Question about 1992 Acura Vigor

1 Answer

I have a 92 acura vigor gs.The Check Engine Light is on!!

I know all the steps to get the light to start flashing the codes!! BUT,here is the problem,when I turn the key on all the light dose is one long flash after another!! It will Flash one long flash shut off for 2-3 sec. one long flash shut off 2-3 sec and will repeat this and won't stop for as long as you have the key on!!!! I bought a brand NEW cpu,thinking that was my problem!!!! Because the flash is not consistent with the list of codes!! I installed the new cpu and got the same thing!!!! So its not the cpu!! So then I thought maybe its a code 1 which is an Oxygen Sensor! I bought a brand NEW O2 sensor!! I went through the process of resting the cpu, started the car and the light came back on right away!!! Same Flash!! Now if I go through and unplug sensors and check the CEL it will read each one thats unplugged,the it will do the one long flash after another at the end!!!! over the last few weeks when I'm driving at a steady speed the car will start cutting out like its not getting fuel,if I push in the cluch it will idle fine and rev up like nothing is going on!as sooon as i let out of the clutch and try to maintain a steady speed it will start doing it again!! NOW if I just stop it to the floor it comes out of it and won't do it again the whole time I'm driving!!!! SOMEONE PLEASE HELP!!!!!!!!!!!!!!!!!!!!

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

It was the IAT Sensor (Intake Air Temperature)!!!!!! the check engine light is out and the car is running great!!!!!!!!!!!!!!!!!!!!!

Posted on Apr 20, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Where is the obd diagnostic port on a 94 vigor.

Acura engine codes - OBD-II models, the check engine light is referred to as malfunction indicator light (MIL). ... On Legend coupes, 1991 and later Legend sedans, 1990 through 1994 Integras and all Vigor models, ... 23- Front knock sensor ( some NSX, Vigor)

Sep 01, 2015 | Cars & Trucks

1 Answer

Reset oil lamp acura integra 1992 gs

Turn the key to the "on" position, not start, step on the gas pedal 3 times, turn key tp off and then start the car. This works on most cars for the oil change light. If it is the oil pressure light get in for service very soon. Low pressure can kill your engine.

May 06, 2012 | 1992 Acura Integra Hatchback

1 Answer

Does the engine come out from the top or bottom on a 92 acura vigor also what other cars have the same engine that will fit

This engine comes out with the trany from the top, as far as engines i think a few are interchangeable from acura.

Aug 30, 2010 | 1992 Acura Vigor

2 Answers

92 acura vigor clutch replcd still wont go in gear

Is all the air bled out of the hydraulics??

I would then suspect a faulty clutch component.

Was it like this before the overhaul??

Mar 10, 2010 | 1992 Acura Vigor

1 Answer

1992 Acura Vigor GS: Stabilizer bar link bushings.

The dealer should have the replacement bolts such as Delray Acura or go to a wrecker that has a 92-94 Vigor, they're all the same.

Sep 06, 2009 | 1992 Acura Vigor

2 Answers

92 Acura Vigor sStarting problem could be your alternator or it could be your feul pump...or it could be ur distributor cap...hope i solved your problem :)

Jul 17, 2009 | 1992 Acura Vigor

1 Answer

Location of fuses for 92 acura vigor

they are below the driver side kick panel. It has a round latch turn over clock wise and pull cant miss it. Also there is another fuse box in engine compartment by the battery it has a cover pull it off.

May 18, 2009 | 1992 Acura Vigor

3 Answers

Where is the outlet to plug in a code reader on a 92 acura vigor?

You are WRONG Guru!!!!!!! Elpachuko is right!! BUT, if your check engine light is on and you want to know why there is a way!! On the passenger side of the center console,underneath the dash,pull the carpet down,you should be right at the wiring going into the the back of the stereo,THERE IS A 4 PRONG PLUG THERE NOT PLUNGED INTO ANYTHING,IT ONLY HAS 2 WIRES GOING TO IT!! Plug a paper clip into the 2 wires and turn on the egnition! the check engine light will start flashing,a series of short flashes will be a single digit code,long fashes followed by short flashes will be a double digit code!! This also works to trouble shot your ABS system!!!

Feb 01, 2009 | 1992 Acura Vigor

2 Answers

92 acura vigor battery

you def. fried all your fuses, and the battery, take it to a shop.

Sep 09, 2008 | 1992 Acura Vigor

Not finding what you are looking for?
1992 Acura Vigor Logo

393 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acura Experts


Level 3 Expert

80339 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you an Acura Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides