Question about Mitsubishi Pickup

2 Answers

Grill removal how do i remove l200 grill. can undo top screws and clips but not he lower ones

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 22 Answers

The lower clips are pushed down with a long screw driver from the front , when the grill is removed the clips need to be removed from the vehicle and put in the grill then push the grill in

Posted on Apr 18, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

How do I remove the front grill cadillac srx 2012 chrome

Posted on Nov 22, 2012

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to remove grill vw crafter 2015


25627252-cvq3qatcgrsuar2pir1fl3t4-1-0.png
Carry out following work: Removing: - Undo and remove bolts -4- at top from radiator grille -1-. - Lever out spreader rivets -3- (Qty: 4) from below using a screwdriver. - Push thickness gauge -6- with the thickest feeler (1 mm) into space between radiator grille trim -2- and clip -5-. Note
This releases the latch -arrow-. - Using the front end hook -3370--7-, pull the radiator grille trim -2- out of the clip -5-"carefully" in -direction of arrow-. Fit on the right-hand side. - With help of a second mechanic, pull radiator grille trim -2- parallel out of the clips -5-. Caution
Radiator grille trim -2- is seated very tightly in the clips -5-.

25627252-cvq3qatcgrsuar2pir1fl3t4-1-2.png
- Remove bolts -2- on left and right. - Remove radiator grille -1- upwards.
IF U NEED FURTHER INFO LET ME KNOW..

Apr 04, 2015 | Volkswagen Cars & Trucks

1 Answer

How to replace nissan murano 2011 front driver side turn light


Lift hood, remove grill plastic screws on top, jack car left hand side, remove corner screw on end of bumper, undo lower splash shield screws, slide bumper away from car {about 4 inches}, remove,top bolts on headlight and lift out, the is a locating slot that you will need to manipulate it from, assembly is the reversal. good luck.

Oct 20, 2013 | 2007 Nissan Murano SE

1 Answer

How do you remove the passenger side rear door panel in a 2006 Fiat Punto


1 Prise out the trim cap and undo the screw securing the exterior mirror inner trim panel of door
2 Where a manually-adjustable exterior mirror is fitted, prise the rubber cover off the adjustment lever, then unscrew and remove the locking collar using pointed-nose pliers.
3 Pull the panel from its location to disengage the retaining clips. Disconnect the loudspeaker wiring connector and remove the panel.
4 Lift off the trim caps, undo the retaining screws, then remove the door interior handle surround.
5 Carefully prise off the loudspeaker grille then undo the three loudspeaker retaining screws. Withdraw the speaker from the door and disconnect the wiring connectors.
6 Undo the three retaining screws in the loudspeaker aperture, and the single screw in the oddments pocket just below the aperture.
7 Lift out the loudspeaker protective cover and withdraw the loudspeaker wiring from the base of the cover.
8 Prise out the trim cap and undo the screw securing the rear of the trim panel to the door frame of Fiat Punto car.
9 Undo the screw at the upper front corner of the panel, and the remaining four screws securing the lower edge of the panel to the door frame.
10 Using a suitable forked tool inserted between the door and the trim panel of Fiat Punto, release the press-stud clips located around the edge of the panel, then lift the trim panel upward.
11 Pull the panel from the door, noting that the lower window aperture weatherstrip is integral with the trim panel and must be released from tie door as the panel is withdrawn.
12 If work is to be carried out on the door internal components, it will be necessary to remove the plastic sealing sheet from the inside of the door. Start at one comer of the sheet and carefully peel it away, using a sharp blade to split the sealant bead, if necessary.
13 Store the detached sealing sheet such that it cannot become contaminated with dust; this will allow it to be re-used later.
Source (with illustrations) - Door inner trim panel removal and refitting FIAT Punto
11_26_2014_6_35_50_pm.jpg

Feb 22, 2013 | Fiat Grande Cars & Trucks

1 Answer

2003 escalade how to remove front bumper.


I just took this one on today. You'll need a flat head screw driver (a clip puller if you have one) a 15mm socket with a 10" extension and 10mm socket. Pop the hood, remove the plastic guard over the radiator and grill. Remove the 10mm bolt in the center of the grill. Remove the grill by popping the clips off each side then the grill will remove by pulling up. Remove the headlights by removing the two pins, one on top one on the inside of the lamp assembly. Remove 4, 15mm bolts from the top side of the bumper (2 upper, 2 lower that require the extension). From underneath the vehicle remove 2 more 15mm bolts (one from each side). The bolts are located just outside of the fog light assembly and sit horizontally. The bumper is now ready to be uncliped. From the inside of the wheel well use a Flathead screw driver to push in the clip while pulling the bumper away from the mounts. I used a large floor mat to keep the bumper from hitting the ground directly. It's helpful to have a second person to help on the last step.
Good Luck!

