Question about Chevrolet Lumina APV

1 Answer

Replacing front marker light bulbs - Lumina APV Chevrolet Cars & Trucks

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had to take the head light out, just as I would if I wanted to change that bulb. Then there is a small nut that holds your marker light cover in place. Just take that off, and barely pull it out, the bulb just pops right out from it's plug like the headlight. And that's that!

Posted on Apr 19, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replace marker light


Removal Procedure
  1. Open the hood.
  2. Remove the headlamp. Refer to Headlamp Bulb Replacement .
  3. Rotate the bulb and socket counterclockwise in order to remove the bulb and socket from the housing. Remove the side marker bulb (3) or turn signal/park bulb (4) from the socket.

Oct 01, 2015 | 2005 GMC Envoy

1 Answer

Have a 2010 2500 dodge the under mirror lights and the passger front marker and the passger reverse light wont work ?


Replace the bulb in the front lens to get the mirror and marker to work. Replace the the bulb for the reverse light also. Both are on seperate circuuits.

Mar 19, 2014 | Dodge Ram 2500 Cars & Trucks

1 Answer

Right front marker light


there is one top screw just remove the one top screw and pull the turn signal and side marker light housing off the fender then replace bulb.

Jan 08, 2013 | 1997 Nissan Pathfinder

1 Answer

Front side marker bulb replacement on 2006 liberty


CHECK FRONT SIDE MARKER LIGHT COVER SHOULD HAVE SCREWS TO REMOVE LIGHT COVER SCREWS THEN YOU CAN REPLACE BULB.

Aug 07, 2011 | 2006 Jeep Liberty

2 Answers

My rear marker/ running lights are out and i need to know how to get to them


Signal and Marker Lights Removal & Installation To Remove:
  1. Remove or disconnect the following:
    • Screw from the side marker lamp.
    • Side marker lamp from the front and/or rear bumper fascia.
    • Bulb/socket from the side marker lamp.
    • Bulb from the socket.
To Install:
  1. Install or connect the following:
    • Bulb to the socket.
    • Bulb/socket to the side marker lamp.
    • Side marker lamp to the front and/or rear bumper fascia.
    • Screw to the side marker lamp. Tighten to 2 N.m (18 lb in ).
prev.gif next.gif

Jan 08, 2011 | 2002 Pontiac Sunfire

1 Answer

How do I change the front side marker light bulbs?


Bi-Xenons - 6000K D1S
High Beams - Osram Nightbreakers H7
Fogs - PIAA H11 Yellow Ion
Cornering Lights - Osram Nightbreakers H3
Front Park Lights - High-Powered LEDs with built-in resistors
Front Signal Lights - Sylvania Silverstar 7507A ST (Silver Bluish but lights up Amber)
Front Sidemarkers - InviSilver W5W (Silver but lights up Amber)
Rear Signal Lights - P21W Stealth Bulbs (Silver but lights up Amber)
Reverse Lights - Sylvania Silverstar 7506ST or Error-Free LEDs
License Plate Lights - C5W Error-Free High-Powered LEDs
  • Turn the engine off and approach the side of the porsch with the burn-out side-marker light. If you are replacing both, start at either side; the replacement procedure is the same.
  • 2 Remove the screws from the plastic fender liner. Peel back the liner to access the area behind the fender.
  • 3 Reach your hand inside to gain access to the side-marker light's backing. Push the backing forward to release the side-marker lens; it's held in place by small clips.
  • 4 Grab the lens on the outer side and turn it over to access the back. Gently turn the bulb to release it from the plastic lens.
  • 5 Pull the bulb straight out to remove it from the electrical socket. Insert a new bulb, but do not touch the glass part of the bulb with your hand.
  • 6 Push the new bulb into the side-marker lens. Turn it clockwise to install it. Push the side-marker lens back into place. Apply gentle pressure to the lens to pop it back into its mount.
  • 7 Replace the screws along the edge of the fender liner.


  • Dec 04, 2010 | 2006 Porsche Cayenne

    1 Answer

    How to change side marker bulb in 1997 altima


    a53bade.gif

    The marker lights are removed by depressing the tab (arrow) with a thin bladed tool. Take care not to scratch the paint

    1. Disengage the bulb and socket assembly from the lens housing.
    2. Gently grasp the light bulb and pull it straight out of the socket.
    To install:
    1. Before installing the light bulb into the socket, ensure that all electrical contact surfaces are free of corrosion or dirt.
    2. Line up the base of the light bulb with the socket, then insert the light bulb into the socket until it is fully seated.
    3. To ensure that the replacement bulb functions properly, activate the applicable switch to illuminate the bulb which was just replaced. If the replacement light bulb does not illuminate, either it too is faulty or there is a problem in the bulb circuit or switch. Correct as necessary.
    4. Install the socket and bulb assembly into the lens housing.

    Dec 07, 2009 | 1997 Nissan.5 Altima

    3 Answers

    Replace parking/marker bulb front pass 98 Jeep Grand Cherokee


    look in between the marker and headlights its a screw there screw it out

    Apr 04, 2009 | 1998 Jeep Grand Cherokee

    1 Answer

    Headlight bulb replacement & side marker light bulb replacement


    i think there are two flat guide pins that hold the headlight assembly in .. just pull them straight up ..and the assembly should come out ..hencse replace the bulbs.

    Nov 15, 2008 | 1999 Pontiac Bonneville

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    402 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Chevrolet Experts

    yadayada
    yadayada

    Level 3 Expert

    76649 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22219 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    8518 Answers

    Are you a Chevrolet Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...