Question about 1991 Pontiac Sunbird

1 Answer

Engine codes 54 1991sunbird 3.1 - 1991 Pontiac Sunbird

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 107 Answers

I think this code is defined as follows:
Fuel pump circuit fault or Mixture Control (M/C) solenoid fault or Electronic Control Module (ECM) fault/EGR solenoid #2 failure
Check your fuel pump relay as well - this could be the fault in the fuel pump circuit.
Hope this helps, Sherwin

Posted on Dec 24, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

What would that code mean in an audi. (P0318)


P0318 AUDI - Rough Road Sensor 'A' Signal Circuit Repair Importance Level: 3/3 Repair Difficulty Level: 3/3 help.jpg
xicon.jpg http://www.autocodes.com/p0318_audi.html Forum Code Possible symptoms - Engine Light ON (or Service Engine Soon Warning Light)
- Engine Misfire
- Engine Run Rough

Read more: http://www.autocodes.com/p0318_audi.html#ixzz42RmdgIwU

Mar 09, 2016 | 2003 Audi allroad

1 Answer

I'm getting no guages & no bus code on odometer. Its a 99 Cherokee sport. I put a scanner on it & it had 2 codes. I can't find them in my book or jeep forum. The codes are #1- P1698 & #2- P1694.


P1698 Jeep P1698 Jeep - ECM Fault No CCD Message From TCM Repair Importance Level: 3/3 Repair Difficulty Level: 3/3 alt="What does this mean?"> Share alt="Share on Facebook"> alt="Share on Twitter"> alt="Share on Linkedin"> alt="Share on Google Plus"> alt="AutoCodes.com"> alt="Print Version"> alt="PDF Print"> alt="Share Code"> alt="P1698 Jeep Comments"> ' Add Comment alt="Close Selection"> http://www.autocodes.com/p1698_jeep.html Forum Code Possible causes - Faulty Engine control Module (ECM)
- Engine control Module(ECM) harness is open or shorted
- Engine control Module (ECM) cicuit poor electricl connection
- Low battery voltage
alt="What does this mean?"> What does this mean? Possible symptoms - Engine Light ON (or Service Engine Soon Warning Light) P1698 Jeep Description Engine control Module (ECM) unable to communicate with Transmission Control Module (TCM)


Read more: http://www.autocodes.com/p1698_jeep.html#ixzz3trtqLzjM

Here is P1694


Code P1694

Dec 09, 2015 | Jeep Cars & Trucks

1 Answer

Diagnostic code P1290 means what? I can not find it anywhere. Please help Thank you


P1290 Ford
P1290 Ford - Cylinder Head Temperature Sensor Signal Less Than Self-Test Range

Repair Importance Level: 3/3

Repair Difficulty Level: 3/3 What does this mean?

http://engine-codes.com/p1290_ford.html

Forum Code

Possible causes

- Wrong thermostat

- Not at operating range

- Engine overheated

- Low engine coolant level

- Faulty Cylinder Head Temperature (CHT) sensor

- Cylinder Head Temperature (CHT) sensor harness is open or shorted

- Cylinder Head Temperature (CHT) sensor circuit poor electrical connection

What does this mean?

When is the code detected?

The Engine Control Module (ECM) detected the cylinder head temp below expected values

Possible symptoms

- Engine Light ON (or Service Engine Soon Warning Light)

P1290 Ford Description

The Cylinder Head Temperature (CHT) Sensor is mounted into the wall of the cylinder head and is not connected to any coolant passages. The CHT sends a signal to the Powertrain Control Module (PCM) indicating the cylinder head temperature. If the temperature exceeds 126°C (-258°F), the PCM disables four fuel injectors at a time. The PCM will alternate which four injectors are disabled every 32 engine cycles. The four cylinders that are not being fuel injected act as air pumps to aid in cooling the engine. If the temperature exceeds 154 °C (310°F), the PCM disables all of the fuel injectors until the engine temperature drops below 154°C (310°F).

Read more: http://engine-codes.com/p1290_ford.html#ixzz3iX7EnL32

Aug 11, 2015 | Cars & Trucks

1 Answer

Cylinder head torque specs for opel corsa 8valve 1.4l 2005 model


Corsa 1.4I Engine code Z14XE 2000-2004
Bolts must be renewed
stage 1. 25Nm
stage 2, + 90 degrees
stage 3. + 90 degrees
stage 4. +90 degrees
stage 5. + 45 degrees
Sequence
10 6 2 3 7
9 5 1 4 8
bolts 7 & 8 are nearest to the flywheel side of the engine
Engine code C14NZ 1993-1998
Stage 1. 25Nm
stage 2. + 60 degrees
stage 3. +60 degrees
stage 4. + 60 degrees
Sequence as above.
Corsa 1.4I Engine code Z14XE 2000-2004
Bolts must be renewed
stage 1. 25Nm
stage 2, + 90 degrees
stage 3. + 90 degrees
stage 4. +90 degrees
stage 5. + 45 degrees
Sequence
10 6 2 3 7
9 5 1 4 8
bolts 7 & 8 are nearest to the flywheel side of the engine
Engine code C14NZ 1993-1998
Stage 1. 25Nm
stage 2. + 60 degrees
stage 3. +60 degrees
stage 4. + 60 degrees
Sequence as above. <br />Corsa 1.4I Engine code Z14XE <b>2000-2004</b><br />Bolts must be renewed<br />stage 1. 25Nm<br />stage 2, + 90 degrees<br />stage 3. + 90 degrees<br />stage 4. +90 degrees<br />stage 5. + 45 degrees<br />Sequence<br />10 6 2 3 7<br />9 5 1 4 8<br />bolts 7 & 8 are nearest to the flywheel side of the engine<br />Engine code C14NZ <b>1993-1998</b><br />Stage 1. 25Nm<br />stage 2. + 60 degrees<br />stage 3. +60 degrees<br />stage 4. + 60 degrees<br />Sequence as above.

