Question about 1999 Dodge Ram

2 Answers

Installing my stereo - 1999 Dodge Ram

Posted by on

  • Nicolas Huet May 11, 2010

    infinity system stock?

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 93 Answers

Constant 12V+ Red Switched 12V+ Red/White Ground n/a Illumination n/a Dimmer Orange/White Antenna Trigger Yellow Antenna Right Front Front Speakers 6" x 9" Doors Left Front (+) Dark Green Left Front (-) Brown/Red Right Front (+) Purple Right Front (-) Dark Blue/Red Rear Speakers 5 1/4" Side Panels Left Rear (+) Brown/Yellow Left Rear (-) Brown/Light Blue Right Rear (+) Dark Blue/White Right Rear (-) Dark Blue/Orange

Posted on Dec 28, 2009

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

To install a stereo you will require to take t back to the store you bought it from or take it and the car to a auto shop and request they install it for you...

Posted on Aug 23, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Aftermarket stereo install- stereo intermittently shuts off and turns back on.


make sure all connections are tight,and that it is wired properly

Apr 01, 2015 | Cars & Trucks

1 Answer

Why van does not start after new stereo installed?


Hello,
Depending on the year your vehicle was manufactured it is most likely that when your stereo was installed they interfered in some way with your wiring related to your ignition wiring. I would recommend if you had the stereo installed professionally to call them and let them know your having the vehicle towed to their place of business and that there was no such issue prior to them installing the stereo.

Jul 31, 2014 | 2003 Chevrolet Venture Passanger

1 Answer

Installing aftermarket stereo


Should just need the New stereo and the items that come in the box with it.

Sep 06, 2013 | Acura Cars & Trucks

1 Answer

I just bought a 91 Honda accord, and the factory stereo was missing so I went out and bought the stereo installation kit also a new stereo but don't know how to mount without mounting brackets looked...


If you purchased an installation kit it should include universal mounting brackets. Perhaps you do not have an installation kit for installing your new stereo in your Accord. The kits are designed for installation of certain stereos in an Accord; not every model

Feb 24, 2013 | Cars & Trucks

2 Answers

MY DASHLIGHTS WENT OUT AND ITS NOT A FUSE. IT HAPPENED AFTER I HAD A STEREO INSTALLED ARE THJEY CONNECTED?


Who installed the stereo? A professional? Or you or a friend? Either way sounds like some wires touched something they shouldn't have! Take it back to where stereo was done and tell them to fix it.

Mar 13, 2011 | Chevrolet Monte Carlo Cars & Trucks

2 Answers

I need instructions on how to install an after market stereo in a 2006 Ford Fusion SEL.


Buy a metra dash kit and it will have step by step instructions,you will need harness too ,donot cut factory wires.!!!!!!!

Jun 03, 2010 | 2006 Ford Fusion

1 Answer

How can i replace the manufacture radio in my car and replace it with aftermarket car stereo


You best bet, because of a warranty, is to have a professional shop install your stereo. But if you are like all of us guru's here, you like to get your hands dirty.

First you need to remove the dash around your factory stereo. Be patient here and try not to break any of the dash. You may need to remove screws and pop loose plastic retainers located on the backside of the dash.

Wire the after market stereo to the harness located below by maching the colors provided. Thank the stereo companies for making this simple. Use crimp connectors or solder your connections, which ever best suits you. Tape up any remaining wires with eectrical to minimize the chance of a short.

Take the metal sleeve provided by the sereo you choose and install it into the install kit located below. Once you have removed the factory stereo, test fit the install kit and attach any tabs neccessary provided by the kit.

Now take the aftermarket stereo and place into the sleeve you installe din the install kit until it clicks into its locks. Now, the harness you wired up earlier, plug it into the factory harness and then into you stereo. Hook up the antenna, you may need to purchase a antenna adapter. Now before you install the stereo, do a test run to make sure everything is working. Once you are content that it is all working, install the new stereo and then reverse the steps in removing the dash panel and stereo.
Below are pictures of the needed hardware:
b1a0aa3.jpg

742ca2a.jpg

Sep 14, 2009 | 2003 Pontiac Vibe

1 Answer

New radio installed - now dash lights don't work


Most factory stereos are wired to the dash dimmer switch. Usually if the dash lights go out after an after market stereo installation, it is because the wire that originally went to the factory stereo is not used for after market stereos. Double check the fuses and ensure the wire that controlled the lights on the factory stereo is not grounding out on something.

Nov 11, 2008 | 1998 Honda Passport

1 Answer

Radio installation in 1983 dodge ram van


remove screws from dash face, remove dash face. two 10mm bolts hold stereo in place,remove bolts, gently pull stereo out. unplug stereo. install new stereo by reversing the directions

Oct 19, 2008 | 1983 Dodge Ram Wagon

Not finding what you are looking for?
1999 Dodge Ram Logo

Related Topics:

245 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7688 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...