. 5 . 12.Tighten No. 1 idler pulley bolt to specification. See TORQUE SPECIFICATIONS . Install No. 2 timing belt cover and gaskets. Install and tighten spark plugs to specification. 13.To install remaining components, reverse removal procedure. Install all bolts/nuts on right (timing belt side) engine mount before tightening to specification. 14.On Camry, when installing control rod and bracket on strut tower and right (timing belt side engine mount, tighten bolts to specification in sequence.

Dec 23, 2010 | 1993 Toyota Camry V6

1 Answer

How to replace timing belt on a 1992 pontiac sunbird


1989–92 VEHICLES
  1. Disconnect the negative battery cable.
  2. Remove the serpentine belt and timing belt cover.
  3. Loosen the water pump bolts and release tension with tool J–33039 or equivalent.
  4. Raise and support the vehicle safely.
  5. Remove the crankshaft pulley.
  6. Carefully lower the vehicle, then remove the timing belt. Fig. 11: Exploded view of the timing belt assembly — 1989–92 OHC engines 87953118.gif
    To install:
  7. Turn the crankshaft and the camshaft gears clockwise to align the timing marks on the gears with the timing marks on the rear cover.
  8. Install the timing belt, making sure the portion between the camshaft gear and crankcase gear is in tension.
  9. Using tool J–33039 or equivalent, turn the water pump eccentric clockwise until the tensioner contacts the high torque stop. Tighten the water pump screws slightly.
  10. Turn the engine by the crankshaft gear bolt 720°to fully seat the belt into the gear teeth.
  11. Turn the water pump eccentric counterclockwise until the hole in the tensioner arm is aligned with the hole in the base.
  12. Tighten the water pump screws to 18 ft. lbs. (24 Nm), while checking that the tensioner holes remain as adjusted in the prior step.
  13. Install the crankshaft pulley, timing belt cover and the serpentine drive belt.
1993–94 VEHICLES
  1. Disconnect the negative battery cable, then partially drain and recover the cooling system.
  2. Remove the coolant recovery reservoir.
  3. If equipped, remove the A/C belt.
  4. Remove the serpentine belt.
  5. Disconnect the evaporative emission pipe assembly.
  6. Remove the crankshaft pulley assembly.
  7. As outlined earlier, remove the timing belt front cover.
  8. Align the marks on the crankshaft sprocket with the marks on the rear timing belt cover by rotating the crankshaft.
  9. Loosen the water pump retaining bolts, and release the tension with tool J 33039-A or equivalent.
  10. Carefully lower the vehicle, then remove the timing belt. Fig. 12: Timing belt installation and tightening specifications — 1993–94 2.0L OHC engines 87953119.gif
    To install:
  11. Turn the crankshaft and camshaft gears clockwise to align the timing marks on the gears with the timing marks on the rear cover.
  12. Install the timing belt, making sure that the portion between the camshaft gear and crankshaft gear is in tension.
  13. Using tool J 33039-A, or equivalent adjustment tool, turn the coolant pump eccentric clockwise until the tensioner arm contacts the high torque stop. Tighten the water pump screws slightly.
  14. Turn the engine by the crankshaft gear bolt 720°clockwise to fully seat the belt into the gear teeth.
  15. Turn the coolant pump eccentric counter clockwise until the hole in the tensioner arm is aligned with the hole in the base. This must be done with the engine at room temperature, approximately 68°F (20°C).
  16. Tighten the water pump screws while checking that the tensioner holes remain as adjusted as in step 15.
  17. As outlined earlier, install the timing belt cover.
  18. Install the crankshaft pulley.
  19. Connect the evaporative emission pipe assembly.
  20. Install the serpentine drive belt and the A/C belt (if equipped).
  21. Install the coolant recovery reservoir.
  22. Properly fill the cooling system, then connect the negative battery cable.
prev.gif next.gif

Aug 11, 2010 | 1992 Pontiac Sunbird

1 Answer

Can you tell me where I can print instructions for free to help me change my timing belt in a 93 ford festiva


Here are the instructions for removing the timing cover, and for replacing the timing belt. If this is helpful, please click my accept button! Thanks!
Remove accessory drive belts.
  1. Remove water pump pulley to pump hub attaching bolts, then the pulley.
  2. Remove right inner fender panel to gain access to crankshaft pulley.
  3. Remove outer crankshaft pulley attaching bolts, then the outer stiffener/spacer and outer pulley
  4. Remove inner stiffener/spacer, attaching screws, inner pulley and baffle plate.
  5. Remove attaching bolts, then the upper and lower timing covers.
  6. Reverse procedure to install. When installing crankshaft pulley, ensure curved lip on baffle plate and deep recess of inner pulley face outward