Aug 16, 2010 | 2004 Cadillac Escalade

1 Answer

How do you take the grille off of a 1996 isuzu trooper 2




Trooper
See Figures 3, 4 and 5


a06490f.jpg
Fig. 3: Front grille assembly-1984-94 Trooper


e8688ea.jpg
Fig. 4: Front grille assembly-1995-96 Trooper


57fd329.jpg
Fig. 5: Retainer clip used to secure the front grille
  1. Raise the hood and support it with the prop rod.
  2. On 1981-94 models, remove the retainer screws from around each headlight.
  3. Remove the retainer screws from the corners and center of the grille.
  4. Using a small prytool to press the tab on each of the grille retainer clips at the top of the grille upward while pulling the grille away from the radiator support.
  5. When all the tabs have been released, lift the grille up slightly and out to remove.
To install:
  1. Engage the lower portion of the grille into the radiator support.
  2. Carefully push the grille toward the radiator support, making sure the retainer clips align with their respective mounting hole. Once all the holes align, press the grille and retainer in until it clicks into position.
  3. Install the retainer screws from the corners and center of the grille.
  4. On 1981-94 models, install the retainer screws around the headlight.

Hope helps (remember rated this).

Jul 09, 2010 | 1996 Isuzu Trooper

1 Answer

How do you take out headlight assembly right side of a f250 1993


Remove the screws that hold the grill in place. Undo the clips right and left front in the lower section of the grill (push the bottom part up) and pull out carefully. Take out the three 11mm bolts that hold in the parking light assembly (you may have to remove the battery tray, or the wiper bottle/expansion tank depending on which side) and unplug the parking light bulbs. There is a Ford headlight tool to remove the clips on the headlight anchors that are now accessible. But it stinks. Remove the clips as best you can and try not to damage them. Sometimes they pop off with a screw driver and it'd almost be like trying to teach someone how to knit over the internet to explain exactly how they work. But once you get one off, the others come easier. I apologize that I can't be more specific on the clips, but they really are a design flaw.

Mar 18, 2010 | 1993 Ford F250

1 Answer

How do you remove front grill on Susuki grand vitara so I can replace sidelight bulb


Remove the clips that secure the top of the radiator grille. Pry up the center piece and pull up the clip to remove it. There are 5 screws on the bottom of the grille piece that you have to take out. BE VERY CAREFUL with the grille when pulling it out as it idoesn't take alot of force to break it. Next undo the screws that secure the headlight housing (3 total), there is also something called a guide pin on the housing. Detach the connector from the bracket by squeezing the lock tip with pliers. That should give you complete access to the lamps inside the housing.

Apr 02, 2009 | 2002 Suzuki Grand Vitara

1 Answer

Need to replace the driver's door interior door opening assembly


Hi there.

The procedure is roughly the same for all mk3 x types.
You need to remove all the screws on the armrest and on the ashtray, then undo all the plastic clips using screwdrivers on the panel.

You find detailed instructions on links below, I quote:

" remove two screws at the bottom of the armrest.
pull out ash tray.
remove screw in the middle of the ash tray holder.
pull up on armrest, it should pop up, then pull it out
start at bottom right of door and start popping out the plastic clips (all the way around the door)
(remove speaker wires)
push up door panel - done"



WikiAnswers - How do you remove a rear door panel in a Jaguar XJ6


Also from manual:

Disconnect vehicle battery ground lead.
Remove the door trim pad veneer panel.
Remove the upper trim pad.
Remove the door armrest.
From inside the door pocket, release the puddle lamp (1 Fig.1) securing quarter turn fastener.
Undo and remove fixing (3 Fig.1), (front door only)
Carefully release lower trim pad fir tree fasteners.
To avoid damage and distortion of the door metal, lift the lower trim pad complete with clip and clip retainer.
Carefully pull the trim pad away from the door panel.
Disconnect the multi-plugs (1 Fig.2) and remove the lamp.
Carefully displace the trim pad (2 Fig.1) from the door retaining clips.
Disconnect the multi-plugs (2 Fig.2) and (3 Fig.2).
Remove the door pocket.
Displace and remove the retaining clips and remove the trim..
Refit in the reverse order of the removal procedure. Check the trim pad retainers for damage before refitting.

Before refitting the lower trim pad, remove the clip retainer from the pad and and reposition retainer to the door.

ndo door handle escutcheon screw and remove escutcheon
Remove the door trim pad veneer panel.
Undo and remove the upper trim pad securing screws.
Remove the chrome strip.
Undo and remove the top channel securing nuts.
Displace and remove the top channel assembly.
Place the trim pad aside (Fig. 1).
Refit in the reverse order of the removal procedure.

bbad647.gif

36a4a47.gif

cc1f9fe.gif

Thanks Jaguar XJ6 Interior Lights

I will be grateful if you can rate the solution given.

Many thanks.

G.

Feb 25, 2009 | 1995 Jaguar XJ6

2 Answers

Driver side power window stopped working


The door panel is held on by plastic clips and 5 screws. 3 screws are on the bottom and 1 in the pull cup and 1 in the inner door handle.Then grab one of the corners and give a small tug, when you get some of the clips to pop out then proceed around the whole panel. To replace the panel take the clips out of the door with a fork and slide them back into the panel and then line it up on the door and use your hand like a hammer and bang the panel back on. Hope this helps

Jan 12, 2009 | 2004 Chrysler Sebring

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

1,103 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8572 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...