Question about 2001 Ford Focus

2 Answers

2001 ford focus 2.0 DOHC

Need belt diagram

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 1,757 Answers

My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.
I have only been a free contributor to this site for the past 4-months.

I do not know if you still need this information, but I am going ahead and answering it anyway. You may want to Print the Diagrams for future use.

CLICK
on the following LINK. It has the Belt Diagrams you will need.

If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!

Again my apologies...
http://www.2carpros.com/car_repair_information/year/2001/make/ford/model/focus/2001_ford_focus_drive_belt_routing_diagram.htm

Posted on Mar 07, 2010

Ad
  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 18 Answers
Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

alicantecoli
  • 22156 Answers

SOURCE: timing belt diagram for 2001 ford escort zx2 dohc

cam shaft timing marks on back of cams ,two slots ,use a flat piece of metal to align .remove no1 spark plug and drop long thin screwdriver down it to bring piston just below tdc,then align cams so both cams are on the rock (valves closed) with knob on back cam aligning with pick up sensor left side between lobes.then bring piston up to tdc and fit belt.turn engine over twice with socket on bottom pulley to make sure no valves clear pistons.Remember to remove flat edge from back of cams i didnt last time and bent my home made tool

Posted on Jan 28, 2009

Molson02536
  • 3854 Answers

SOURCE: need a serpentine belt diagram for 2005 ford focus

You should have that diagram on the inside of your hood or on the fan shroud. Good luck

Posted on Apr 08, 2009

michigan man
  • 3533 Answers

SOURCE: belt diagram

for the most part there is a diagram under the hood showing you how the belt goes back on you can try www.autozone.com to see if they have your car listed but this is what i do i draw a diagram of the old belt before i take it off and that way i know how the new one goes on.

Posted on Apr 20, 2009

  • 21 Answers

SOURCE: Focus timing belt replacement.

This is a very very easy timing belt setup. first off you have to remove the valve cover. Then you have to remove the serp belt. Then remove anything thats in your way of the front cover. after you remove the crank pulley re-install the crank bolt. DO NOT LOSEN THE BOLT FOR THE TENSIONER!!!! now spin the crankshaft until the sproket aligns with the timing mark. now at this point the two camshafts should be aligned. now there is a special tool from ford that holds the cam shafts in place. all it is is a 1/4" peice of metal that goes on the left side of the cam shafts to hold them into place. if you mark the cams you wont need the tool. or if you can find something to fit in the left side of the cams that will work too. anyways after that its just the same steps in reverse. very easy to do.

Posted on Aug 31, 2009

  • 22 Answers

SOURCE: i need a routing diagram for the serpentine belt

c6eb5b9.jpg

Here ya go.

Posted on Jun 04, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Replace broken timingbelt


What engine does yours have ? 2.0l Zetec ? You need special tools !

May 31, 2015 | 2000 Ford Focus

1 Answer

Timing Diagram of 2000 Ford Focouse DOHC 2.0 Zetec


If you Blew off the timing belt then need Head work also since it is an interference Motor
meaning that the Valve train and Pistons Have no Clearance so U are going to need a lot more work than just a timing belt to run

Mar 31, 2014 | 2000 Ford Focus

1 Answer

Routing of idler belt


Looks like this might be it, but if not go to the link at the bottom of the page. hope this helps

s7002.jpg Search/Buy
Parts
From Catalog
check_info_from_catalog.gif
http://www.bestvalueautoparts.com/Replacement_Parts/FORD/FOCUS/Illust_c_Belt_Routing.html

Aug 19, 2010 | 2001 Ford Focus

3 Answers

2001 Ford focus


lol, I never knew they made a sohc focus, 99% of these are zetecs DOHC. so they have the spark plugs down the middle of the cyliderhead.

Jan 13, 2010 | 2001 Ford Focus

1 Answer

Ford Focus belts


timing belt, and drive belt. the timing belt needs special tools to replace, if its a 2.0 DOHC VIN "P" 8th digit. if its a VIN "3" SOHC no special tools are needed

Oct 21, 2009 | 2001 Ford Focus

1 Answer

The timing belt on a ford focus 1.6cc on a 2004 plate


In the Timing Belt and Serpentine Belt calagogue dont have 1.6L, only for 2.0L and 2.4L; maybe this can help you.


2004 Ford Focus 4-Cyl. 2.0 L


Timing Component Kit; W/DOHC Eng.; W/1-Idler Pulley

00b2a20.jpg


Timing Component Kit; W/DOHC Eng.; W/2-Idler Pulleys

c721678.jpg


Timing Component Kit; W/SOHC Eng.

f3dd0be.jpg



I hope help you with this. Good luck.

Sep 15, 2009 | 2004 Ford Focus

1 Answer

Diagram 2001 Focus timing belt installation


2001 Ford Focus 4-Cyl. 2.0 L

Serpentine; W/DOHC Eng.; W/A.C.

a4e447b.jpg

Serpentine; W/DOHC Eng.; W/O A.C.

a7b68af.jpg


Serpentine; W/SOHC Eng.; W/A.C.
6b09af4.jpg


Serpentine; W/SOHC Eng.; W/O A.C.
faaac9c.jpg


For more details about the
Timing Belts & Components, visit HERE.

Good luck (remember rated this help).

Sep 14, 2009 | Ford Focus Cars & Trucks

Not finding what you are looking for?
2001 Ford Focus Logo

Related Topics:

479 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...