8fb9fc4.gif
  1. Remove timing belt covers as outlined previously.
  2. Remove timing belt tensioner pulley attaching bolt, then the tensioner pulley, spring and spring cover
  3. If reusing old belt, mark direction of rotation on belt to aid installation.
  4. Remove timing belt from crankshaft and camshaft sprockets.
  5. Check crankshaft and camshaft sprockets, tensioner pulley and timing belt for wear or damage. Replace components as necessary.
  6. Align camshaft and crankshaft sprocket timing marks with marks on cylinder head and oil pump housing
  7. Install timing belt. If reusing old belt, ensure belt is installed so that direction of rotation mark made during removal is positioned correctly.
  8. Install spring and spring cover onto tensioner pulley, then install pulley and attaching bolt. Do not tighten bolt at this time.
  9. Install tensioner spring onto anchor, then tighten pulley attaching bolt to torque listed at the end of this section.
  10. Reinstall timing belt covers.

spacer.gif 2006-05-25_081817_fest2.thumb.gif
This photo shows timing marks.


59f76eb.gif

Jul 14, 2010 | 1993 Ford Festiva

1 Answer

Would like information on timing belt settings on a 1993 Isuzu Rodeo 4X4 3.2 We have already bought the book. It seems that the setting still are not what this particular motor/engine needs are there other...


look for timing marks????
Align groove of crankshaft timing pulley with mark on oil pump.
Align the marks on the camshaft timing pulleys with the corresponding dots on the front plate. (i can email pic if needed)
When timing marks are aligned, no pistons will be on T.D.C.
install timing belt. Align the dotted alignment mark on the timing belt with the mark on the crankshaft gear.
For correct belt installation, the letters the belt must be able to be read as viewed from the front of the vehicle. It is recommended for easy installation that the belt be secured with double clips after it is installed to each pulley. Align the alignment mark (white line) on the timing belt with the alignment mark on the RH bank camshaft timing pulley (on the left side as viewed from the front of the vehicle Secure the belt with a double clip.
Align the alignment mark (white line) on the timing belt with the alignment mark on the RH bank camshaft timing pulley (on the left side as viewed from the front of the vehicle Secure the belt with a double clip.
Turn the crankshaft counterclockwise to remove the belt slack between the crankshaft timing pulley and the RH bank camshaft timing pulley.
Install the belt on the water pump pulley. Remove double clips from pulleys. Turn the crankshaft pulley clockwise by two turns. Measure the rod protrusion to ensure it is within the standard. Standard 4-6 mm (0.16-0.24 in)


13) If out of standard, remove pusher, loosen adjusting bolt, and readjust. (Repeat from step 11). Tighten adjusting bolt to the specified torque. Torque 42 N-m (31 lb-ft)


  1. Pusher
    • Tighten bolt to the specified torque.
Torque 19 N-m (19 lb-ft)


  1. Timing belt cover
    • Remove crankshaft pulley that was installed in step 9.
    • Tighten bolts to the specified torque.
Torque 17 N-m (12 lb-ft)


  1. Oil cooler hose
    • Tighten oil cooler hose bracket bolts to the specified torque.
Torque 22 N-m (16 lb-ft)


  1. Crankshaft pulley assembly
    • Using special tool J-8614-01, hold the crankshaft pulley.
    • Tighten center bolt to the specified torque.
Torque 167 N-m (123 lb-ft)


  1. Crankshaft pulley; P/S belt
    • Tighten fixing bolt to the specified torque.
Install the belt on the idler pulley.

Mar 07, 2010 | 1993 Isuzu Rodeo

2 Answers

Need to know how to set the timing gears for a geo storm 1991 1.6litre had to replace timing belt


GM Storm/Spectrum 1985-1993 Repair Guide


Timing Belt - REMOVAL & INSTALLATION

Although timing belts may last for thousands of miles past the recommended replacement interval, they should be replaced every 60,000 miles to prevent trouble or damage should they snap. Timing belts do not usually give an indication that they are worn or aging without removing the cover(s) and inspecting the belt. A worn or damaged belt could give out at any time. In some cases, should a timing belt snap while the engine is running, damage could be done to the valve trains or pistons requiring a partial or full engine disassembly. Also, should the belt go when the vehicle is far from home, a costly tow or even more costly repair job and considerable inconvenience may be suffered.
Timing belts must always be handled carefully and kept completely free of dirt, grease, fluids and lubricants. This includes any accidental contact from spillage, fingerprints, rags, etc.. These same precautions apply to the pulleys and contact surfaces on which the belt rides.The belt must never be crimped, twisted or bent. Never use tools to pry or wedge the belt into place. Such actions will damage the structure of the belt and possibly cause breakage.


