Question about 2006 Honda Accord

1 Answer

Serviced my vehicle

Service indicator still luminated

Posted by on

  • verferguson Apr 19, 2009

    I don't see any thing that might be an instrument gauge., any idea what it may look like?

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Honda Master
  • 1,779 Answers

I believe your Honda has a slot on the dash (instrument gauge) where you can insert the cars key (Just insert straight in) and the indicator should go out. If you can't find it, or have further questions, please let me know. If you have your owners manual, it would have a picture or diagram showing you the exact location.

Posted on Apr 19, 2009

  • Curt Downs Apr 19, 2009

    On older accords, there is a slot to insert the key which resets the maintenance required indicator under the tachometer. I'm not sure if this location changed with the newer cars. What exactly was done to service the car? Are you referring to the check engine light, or maintenance required?

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What does the service engine light mean on a 2015 Ford Edge


Service Engine Soon

If the Service Engine Soon indicator light stays lit after you've started the engine, the On Board Diagnostics system (OBD) has detected a malfunction of the vehicle emissions control system. Contact your authorized dealer as soon as possible.
If indicator light is blinking, an engine misfire may be occurring, which could damage your catalytic converter. Drive in a moderate fashion (avoid heavy acceleration and deceleration), and have your vehicle serviced immediately.*
The Service Engine Soon indicator light illuminates when the ignition is first turned on (prior to engine start) in order to test the bulb, as well as indicate whether the vehicle is ready for Inspection/Maintenance (I/M) testing.
Normally, the Service Engine Soon light will stay on until the engine is cranked, then turn itself off if no malfunctions are present. However, if after 15 seconds this light blinks eight times, it means that the vehicle is not ready for I/M testing.Check this link out Gary.
https://owner.ford.com/how-tos/vehicle-features/dashboard-instrument-cluster/warning-lamps-and-indicators.html

Jul 19, 2017 | Ford Cars & Trucks

1 Answer

How can I tell whether the transfer case control module is defective and needs to be replaced?


Need to have it check for DTC'S - diagnostic trouble codes , see if a scan tool will communicate with it , see if it will show data PID'S .
SERVICE indicator (4WD/AWD) Lamp
The SERVICE indicator (4WD/AWD) lamp is an integral part of the cluster and cannot be serviced separately. This lamp is used to inform the driver of the vehicle of malfunctions within the automatic transfer case (ATC) system. The SERVICE indicator (4WD/AWD) lamp is controlled by the transfer case shift control module via CKT 1567.

Is your service indicator lamp lit ?
which of these does your jimmy have
Transfer Case - NVG 233-NP1 (Two Speed Selectable)
Transfer Case - NVG 236 (Two Speed Automatic)

Mar 20, 2016 | 1999 GMC Jimmy

1 Answer

Four wheel drive not working on 2002 chevy blazer


Is the SERVICE 4WD indicator lit ?
The SERVICE 4WD indicator is an integral part of the cluster and cannot be serviced separately. This lamp is used to inform the driver of the vehicle that a transfer case system malfunction. The SERVICE 4WD indicator is controlled by the transfer case shift control module via Class 2.
If so suggest you take it to a ASE certified repair shop !

Dec 15, 2015 | 2002 Chevrolet TrailBlazer

1 Answer

How am i supposed to get ride off the Service theft system?


It's hard to fix something if you don't know how it works ! Fixed ignition ? What did you fix or change ?
SERVICE THEFT SYSTEM
Security: Refer to Theft Systems Description and Operation in Theft Deterrent
You need to have it checked for trouble codes .
The theft deterrent system on this vehicle is comprised of two separate systems, the vehicle theft deterrent (VTD) system and the content theft deterrent (CTD) system. The VTD system prevents drive away theft by keeping the vehicle from starting. The CTD system is the vehicle alarm system which discourages unauthorized entry into the vehicle. These systems are described and diagnosed separately within this section.
Theft System Indicators
SECURITY The instrument panel cluster (IPC) illuminates the SECURITY indicator as determined by the vehicle theft deterrent (VTD) system and the content theft deterrent (CTD) system. The IPC receives a message from the theft deterrent control module or the rear integration module (RIM) via the serial data circuit requesting illumination.
?€¢
The VTD system requests the IPC to illuminate the indicator only when the ignition switch is ON. The VTD system uses the indicator as a malfunction indicator. For specific VTD condition that will illuminate the security indicator, refer to
Vehicle Theft Deterrent (VTD) Description and Operation .


?€¢
The CTD system requests the IPC to illuminate the indicator only when the ignition switch is OFF. The CTD system uses the indicator in order to identify system status. For specific CTD condition that will illuminate the security indicator, refer to Content Theft Deterrent (CTD) Description and Operation .