Jan 09, 2013 | Opel Corsa Cars & Trucks

1 Answer

WHAT IS DTC-01 P0673 ON A 2500 HD


OBD Code P0673refers to
The Engine Control Module (ECM) has detected a fault in the cylinder #3 glow plug circuit SymptomsPossible sumptoms of OBD code P0673
- Engine Light ON (or Service Engine Soon Warning Light) - Lack/Loss of Power - The engine may be harder to start - Engine hesitation CausesPossible causes of OBD code P0673
- Cylinder #3 glow plug circuit is open or shorted - Faulty cylinder #3 glow plug - Faulty glow plug module

Jul 09, 2011 | GMC Sierra 2500HD Cars & Trucks

2 Answers

Error codes for 1991 dodge spirit


Turn the key to run then off, back to run, then off, then to run and leave it on. The check engine light will be on and will then go off and then on again according to the codes the engine controler happens to have in it. If the check engine light was on when you stopped the car, then there is at least one code in the controler. The light will blink the codes like this.
Cycle the key three times and leave on on the third time. light on for about 3-4 seconds then goes out for about 2 seconds and then blinks one time and goes out for 3 seconds this is for the no.1. Then the light blinks 3 times and goes out for about 3-4 seconds. You have the code 13. You could have a whole string of codes in the controler memory. It could be something like this. key cycled 3 times, light on for 3-4 seconds, then blinks 1 time, pause, 3 times, longer pause, 2 times ,pause 4 times, longer pause, then 5 times, pause 5 times the goes out.
This is code ; 13,24, 55. code 55 isn't really a code. It just tells you it's the end of any codes the controller has.
If you disconnect the battery and hook it back, you will have code 13 which simply mean 'battery disconnect'. It will errace it's self after several starts if it's not disconnected again. If you cycle the key and you get 55, this means there are no codes recorded at this time.
You will allways get 55 when checking for codes wheather there are fault codes or not. The light on for a few second before the codes start flashing is only a bulb check. Some codes like 13 will not turn the check engine on, but but will leave a code for diagnostic purposes only. If you have the check engine light on and accellerate and the light begains to blink, then the controller is telling you that you have an engine miss and are running the chance of burning out you're catalatic converter if you continue driving. Sometimes its advised to disconnect the battery after you have recorded the codes.
This will erase all codes that are present but were generated by conditions that aren't pertanent to the present condition. and then the codes that come back are the real ones to address.
This link: http://minimopar.knizefamily.net/fault/index.html
Contains the entire list of Chrysler Engine Error Codes.


Mar 03, 2011 | 1991 Dodge Spirit

3 Answers

Diagnostic codes p1505 p1507 ran stalled wont run turns over fine


sorry but their are no diadnostic codes with this number in the manufacturers codes i have
P0505....Idle Control System
P0507....Idle Control System RPM Higher Than Expected
but i have found these generic codes for you if they help

Aug 10, 2010 | 2003 Hyundai Tiburon

1 Answer

Check Engine light with an Err 3 on the radio.


err 3 is not an engine system fault code, a tyupical code looks like this P0420, this happens to be a evaporative emission system fault code.

Jan 08, 2010 | 1997 Acura CL

1 Answer

Where is the timing marks on a 1991 geo pirzm? also what is the firing order?


97488ae.gif
1.6L SOHC (VIN Code 4) EngineEngine Firing Order 1-3-4-2Distributor Rotation: Counterclockwise

0be98bd.gif
1.6L DOHC (All 1988 & 1991-92 VIN Code 5)Engine Firing Order 1-3-4-2Distributor Rotation: Clockwise

eabc610.gif
1.6L DOHC (1990 VIN Code 5, 1989-93 VIN Code 6 & 1993 VIN Code 8)Engine Firing Order 1-3-4-2Distributor Rotation: Clockwise


ec1d0cd.gif

Dec 01, 2009 | 1991 Geo Prizm

1 Answer

Check engine codes


1-2-3* Signal missing to/from coolant temp. sensor Wiring fault to or in ECT sensor;grounds corroded on intake manifold or engine Difficult to start engine when cold Same Same

Dec 23, 2008 | 1994 Volvo 940

Not finding what you are looking for?
1991 Pontiac Sunbird Logo

Related Topics:

120 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...