Spectrum
(see Figures 1, 2 and 3)
The engine must be removed from the vehicle for this procedure to be performed.
  1. Remove the engine and mount it to an engine stand.
  2. Remove the accessory drive belts.
  3. Remove the engine mounting bracket from the timing cover.
  4. Rotate the crankshaft until the notch on the crankshaft pulley aligns with the 0 degree mark on the timing cover and the No. 4 cylinder is on TDC of the compression stroke.
  5. Remove the starter and install the flywheel holding tool No. J-35271 or equivalent.
  6. Remove the crankshaft bolt, boss and pulley.
  7. Remove the timing cover bolts and the timing cover.
  8. Loosen the tension pulley bolt.
  9. Insert an Allen wrench into the tension pulley hexagonal hole and loosen the timing belt by turning the tension pulley clockwise.
  10. Remove the timing belt.
  11. Remove the head cover.
Inspect the timing belt for signs of cracking, abnormal wear and hardening. Never expose the belt to oil, sunlight or heat. Avoid excessive bending, twisting or stretching.
To install:
  1. Position the Woodruff key in the crankshaft followed by the crankshaft timing gear. Align the groove on the timing gear with the mark on the oil pump.
  2. Align the camshaft timing gear mark with the upper surface of the cylinder head and the dowel pin in its uppermost position.
  3. Place the timing belt arrow in the direction of the engine rotation and install the timing belt, first to the crankshaft pulley, next to the camshaft pulley, then to the water pump pulley and finally to the tension pulley. Tighten the tension pulley bolt.
Once installed, there must be not slack in the timing belt. The belt teeth must be in perfect alignment with the gears.
  1. Turn the crankshaft 2 complete revolutions and realign the crankshaft timing gear groove with the mark on the oil pump.
  2. Loosen the tension pulley bolt and apply tension to the belt using an Allen wrench in the hexagonal pulley hole. Torque the pulley bolt to 37 ft. lbs. (50 Nm) while holding the pulley stationary.
  3. Check the timing belt tension using a belt tension gauge, it should be 40-48 lbs. (18-22 Kg).
  4. Adjust the valve clearances.
  5. To complete the installation, reverse the removal procedures. Torque the crankshaft pulley-to-crankshaft bolt to 108 ft. lbs. (147 Nm).
2befeb0.jpg

Fig. 1: Timing belt routing - SOHC engines

716bbfc.jpg
Fig. 2: Align the crankshaft timing gear keyway with the mark in the oil pump - SOHC engines

2f82d49.jpg
Fig. 3: Check the timing belt tension at the center of the longest point between pulleys - SOHC engines