?€¢
The IPC performs the displays test at the start of each ignition cycle. The indicator illuminates for approximately 3 seconds.
SERVICE THEFT SYSTEM The radio illuminates the SERVICE THEFT SYSTEM message when the VTD system detects a failure. The radio receives a message from the theft deterrent control module via the serial data circuit requesting illumination.
This is one you need to take to the dealer , unless you have a GM factory scan tool !

Nov 21, 2015 | 2004 Cadillac CTS

2 Answers

RED LIGHT INDICATING OIL SERVICE


Hi. The oil service light in red indicates that the vehicle is over due for a vehicle service..OIL SERVICE.. If you don't have it done, it could all go wrong. Have the light reset after Service and then it will monitor for your next service.bye for now.

Feb 19, 2014 | 2002 BMW 3 Series

1 Answer

Service 4wd bad accelerator


Hi there:
The FDCM has a code, and for me to be able to correctly diagnose your vehicle..You will need to get that code retrieved by a scantool.\.

The service 4WD indicator gives an indication to the vehicle operator when the Final Drive Control Module (FDCM) has recorded a Diagnostic Trouble Code (DTC) for an electronic transfer case circuit or component malfunction. This indicator is controlled by the instrument cluster logic circuit based upon cluster programming and electronic messages received by the cluster from the FDCM over the Controller Area Network (CAN) data bus.

The service 4WD indicator function of the reconfigurable dot matrix Organic Light Emitting Diode (OLED) display unit is completely controlled by the instrument cluster logic circuit, and that logic will only allow this indicator to operate when the instrument cluster receives a battery current input on the fused ignition switch output (run-start) circuit. Therefore, the OLED service 4WD indication will always be OFF when the ignition switch is in any position except ON or START. The instrument cluster will turn ON the service 4WD indicator for the following reasons:

Service 4WD Indicator Lamp-On Message - Each time the cluster receives an electronic service 4WD indicator lamp-ON message from the FDCM, the service 4WD indicator will be illuminated. The indicator remains illuminated for about five seconds, until the cluster receives a lamp-OFF message from the FDCM, until the cluster arbitrator logic determines that another display request has priority, or until the ignition switch is turned to the OFF position, whichever occurs first.

The FDCM continually monitors the electronic transfer case control circuits and transfer case shift motor/mode sensor assembly to determine the condition of the system. The FDCM then sends the proper lamp-ON or lamp-OFF message to the instrument cluster, also known as the Cab Compartment Node (CCN).

For proper diagnosis of the FDCM, the CCN, the CAN data bus or the electronic communication related to service 4WD indicator operation a diagnostic scan tool is required. Refer to the appropriate diagnostic information.

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Jun 23, 2012 | 2000 Chevrolet Blazer

1 Answer

On the instrument custer the back lit light on the temp gauge was out so I took my 2002 Vue to a Chevolet dealer who has taken over the service of Saturns. They fixed the light for the temp gauge, but now...


The only thing to do is remove the cluster from the dash and replace the bulb! It isn't real complicated to do it just takes a little time and patience. Once it is removed you'll have to locate the correct bulb it will be labeled on the circuit board as to which one it is. Carefully remove the bulb and replace it with EXACT bulb replacement and re-install the dash. Again the key to doing this is PATIENCE as these can be frustrating locating ALL the retaining screws before forcefully prying on something and breaking it. Good luck, HAVE A SAFE AND PRODUCTIVE DAY!

Apr 12, 2011 | 2002 Saturn VUE

1 Answer

What does perform service service indicator light came on,what does that mean. 20.400 miles oil was changed @20,200 mikes


Perform service indicator warning is a heads up that another oil change is needed. Your vehicles computer calculates a duty cycle for service intervals; Driving distance, stop and go etc... Change the engine oil, and reset the alert, and you'll be fine.

Mar 06, 2010 | 2002 Jeep Grand Cherokee

1 Answer

1.8 vw servise light on


Due service
After service reset
Vehicles on longlife service intervals must have the service interval indicator reset using suitable diagnostic equipment. Vehicles on fixed interval servicing can be reset as follows: Press and hold button [A] 46988. Switch ignition ON. Release button [A]. The word "SERVICE" will appear in the trip recorder display. Press and hold button [A] until the word "SERVICE" is erased. Switch ignition OFF.
46988
46988 is trip button bottom of speedo

Jan 23, 2010 | 2001 Volkswagen Beetle

1 Answer

Service indicator....goes away too soon.


it sound like your car is due for Vehicle Check Service. I suggest you to visit to nearest BMW cervice center to do the necessary service and reset the CBS

Jan 20, 2010 | 2006 BMW 3 Series

Not finding what you are looking for?
2006 Honda Accord Logo

Related Topics:

128 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...