Question about 2003 Pontiac Montana
My problem is on power sliding door once the contacts touch it reopens unless I give it a small push right then.I have clean the contacts till they shine still does the same.
Please check and see if you have a blown fuse. There should be a fuse for that either somewhere on the side of the dash or near the brake pedal area. If not it may be under the hood, but it should be inside the vehicle. You may have multiple fuse boxes.
If it has (2) sliding doors it will have a wire for the auto doors in each kick panel (under the plastic trim/molding) when you open the door and look down you will see all of the trim/molding it should snap out or may be held in place with a screw or (2).
Once you remove that you should see the wires. It says for the left side it is either light blue or black and the right side is definitely light blue. Trace this wire until you find out where it ends (the motor or switch to control the auto doors) then test the switch/motor to see if it is bad.
You can also use a piece of 3M scrubbing pad to scuff up the contacts on the door and the door jam contacts.
Please do accept this solution and revert for further assistance.
Posted on Apr 23, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Feb 27, 2017 | 2000 Pontiac Montana
Mar 25, 2013 | 2000 Pontiac Montana
Feb 15, 2011 | 2003 Pontiac Montana
Dec 17, 2009 | 1999 Pontiac Montana
Aug 19, 2009 | 1999 Pontiac Montana
May 27, 2009 | 2003 Pontiac Montana
May 17, 2009 | 1999 Pontiac Montana
Feb 12, 2009 | 2006 Pontiac Montana SV6
Jan 26, 2009 | 1999 Pontiac Montana
Mar 14, 2017 | 2003 Pontiac Montana
307 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: