Question about 1997 Buick LeSabre

1 Answer

Right signal only works if lever is jiggled

I need to replace signal light switch in 1997 Buick LeSabre

Posted by on

  • donbon877 Apr 19, 2009

    I already stated I needed to replace switch. I was asking how. For a Guru that was not much advice. Maybe you could be more helpful.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 3,113 Answers

Replace turn signal switch.

Posted on Apr 19, 2009

  • honeymokey
    honeymokey Apr 19, 2009

    You did not ask how. It just read { Right signal only works if lever is jiggled.} You will need to remove air bag with a tamper proof torx bit. Remove nut from steering wheel and use a steering wheel puller to remove. Now the lock plate has to be removed with a special tool that presses it down to remove and re-install retaining clip. Once that is removed you will see the switch. Further dis-assembly of the steering column will be necessary to pull the wires through it. Go to the library and see if they have a chilton auto manual on this car. The air bag coil is on top of the lock plate and it could go off if not removed and installed correctly.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What causes my right turn signal to not work? Front or back!


Your worst fears are my guess. The multifunction switch has a problem and needs attention. Might not be the switch assembly, could be just a wire or the body control module. It sounds like you can easily reproduce the symptom, so a competent tech should be able to narrow down the cause quickly. A decent mechanic could fix it in an hour or two. 25316080-dz1fkxf1fwolart5ai0divhk-5-0.jpg

Dec 10, 2014 | 2004 Buick LeSabre

1 Answer

Turn signals are messed up


Yes ,the plastic cancel peg on the left is broken ,right is close
to breaking also,only fix is a new turn signal switch,sorry.
should be about a 60.00 job ,plus the switch .another 60.00or so.

Jan 06, 2013 | 1997 Buick LeSabre

1 Answer

Replace the signal flasher for 2002 buick le sable


Looks like the same problem I had on my 2004 Lumina. If the brake lights all work but not the left AND right signals both do not work it is most likely the flasher which is under the driver side of the dash. If you barely move the turn signal lever and the right or left turn on briefly then it is the switch OEM part number 26093875 verify the numbers to match your vehicle. The switch is located in the steering column and can be changed out in about 30 min. Be careful on keeping track of how you take it apart and put it back together.

Mar 19, 2011 | 2002 Buick LeSabre

1 Answer

Buick century 98 custom My girlfriends turn signals stopped working, they stopped flashing, then the hazard lights went out. Her mechanic said it is the daytime running module. Where can I price this out,...


intermidiate switch's are faulty in most LeSabres, it controls all your settings where as your day time running light modual only puts low voltage to your headlights, thats all. i had similar issues in my camaro, replaced the switch and all is better now.

Jun 08, 2010 | 1997 Buick LeSabre

2 Answers

95' Buick regal, 3rd brake light works, tail lights work, turn signals work, stoplight switch seems to work ie 3rd brake light working, fuse is ok, changed bulbs, but no rear brake lights.


If the third brake light works and the regular ones don't, it is most likely a bad turn signal (multifunction) switch. The switch is able to kill the brakes lights to run the turn signals, and in rare circumstances does this. I've seen it several times. It could also be wiring, especially near the turn signal switch, but it is usually the switch.

Nov 25, 2009 | 1995 Buick Regal

1 Answer

Turn signal not working


i had this same problem and i alleviated it by replacing the column switch which isnt an easy task and I used a manual (which can be obtained at the library for free or you can buy one at your loccal book or auto parts shop)

Aug 26, 2009 | 1994 Buick LeSabre

1 Answer

Signal Light doesn't work when lever is in the fixed position


sound's like you need a new signal switch, replacing it requires removing the steering wheel and airbag if equipped.

Jan 14, 2009 | 1993 Buick LeSabre

1 Answer

Right tail light and front right signal wont work unless signal or brake applied


Since this is happening only to one side of the vehicle and not the other than i would say you have an electrical fault in the switch and or a hot wire is broken not allowing your lights on that side to come on when told to do so.

Sep 09, 2008 | 2001 Buick LeSabre

Not finding what you are looking for?
1997 Buick LeSabre Logo

Related Topics:

239 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...