Question about 1995 Mitsubishi 3000GT

1 Answer

My son recently bought a 3000GT SL but, the sunroof regulator assembly had been removed and disassembled. I have a box of parts, with definetly some screws missing but, I can only partially figure out how to re-assemble it. Does anyone have an exploded view of it or could someone post a picture of the assembly with it in the extended mode. I would very much appreciate any help. Thanks

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 379 Answers

I may have a blow up in my service manual. If you haven't gotten it together, email me at OneRide2869@yahoo.com and I'll scan and email you the exploded diagram and instructions if my manual has them. BTW, an eBay seller, sphear_media, has 3000GT manuals on CD for around $10. You should get one. Trust me, you are gonna need it. I know, I own a 91 3000GT.

Posted on May 01, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to install replacement sunroof motor on a 1999 Pontiac grand prix


Important: This sunroof system is timed from the factory in order to allow the actuator to shut off automatically when the sunroof window reaches a certain position. Use extreme care when removing the actuator from the sunroof module. This may cause the timing to be thrown off. This may damage to the sunroof. Anytime the actuator needs to be removed from the module, ensure that the sunroof window is in the fully closed position.
Remove the sunroof window. Refer to Sunroof Glass Panel Replacement .
Slide the sunshade fully rearward. Move the sunroof window to the vent position. Remove the sunroof screws (two on each side). Remove the sunroof window from the module.
Place the sunroof module in the fully closed position. Remove the headliner. Refer to Headlining Trim Panel Replacement in Interior trim.
Tools Required ?€¢
J 38778 Door Trim Pad and Garnish Clip Remover


?€¢
J 2772-C Headliner Installer

  1. Remove the sunshades. Refer to Sunshade Replacement .
  2. Remove the overhead console, if equipped. Refer to Roof Console Replacement .
  3. Remove the sunshade retainers. Refer to Sunshade Anchor Replacement .
  4. Remove the power sunroof switch, if equipped. Refer to Sunroof Switch Replacement in Roof.
  5. Remove the sunroof trim lace, if equipped. Refer to Sunroof Seal/Molding Replacement in Roof.
  6. Remove the dome light, if equipped.
  7. Remove the coat hooks. Refer to Coat Hook Replacement .
  8. Remove the assist handles. Assist Strap Replacement
  9. Remove the rail lamp. Refer to Roof Side Rail Lamp Replacement in Lighting.
  10. Remove the windshield side garnish molding. Refer to Windshield Pillar Garnish Molding Replacement .
  11. Remove the upper quarter trim panels. Refer to Rear Quarter Upper Trim Panel Replacement .
  12. Remove the center pillar upper trim panel. Refer to Center Pillar Upper Trim Panel Replacement .
  13. Pull down on the door opening weatherstrip seal on both the front and the rear doors.
  14. Remove the 2 rear retainers (2) using J 38778 Door Trim Pad and Garnish Clip Remover. Disconnect the headliner electric harness at the right side of the rear window shelf. Rotate the right front seatback to a horizontal position. Remove the headliner from the vehicle through the right front door.
Disconnect the electrical connector from the actuator.
Important: Before removing the actuator, ensure that the pins J 41718 are tight and holding the cable.
Thread the J 41718 into the front sunroof window screw hole in order to retain the cable adjustment. Remove the sunroof actuator screws. Remove the sunroof actuator from the module. Did you look for a video on youtube ?

Feb 27, 2015 | 1999 Pontiac Grand Prix

Tip

Mazda3 Sunroof Adjustments & Repairs


Folks -

The "gearbox" is unfortunately under the headliner with no easy access. If you are also experiencing a clicking sound when the motor is activated, the regulator track had slipped position and will need to be reset.

http://img696.imageshack.us/img696/2781/roofadj04.jpg
IMAGE WONT POST, SORRY

Removing the map light assembly (process below) may help in your initial diagnosis, you can feel the motor mounting screws and the motor assembly to determine if their loose.

http://img696.imageshack.us/img696/8415/roofadj03.jpg
IMAGE WONT POST, SORRY

I have been through this problem twice now. The first time the motor / gearbox came loose from it's mounts, began slipping (click, click,click), very nasty sound. I remounted the motor with threadlock on the NEW ALLEN HEAD screws, but alas.. two years later (mine's 2006) it slipped again.. I need to drop the headliner once more and have a look. If you would like a copy of your 05/06 FSM, drop me a line.


Here's the RESET procedure from the FSM, absolutely gospel, no other way to fix it:

Sunroof Motor Assembly Note:

Note
• If the guide is removed, initial position setting of the sunroof motor will be required. After installing the sunroof unit, perform initial position setting using the following procedure.

1. Press the TILT UP switch to fully tilt up the glass panel.

2. When the glass panel reaches the fully tilt up position, temporarily release the TILT UP switch and press it again for approx. 13 s continuously. Continue pressing the switch until the glass panel automatically stops at the fully tilt up position after reaching the mechanical lock position.