Storm - SOHC ENGINE
(see Figures 1, 2 and 3)
  1. Disconnect the battery negative cable.
  2. Remove the timing belt cover. If necessary, raise and support the vehicle, then remove the right under cover to access the lower timing cover bolts.
  3. If not done already, rotate the crankshaft so that the No. 4 cylinder is at TDC on its compression stroke by aligning the camshaft pulley timing mark to the 9 o'clock position.
  4. Raise and support the vehicle safely.
  5. Remove the crankshaft pulley center bolt, the 4 crankshaft pulley side bolts and the crankshaft pulley from the vehicle.
  6. Loosen the belt tension pulley bolt, then remove the timing belt from around the tensioner and other pulleys. Remove the timing belt from the vehicle.
To install:
  1. Make sure the crankshaft pulley keyway and groove is aligned with the oil pump timing mark and the camshaft pulley timing mark is in the 9 o'clock position. Install the timing belt around the crankshaft timing pulley, followed by the tensioner pulley, water pump pulley and the camshaft timing pulley.
  2. Tighten the belt tensioner retaining bolt. Make sure that the belt is properly tightened and is aligned evenly around all the pulleys:
    1. Turn the crankshaft 2 complete revolutions and realign the crankshaft timing gear groove with the mark on the oil pump.
    2. Loosen the tension pulley bolt and apply tension to the belt using an Allen wrench in the hexagonal pulley hole. Torque the pulley bolt to 37 ft. lbs. (50 Nm) while holding the pulley stationary.
    3. Check the timing belt tension/deflection using a belt tension gauge. The belt should deflect 0.63-0.79 in. (16-20mm) when 22 lbs. (98 N) of pressure is applied to the center of the longest belt stretch.
  3. Check that the camshaft is still aligned to the 9 o'clock position.
  4. Install the timing belt cover, secure it with the 2 lower mounting bolts, then torque the bolts to 89 in. lbs. (10 Nm).
  5. Install the crankshaft pulley to the crankshaft dampener, secure the center bolt and the 4 side bolts. Torque the center bolt to 87 ft. lbs. (118 Nm) and the 4 side bolts to 17 ft. lbs. (23 Nm).
  6. If removed, install the right side under cover.
  7. Lower the vehicle. Install the 4 upper timing belt cover retaining bolts and tighten to 89 inch lbs. (10 Nm).
  8. Install the right engine mount.
  9. Install the power steering pump drive belt and alternator drive belt. Adjust them to the proper belt tension.
  10. Remove engine support fixture and reconnect the negative battery cable.

For DOCH Engine, can visit autozone.com (free register) for more details.

Hope helped with this (remember rated this help) Good luck.

Nov 05, 2009 | 1991 Geo Storm

1 Answer

Replace timing belt


1993–96 2.3L and 2.6L Engines
  1. Disconnect the negative battery cable.
  2. Loosen and remove the engine accessory drive belts.
  3. Remove the cooling fan assembly and the water pump pulley.
  4. Drain the fluid from the power steering reservoir.
  5. Unbolt and remove the power steering pump. Unbolt the hydraulic line brackets from the upper timing cover and move the pump out of the work area without disconnecting the hydraulic lines.
  6. Disconnect and remove the starter motor if a flywheel holder (part No. J–38674) is to be used.
  7. Remove the upper timing belt cover.
  8. Rotate the crankshaft to set the engine at TDC/compression for the No. 1 cylinder. The arrow mark on camshaft sprocket aligns with mark on the rear timing cover.
  9. Remove the crankshaft pulley.
  10. Remove the lower timing belt cover.
  11. Verify that the engine is set at TDC/compression for the No. 1 cylinder. The notch on the crankshaft sprocket aligns with the pointer on the oil seal retainer.
  12. Release and remove the tensioner spring to release the timing belt's tension.
  13. Remove the timing belt.
  14. Unbolt the tensioner pulley bracket from the engine's front cover.
  15. If necessary, unbolt and remove the camshaft sprockets. Use a puller to remove the crankshaft pulley if necessary. Don't loose the crankshaft sprocket key. To install:
  16. Install the camshaft and crankshaft sprockets if they were removed. Align the timing marks and be sure to install any keys. Tighten the camshaft sprocket bolt to 43 ft. lbs. (59 Nm).
  17. Install the tensioner assembly. Tighten the tensioner mounting bolt to 14 ft. lbs. (19 Nm). Tighten the cap bolt to 9 ft. lbs. (13 Nm).
  18. Make sure the crankshaft and the camshaft sprockets are aligned with their timing marks. Install the timing belt onto the sprockets using the following sequence: first, crankshaft sprocket; second, oil pump sprocket; third, camshaft sprocket.
  19. Loosen the tensioner mounting bolt. This will allow the tensioner spring to apply pressure to the timing belt.
  20. After the spring has pulled the timing belt as far as possible, temporarily tighten the tensioner mounting bolt to 14 ft. lbs. (19 Nm). NOTE: Remove the flywheel holder before rotating the crankshaft. Reinstall the holder to torque the crankshaft pulley bolt.
  21. Rotate the crankshaft counterclockwise two complete revolutions to check the rotation of the belt and the alignment of the timing marks. Listen for any rubbing noises which may mean the belt is binding.
  22. Loosen the tensioner pulley bolt to allow the spring to adjust the correct tension. Then, retighten the tensioner pulley bolt to 14 ft. lbs (19 Nm).
  23. Install the lower timing cover and the crankshaft pulley.
  24. Tighten the crankshaft pulley bolt to 87 ft. lbs. (118 Nm). Tighten the small pulley bolts to 6 ft. lbs. (8 Nm).
  25. Install the upper timing cover.
  26. Install the starter if it was removed. Tighten the bolts to 30 ft. lbs. (40 Nm).
  27. Install the power steering pump. If the hydraulic lines were disconnected, refill and bleed the power steering system.
  28. Install the water pump pulley and tighten its nut to 20 ft. lbs. (26 Nm).
  29. Install the cooling fan assembly.
  30. Install and adjust the accessory drive belts.
  31. Connect the negative battery cable.

