Question about 2007 Suzuki Grand Vitara 4WD
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: cabin filter element location
Filter is located behind the glove box. All you need is a screwdriver to replace.
1. Open the glove box and empty to take the weight off the box.
2. On the right side there is a plastic hinge like device held on by one Phillips head screw. If you have trouble removing with a Phillips screwdriver you can remove with a narrow flat head screwdriver. Remove the screw and slide hinge off the mount.
3. To drop the glove box press the sides slightly inwards while 'forcing' it open beyond it's normal stopping point. Careful as when it releases it will fall wide open and may even fall from its hinged area. Set it aside.
4. Behind the glove box there is probably some fiberous material inserted to prevent noise like squeaking when it rubs. It is sticky on one side to hold it in place. Just remove and place out of the way.
5. Behind the fiberous material there'll be a cover which kinda looks like a grille. Mine was white and it is in the center of the opening. Remove it by releasing the clips at the left or right. It comes right out.
6. When the cover comes off slide the filter out and replace it. The filter lays flat and just slides in and out easily. However, if it has been some time since you replaced be prepared for a lot of debris on top of the filter such as leaves, grass or other general type of debris that has been sucked into the filter. It also may be the source of any bad odors that you smell through the air conditioning system.
7. Reverse the process. Replace the cover and push the glove box lid back into place. When you replace the glove box be careful to make sure the hinge you initiallly removed the screw from is not left behind the glove box or you will have to remove again to get it out. Replace the screw and do not over tighten as it screws into plastic and then your done.
Posted on May 07, 2009
Four or six cylinder engine and behind or front of the oil filter? Looked under my GV 2007 2.7 V6 and can not locate a shiny metal box next to the oil filter. Only thing that was shiny was the exhaust manifold and oil sump which are quite hard to break or puncture. If it was the oil sump you will have to remove it and get it welded as a bog will not hold on heated engine parts.
Posted on Nov 02, 2008
Tips for a great answer:
Sep 17, 2014 | 2007 Suzuki Grand Vitara 4WD
May 03, 2011 | Suzuki Grand Vitara Cars & Trucks
Mar 05, 2011 | 2007 Suzuki Grand Vitara 4WD
Oct 18, 2010 | 2007 Suzuki Grand Vitara 4WD
Feb 17, 2010 | 2007 Suzuki Grand Vitara 4WD
Feb 16, 2010 | 2007 Suzuki Grand Vitara 4WD
Dec 28, 2009 | 2007 Suzuki Grand Vitara 4WD
Nov 01, 2009 | 2007 Suzuki Grand Vitara 4WD
Oct 19, 2009 | 2007 Suzuki Grand Vitara 4WD
Oct 08, 2008 | 2007 Suzuki Grand Vitara 4WD
1,000 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: