Question about 1985 Chevrolet S-10 Blazer

1 Answer

I test drove a 1992 chevy s-10 blazer 4x4.everything worked good except when I shifted from 4 low back to 4 high.I states you have to put it in neutral and put on parking brake to go from 4 high to 4 low which I did.Going from 4 low back up to 4 high the gears would grind any Ideas?

Posted by on

  • 1purepiney Apr 21, 2009

    I did have it in neutral as stated right on shifter.I own 3 4x4's now I think I know how they work!!!

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

Put in neutral !!!

Posted on Apr 21, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

4x4 K1500 Chevy Truck, 4 wheel drive repair instructions


There are a number of different hub systems so this may not work but it has worked for me on both auto and manual locking hubs. On a flat surface without traffic. Put the trans into neutral, shift the transfer case into 4x4, shift the trans into reverse and back the truck up 15-20 feet. Completely stop and shift trans into drive. See if this has locked the hubs in. If not, you can also try following the same instructions except shifting into 4wd low. Sometimes the hubs need a "bump" to get them to slip into place. Keep In mind that if the 4 wd low select works, you need to shift it back into 4 wd high before continuing! When taking the truck out of 4wd to 2wd, I recommend the same, shift to neutral, select 2wd, back truck up, shift back to drive and check. Its entirely possible that your hubs need maintenance (they're often overlooked) but hopefully this will get you going. Please let me know if thus worked or if I can offer other suggestions. Good luck!

Jan 18, 2012 | Chevrolet 1500 Cars & Trucks

1 Answer

I have a 1993 Blazer 4.3 V-6 4X4. The Low works to put it into it but the High does not work


test the 4 high button next is the switch on the transfer case. you could hear it click into gear under vehicle leave it in neutral when testing....lol

Dec 25, 2009 | 1994 Chevrolet S-10 Blazer

1 Answer

When i turn on my 01 Chevy blazer 4x4 it shift into 4 wheel low drove by itself


I assume since it is doing it by itself that you have the 3 push buttons on the dash to put it into 4wd? If so is the 4L button stuck in so it is constantly trying to put it in 4L. Maybe tap on that button to see if that button will release. If that don't fix the problem, I would imagine you would need to replace that switch?

Oct 03, 2009 | 1986 Chevrolet Chevy

1 Answer

How do you engage the 4 wheel drive in my 1989 Chevy S10 Blazer


ok, while stopped put car in neutral, shift transfer case lever to 4high or 4 low whichever you prefer, and voila put it back in drive and your now in 4x4

Oct 03, 2009 | 1989 Chevrolet S-10 Blazer

1 Answer

4 wheel drive not working


Vacume lines or vacume switch on transfer case,or vacume pod to front axle.

Jan 05, 2009 | 1993 Chevrolet S-10 Blazer

1 Answer

1993 4X4 BLASER 4WHEEL DRIVE


Your blazer is equipped with a shift on the fly four wheel drive. That means that at speeds less than fifteen miles per hour you can shift into or out of four wheel drive by simply pushing the four wheel high button. If you wish to shift into four wheel low. Stop, put the transmission into park or neutral, and push the four wheel low button. Same procedure for shifting back out. Never shift into or out of four wheel low while moving. And be careful in four wheel low. At full throttle your still barely moving, you don't want to blow your engine up!

Dec 31, 2008 | 1994 Chevrolet S-10 Blazer

1 Answer

94 s10 blazer wont go out of four wheel drive


The electric shift solennoid on the transfer case is probably bad,common problem with these.

Dec 25, 2008 | 1999 Chevrolet Blazer

4 Answers

96 chevey blazer 4x4


Sounds like the front axle electric actuator is bad. these are mounted on the front differential housing. they are known to go bad.

Nov 02, 2008 | 1996 Chevrolet Blazer

Not finding what you are looking for?
Cars & Trucks Logo

169 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...