3. When the glass panel stops at the fully tilt up position, temporarily release the TILT UP switch, then press it again within 5 s and hold.
Note

• Press the TILT UP switch continuously until the glass panel opens to the fully open position, returns to the fully closed position and then stops.

4. Release the TILT UP switch when the glass panel stops at the fully closed position.


ALSO, Here's the clearance adjustment specs for having the glass panel in the correct resting position:

GLASS PANEL ADJUSTMENT

1. Fully close the glass panel.

2. Measure the gap and height difference between the glass panel and the body.

3. Loosen the glass panel installation screws and move the glass panel to adjust.

http://img696.imageshack.us/img696/3097/roofadj01.jpg
IMAGE WONT POST, SORRY

Standard clearance a: 0.2-2.2 mm {0.008-0.08 in} b: 0 mm {0 in}
4. Tighten the screws.

5. Insert any available thin plastic card between the weatherstrip and the body, and verify that they are sealed. (There is resistance when the plastic card is moved.)

http://img696.imageshack.us/img696/610/roofadj02.jpg
IMAGE WONT POST, SORRY

• If they are not sealed, perform Steps 3-4 and adjust again.

MAP LIGHT REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.

2. Insert a tape-wrapped flathead screwdriver into the gap between the headliner and the map light.

3. Press the tab and remove the map light.

http://img94.imageshack.us/img94/2121/roofadj05.jpg
IMAGE WONT POST, SORRY

4. Disconnect the map light connector.

http://img696.imageshack.us/img696/3024/roofadj06.jpg
IMAGE WONT POST, SORRY

5. Remove the socket, then remove the map light bulb.

6. Install in the reverse order of removal.

SUNROOF UNIT DISASSEMBLY/ASSEMBLY

1. Disassemble in the order indicated in the table.

2. Assemble in the reverse order of disassembly.

http://img268.imageshack.us/img268/9769/roofadj07.jpg
IMAGE WONT POST, SORRY

1 Screw A
2 Drip rail
3 Sunshade stopper
4 Screw B
5 Sunshade
6 Deflector
7 Screw C
8 Sunroof motor
9 Rear drip
10 Guide
11 Decoration link
12 Front drip
13 Tape protector
14 Short cord
15 Frame

on Jan 01, 2010 | Mazda MAZDA3 Cars & Trucks

1 Answer

Fuse sunroof


There is fuse #2 15Amp in junction box on left hand side of the dash assembly this will disconnect the power sunroof motor/module fused B+ and to the sunroof switch.

Jul 29, 2014 | 2005 Jeep Grand Cherokee

1 Answer

2005 CTS sunroof assembly - Wind deflector.


What have you got to lose by trying it? I would think that the worst case scenario would be that you will need a $550 sunroof assembly if you remove the rivet and it doesn't work to solve the problem....

Jun 16, 2012 | 2005 Cadillac CTS 3.2

1 Answer

Where is the FUEL PRESSURE REGULATOR


Under the upper intake manifold:

This procedure is for the CSFI system as the CMFI system uses an integral fuel pressure regulator. The CSFI uses a replacable unit mounted on the CSFI assembly.


REMOVAL & INSTALLATION

  1. Disconnect the negative battery cable.
  2. Relieve the fuel system pressure. Refer to the fuel system relief procedure in this section.
  3. Remove the upper manifold assembly.
  4. Remove the fuel pressure regulator vacuum tube.
  5. Disassemble the fuel pressure regulator snapring retainer.
  6. Remove the fuel pressure regulator assembly and the O-rings. Discard the O-rings, filter and back-up O-rings.

To install:
  1. Lubricate the O-rings with clean engine oil and install as an assembly.
  2. Install the fuel pressure regulator, attach the vacuum tube.
  3. Install the snapring retainer.
  4. Install the upper manifold assembly.
  5. Connect the negative battery cable.

Oct 02, 2010 | 1993 Chevrolet Astro

1 Answer

Where is the fuse for the electric window ?


Step one is to check the 30 amp window/sunroof fuse in the underhood fuse box.

Do the windows not work from any of the switches?
Does the dome lamp work?
Does the sunroof work if you have one?
Have you tried swapping the window relay with another one of the same part number? The relays should be labeled on the fuse box covers as to which ones thay are. The relay should be in the right side fuse block in the car.

Sep 03, 2010 | 2000 Saturn SL

1 Answer

Sun roof will not open or close


First check your fuse box, for any fuse blow, position 26 in the Passenger Fuse Box (Box C), then keep in mind that the power sunroof is controlled by a switch that selects the direction of travel of the sunroof. The switch changes the polarity of the voltage going to the sunroof motor. This changes the rotation of the motor, thereby changing the direction of sunroof travel.