Jun 26, 2009 | 1995 Isuzu Trooper

2 Answers

Need instructions to replace 1993 Toyota Camry Timing Belt


Hi Kmcarroll77

TIMING BELT REPLACEMENT - 2.2L -1993 Toyota Camry

Installation
1.Install No. 2 idler pulley (if removed). Install and tighten bolt to specification. See TORQUE SPECIFICATIONS . Ensure idler pulley is clean and rotates smoothly. 2.Install No. 1 idler pulley and tension spring (if removed). Pry No. 1 idler pulley away from timing belt area as far as possible. Temporarily tighten No. 1 idler pulley bolt. Ensure idler pulley is clean and rotates smoothly. 3.Using crankshaft pulley bolt, rotate crankshaft so timing mark on crankshaft sprocket aligns with timing mark on oil pump housing. See. This will position keyway in crankshaft sprocket at 12 o'clock position.

CAUTION:If reusing timing belt, ensure reference marks on timing belt align with reference marks placed on crankshaft and camshaft sprockets. Ensure timing belt is installed in original direction of rotation.
4.Ensure all sprockets and idler pulleys are clean. Install timing belt on crankshaft sprocket, oil pump sprocket, No. 1 idler pulley, and then No. 2 idler pulley in sequence. 5.Install timing belt guide with cupped side away from crankshaft sprocket and flat side toward timing belt. Install No. 1 timing belt cover and new gasket. 6.Align crankshaft pulley key groove with key in crankshaft. Install crankshaft pulley. Install and tighten crankshaft pulley bolt to specification. 7.Rotate crankshaft clockwise so cylinder No. 1 is at TDC on compression stroke. Ensure timing mark on crankshaft pulley aligns with "0" mark on No. 1 timing belt cover. If reusing timing belt, ensure reference mark on timing belt aligns with upper edge of No. 1 timing belt cover. 8.Rotate camshaft, and align hole in camshaft sprocket with alignment mark on camshaft bearing cap. See Fig. 2 . Install timing belt on camshaft sprocket. If reusing timing belt, ensure reference mark on timing belt aligns with the reference mark on camshaft sprocket. Ensure tension exists on timing belt between the crankshaft and camshaft sprockets.
CAUTION:DO NOT rotate crankshaft counterclockwise, as viewed from timing belt end of engine.
9.Loosen No. 1 idler pulley bolt 1/2 turn. Rotate crankshaft pulley 2 full revolutions clockwise from TDC to TDC. 10.Ensure timing mark on crankshaft pulley aligns with "0" mark on No. 1 timing belt cover, and hole in camshaft sprocket aligns with alignment mark on camshaft bearing cap. See Fig. 2 . If timing marks are not aligned, remove timing belt and reinstall. 11.Rotate crankshaft clockwise 1 and 7/8 revolutions and align crankshaft pulley "0" mark with 45-degree Before Top Dead Center (BTDC) mark on No. 1 timing belt cover. See Fig. 5 . 12.Tighten No. 1 idler pulley bolt to specification. See TORQUE SPECIFICATIONS . Install No. 2 timing belt cover and gaskets. Install and tighten spark plugs to specification. 13.To install remaining components, reverse removal procedure. Install all bolts/nuts on right (timing belt side) engine mount before tightening to specification. 14.On Camry, when installing control rod and bracket on strut tower and right (timing belt side engine mount, tighten bolts to specification in sequence. See Fig. 6 . On MR2, tighten engine
b7619be.jpg
92cabaf.jpg
Hope this helps, don't forget to rate.

Lazaruselite

Feb 25, 2009 | 1993 Toyota Camry V6

1 Answer

Crankshaft pulley (vibration damper) moved forward.


the pulley is also a dampener often times they seperate from each other. replace pulley/dampener.

Nov 18, 2008 | 1993 Jeep Grand Cherokee

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

140 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Boyet Soriano
Boyet Soriano

Level 2 Expert

293 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...