Question about 2001 Hyundai Sonata

1 Answer

Rear driver's side window is off track. i need to know how to remove the door panel to get back on track. window motor sounds like it is working in both directions 2001 hyundai sonata

Posted by on

  • Anonymous Mar 26, 2014

    Right side window won't go up ,where is fuse location for window

  • Anonymous Mar 26, 2014

    The right side passenger window goes down but won't go up the rear right side window goes down with it's own switch but not with driver side control ,but will go up with driver side
    control

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 209 Answers

Remove the upholster on the door panel. then, loosen the bolt of the window mechanism..and also the bolt of the track of the window, so you can put the window back on its track. then, you can stabilize it by looking for the right adjustment of the mechanism.

Posted on Apr 18, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Driver side window came off track


it is not off track. the grinding or metal scratching noise is from the window regulator cable that has broke off from the plastic idler pulley on regulator and is now wound up on the motor. you need a new window regulator.

Aug 31, 2014 | 2007 Toyota Avalon

1 Answer

Power window off track, motor still works


your window does not ride on a track the motor has a gear that drives a mechanism up and down. it sounds like the motor came loose.
pop the door panel and remount the motor, first pull the window all the way up. hope this helps

Dec 24, 2009 | 1997 Buick Skylark

1 Answer

The drivers side rear window does not work. It does side down, and when the power switch is press the motor turns on. could the window be off its track or does the window unit need replaced?


It sounds like the window may be off its track. All that needs to be done is to remove the inner door panel. Be careful to pry the clips very gently. They break easily. However, most auto parts stores carry replacements. Once the door panel is off, remove the plastic sheeting that covers the door frame. It's attached with a mastic adhesive.
Once you have a clear view of the window rail, carefully pull the pane up and set the glass on the track. You may need to apply some silicone in the track to keep the glass in place.

Then, test the alignment by pressing the power button and roll the window up and down. With the window closed, replace the plastic sheeting and the door panel.

That should do it.

Oct 09, 2009 | 1994 Lincoln Town Car

1 Answer

Right rear window is off the tracks. How do I remove the panel?


if the window is off track the regulator is probably bad. to remove the door panel should be a couple of screws by the inside pull handle and possibly one by the door handle itself also check the bottom of the door for any then just pull it off and lift up to clear latches and remove plastic film to get to inside of the door

Aug 30, 2009 | 2001 Oldsmobile Aurora

1 Answer

Need to remove and replace the driver side door panel


Could be a bad switch, bad window motor, or clutch in window motor, ccould also be that the window itself jumped track.

Jun 04, 2009 | 2000 Buick LeSabre

1 Answer

Drivers side window doesn't work.


This could be caused by a couple of different things. First off, when you depress the switch for the driver side window do you hear any kind of noise at all? If you are hearing a noise but it sounds like it's moving very easy, it could be the gear on the motor or the window is off track. If you are not hearing any noise at all, it may be the motor is out and will need to be replaced. These can be purchased from most auto parts store or your local chevrolet dealer parts department. The switch panel typically is held on by screws coming from underneath. You will most likely need to remove the door panel and unscrew the switch panel from the door panel once the door panel is removed from the door. While you have the panel off, you can look inside the door and make sure the motor is plugged in and also test to see if the motor is coming on when the button is depressed or if it is binded up you can hear that also.

Apr 18, 2009 | 1992 Chevrolet Corvette

1 Answer

Rear driver side power window will not work


I'm guessing you've removed the door panel since you said you removed the switch. but just in case...you'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. Then pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything.It sounds like the motor may have died you on if you cannot hear it...it could also be the regulator or linkage has broken

Apr 10, 2009 | 1999 Buick Century

1 Answer

How do I remove door panel to get to the motor ?


Ive yet seen a jeep window come off track. sounds like your window regulator is broke but hopefully im wrong. anyways, remove all the screws some have cover over them, just remove the cover and youll see some sort of screw. Then pull out and try not to breake the plastic clips that pop into door. its pretty easy once you just look at if for a min. let me know if you have anymore questions about this

Apr 07, 2009 | 2001 Jeep Grand Cherokee

1 Answer

My 2003 Forester driver side window wont work.


You need power window regulator as the cable of the regulator is out its place ,

  1. Remove the gusset cover.
  2. Pull up the inner door handle cover toward you to remove the upper hook. Pull down it to remove the lower hook. Remove the inner door handle cover.
  3. Remove the power window switch assembly.
  4. Using a trim panel remover, remove the clips of the trim panel.
  5. Remove the speaker.
  6. Using a spatula, remove the door sealer.
  7. Remove the outer mirror assembly.
  8. Remove the front end of the door weatherstrip and gusset.
  9. Remove the stabilizers.
  10. Remove the rear end of the door weatherstrip (inner and outer).
  11. Operate the power windows switch so the bolts from the regular assembly are visible through the service holes. Remove the mounting nuts.
  12. Take out the door glass. CAUTIONDo not turn the regulator in closing direction after removal of the glass. Otherwise gear may be disengaged.
  13. Loosen the nuts to remove the rear sash.
  14. Disconnect the power window motor wiring harness.
  15. Loosen the four bolts and two nuts to pull out the regulator assembly.
  16. Remove the screws to remove the motor from the regulator assembly.
  17. Installation is the reverse order of removal.0759a6d.jpg23cb1e4.jpg

Good luck...

Oct 21, 2008 | 2001 Subaru Forester

Not finding what you are looking for?
2001 Hyundai Sonata Logo

923 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...