Question about 2004 Nissan Murano
How do i replace the alternator,is there a guide or a diagram i can follow step by step.
This issue is under recall. If you have not had it replaced by a dealer, call immediately! I believe the recall involves the mounting bracket breaking.
Posted on Jul 22, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
here's 96. should be the same. Be very careful not to overtighten any of the belts or you can break the snout off the crankshaft and ruin you engine.
Section 14-02: Generator, Integral Regulator — Internal Fan and Regulator Type 1996 Villager Workshop Manual
REMOVAL AND INSTALLATION Generator Removal
To install, reverse the removal procedure. Tighten the inner generator-to-bracket bolt to 23-26 Nm (17-19 lb-ft). Tighten the outer generator-to-bracket bolt to 23-26 Nm (17-19 lb-ft). Tighten the generator locking bolt to 16-20 Nm (12-15 lb-ft). Adjust the drive belt very carefully. Refer to Section 03-05 for the procedure.
Posted on Jun 17, 2009
its not that hard to install but you need the right tools you should get a chilton manual for you car in particular and you'll find a step by step I recommend this because you can read and learn at the same time you work on your car try it you may enjoy working on your car GOOD LUCK
Posted on Jul 26, 2009
If you ask for a one wire delco alternator,all you have to do is connect the large wire on back of the alternator to the positive battery post on the battery.The alternator is self energizing,there for no problem with wiring up a harness.If I can help,let me know my name is Ron.>>>firstname.lastname@example.org
Posted on Aug 16, 2009
If they haven't moved it from the last place I remember seeing it (back on the passenger side near the firewall), It's not a fun job and definitely requires some skill and patience to r&r. But, not impossible. Haynes or chiltons have fairly decent instructions and only cost about $20.
Posted on Sep 04, 2009
Tips for a great answer:
Feb 21, 2016 | Nissan Cars & Trucks
Jul 11, 2015 | Nissan Cars & Trucks
Jan 29, 2014 | 2006 Nissan Murano
Jan 12, 2013 | 2004 Nissan Murano
Feb 04, 2011 | Toyota Corolla Cars & Trucks
Feb 06, 2010 | 2004 Nissan Murano
Oct 27, 2009 | 2004 Nissan Murano
Jun 02, 2008 | 2005 Nissan Murano
1,089 people viewed this question
Usually answered in minutes!