Question about 2003 Mercury Grand Marquis

1 Answer

Need help in bleeding brakes on 92

Need help on mercury Grandmarque 92 bleeding brakes how to do. thank you for your help

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Always start with the wheel furthest from the master cylinder. Have someone sit behind wheel and pump the brake pedal 5 times and hold the fifth pump to the floor. The other person, while the pedal is still held to the floor, opens the bleeder valve and releases all fluid and air and closes the valve. Then and only then does the person behind the wheel release the brake pedal. Repeat this process at each wheel until no sign of air bubbles are present in the fluid. Then move to the next closest wheel to the master cylinder. Be sure to periodically check and refill the brake fluid in the master cylinder. Good luck!

Posted on Apr 26, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 92 Oldsmobile and it was leaking brake fluid so I had master brake cylinder replaced bled out brakes they're still spongy what can be wrong I'm growing frustrated


are you sure the master was your leaking problem if u are sure--- than keep bleeding keep bleeding it can take what seems forever to bleed a whole brake system

Jul 08, 2015 | Oldsmobile Cars & Trucks

1 Answer

Bleed brakes on 92 Toyota corolla


Do a search on youtube and you will be able to watch a video of how to do this.

Sep 11, 2014 | 1992 Toyota Corolla

1 Answer

92 ford f 350 brakes goes to floor


Q: You mean after replace the brake and there is not pressure at all when you brake...?
A: Yes. Then you have to bleed the brake lines. You should be good to go. Still need help how to bleed it...? Let us know.

Mai

Apr 13, 2013 | Ford Cars & Trucks

1 Answer

I need to bleed my brakes on my 1993 mercury sable


So what are you asking?

Nothing special

Start engine,put helper in
driver seat,same as the last time
you bleed brakes

Feb 09, 2011 | Mercury Sable Cars & Trucks

1 Answer

WHAT MAKES MY MERCURY GRANDMARQUE SOUND LIKE VALVES RATTELING ? It made this sound in the old engine, know that i have installed a new engine, it's doing the same thing.


COULD BE WRONG OIL VISCOSITY.OIL COULD NEED CHANGING.COULD HAVE ENGINE DETONATION DUE TO WRONG OCTANE GAS.IF ALL LOOKS GOOD TAKE VECHICLE BACK TO DEALERSHIP NEW ENGINE HAS WARRANTY YOU ARE COVERED.

Nov 12, 2010 | Mercury Grand Marquis Cars & Trucks

2 Answers

Spongy brakes


Make sure the brake hoses are not colasped and holding pressure on the brake liners,and if the hoses are fine,then replace the master cylinder.

May 31, 2010 | 1995 Mercury Villager

3 Answers

Does the car need to be running when you bleed the brakes?


no but its best to have two people one to bleed the lines and the other to "push" on the peddle as you bleed to "push" the air out of the lines

Jul 30, 2009 | 1996 Mercury Cougar XR7

1 Answer

Bleeding brakes on 92 pontiac sunbird


start at the rear wheel on passenger side, then the driver side rear, then bleed the passenger side front then the driver side front, don't let the master run out of fluid, check at least after each wheel, bleed until you don't have air spurting noise and u have a solid stream of brake fluid out the bleeder port, u can buy a brake bleeder wrench from any parts store for a few dollars...

Feb 19, 2009 | 1992 Pontiac Sunbird

2 Answers

92 accord clutch bleed


This system has to be pressure bleed.

Dec 11, 2008 | 1994 Acura Integra

Not finding what you are looking for?
2003 Mercury Grand Marquis Logo

205 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

fordexpert

Level 3 Expert

5546 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...