REMOVAL & INSTALLATION
(see Figure 1)
  1. Open the sunroof to the ventilation position.
  2. Disconnect the battery ground cable.
  3. Push down the sunroof headlining with a finger. Unhook the retaining springs with a bent piece of wire.
  4. Pull down on the headlining sufficiently to pass beneath the gutter rail. At the same time, slide the sunroof to the rear to release the catches at the front.
Do not pull the sunroof too far to the rear; otherwise, it will be difficult to remove again.
  1. Unhook the spring retaining brackets.
  2. Remove the retaining screws from the sides and front.
  3. Remove the sunroof.
To install:
  1. Fit the sunroof into position and install the retaining screws.
  2. Install the spring retaining brackets.
  3. Slide the sunroof forward to engage the catches in the front.
  4. Install or reposition any trim moved for access.
  5. Connect the negative battery cable.
eabcb79.jpg

Fig. 1: Exploded view of the sunroof assembly (click for zoom)




About Fuse descrtion and location, check your 1995 Volvo 960 - Owners Manual (page 155 and next).


Hope helps (remember comment and rated this help).





Jul 06, 2010 | 1995 Volvo 960

1 Answer

Sun roof won't open, but i hear the motor turning


Check for any obstruction in the rail.

Also, can check this procedure to test your components...
Power Sunroof - REMOVAL & INSTALLATION (click over pic for zoom)

Motor
See Figure 1
  1. Remove the sunroof switch panel by pushing it to the side and disengaging the pawl, then pulling it downward.
b5908ae.jpg

Fig. 1: The sunroof switch panel is retained by a metal clip
  1. Remove the sunroof switch bracket.
  2. Unplug the sunroof motor wiring harness connectors.
  3. Remove the sunroof motor mounting screws.
Disassembly of the sunroof motor is not recommended.

To install:

  1. Lightly lubricate the drive gear with grease and install the sunroof motor to the sunroof assembly.
  2. Plug in the electrical harness connectors to the sunroof motor.
  3. Operate the sunroof to verify proper operation.
  4. Install the sunroof switch bracket and the sunroof switch panel.

Sunroof
See Figures 2 and 3

abc86a3.jpg

Fig. 2: Exploded view of the sunroof assembly on 1993-94 vehicles

515e4a7.jpg

Fig. 3: Exploded view of the sunroof assembly on 1995-97 vehicles-1998 models similar
  1. Tilt up the sunroof lid.
  2. Remove the lid side trim.
  3. Remove the lid bolts and the lid assembly.
  4. Remove the rear drain mount screws and the drain.
  5. Remove the shade assembly holders from the sunroof frame.
  6. Remove the shade assembly.
  7. Remove the sunroof switch, interior accessories and headliner.
  8. Remove the switch bracket.
  9. Remove the motor assembly, spacer and clip.
  10. Remove the wind deflector mount holders from the sunroof frame.
  11. Remove the wind deflector.
  12. Disconnect the drain hose.
  13. Remove the sunroof brackets.
  14. Remove the sunroof frame assembly.
  15. Remove the link and wire assemblies.
To install:
  1. Tilt up the sunroof lid.
  2. Install the link and wire assemblies.
  3. Install the sunroof frame assembly.
  4. Install the sunroof brackets.
  5. Connect the drain hose.
  6. Install the wind deflector.
  7. Install the wind deflector mount holders on the sunroof frame.
  8. Install the motor assembly, spacer and clip.
  9. Install the switch bracket.
  10. Install the sunroof switch, interior accessories and headliner.
  11. Install the shade assembly.
  12. Install the shade assembly holders on the sunroof frame.
  13. Install the rear drain mount screws and the drain.
  14. Install the lid bolts and the lid assembly.
  15. Install the lid side trim.

Hope helps (remember rated this help).

Jun 03, 2010 | 1996 Nissan Maxima

2 Answers

Where is the fuel pressure regulator on a 99 gmc suburban 2500 7.4l v8


5.7L And 7.4L Engines
  1. Disconnect the negative battery cable.
  2. Relieve the fuel system pressure.
  3. Remove the upper manifold assembly.
    NOTE If the fuel pressure regulator is to be reinstalled, inspect the filter screen (if equipped) for contamination. If the filter screen is contaminated, replace the regulator.
  4. Disassemble the fuel pressure regulator snap ring retainer.
  5. Disassemble the regulator assembly and the O-rings.
  6. Discard the O-rings.

    0996b43f80205553.jpg Fig. Fuel pressure regulator
To install:
  1. Lubricate the new O-rings with clean engine oil.
  2. Install the backup O-ring, the large O-ring, the filter and the small O-ring.
  3. Assemble the regulator with the vacuum tube pointing down into the snap ring retainer.
  4. Install the upper manifold assembly.
  5. Connect the negative battery cable.
Good luck

Mar 02, 2010 | 1999 GMC Suburban

2 Answers

Trouble starting


Test the gas pressure regulator to see if it needs replaced. I have been having the same problem. I just had to replace the gas pressure regulator on my 98 3000GT and it is now starting just fine.

Jan 09, 2009 | 1998 Mitsubishi 3000GT

Not finding what you are looking for?
1995 Mitsubishi 3000GT Logo

139 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8195 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...