Question about 2001 Lincoln LS

1 Answer

How to change map light bulb in lincoln ls 2001

I cannot pull down map light to change the bulb. I'm afraid to brake that plastic housing.

Posted by on

  • gerry bissi May 11, 2010





    417-02: Interior Lighting

    2001 Lincoln LS Workshop Manual
    REMOVAL AND INSTALLATION


    Lamp Assembly —Front Map

    Removal and Installation


    NOTE: The front map lamp assembly is an integral part of the headliner. This does not include the front map lamp lens and bulbs.



    I suspect the lens pulls down for bulb access.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 31 Answers

Dont be a fraid you can replace it, get a thin screw driver or a razor

Posted on Aug 08, 2009

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 29 Answers

SOURCE: lINCOLN ls bRAKE lIGHT REPLACEMENT

One of 2 ways.......

#1) mounting screws on the exterior of the brake light lens.

#2) in the trunk behind the carpeting, usually this is the easiest way. either way the bulb is held in by a twist lock bulb holder.

GGBMDB

Posted on Nov 30, 2008

mcgyver468
  • 710 Answers

SOURCE: where is the port where you put freon in on a 2001 lincoln ls?

it is the one that is blue in color and has an L on it for low pressure. The vapor line is also called the suction line. If your confused, then choose the larger of the two lines near the accumulator.

Posted on Apr 23, 2009

  • 1 Answer

SOURCE: where do i recharge ac on a 2001 lincoln ls we only found i line

You Can locate it beside the compresor underneath the car on the driver side

Posted on Jun 26, 2009

SOURCE: how to remove the dome or map light on a 2001 lincoln ls

It snaps in place
There will be two places on each side, you need to push on,while pulling down. It is called an overhead console
Your best bet,is to fabricate a plastic tool,like a plastic putty knife, to use .
Every thing on the LS seems to snap together The challange is to figure it out,without breaking something

Posted on May 08, 2010

SOURCE: where is fuse box located on 2001 lincoln ls...

You have fuses and relays-

Under the hood.pass side,front,next to washer bottle and ABS motor

On the right side kick panel,under glove box. Have to remove cover

In trunk,lift cover,left of battery.

Posted on May 23, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the brake bulb 2002 lincoln ls


The brake bulb is located in the tail light assembly. Pull the trunk liner back slightly and there should be 2-4 bolts holding the tail light assembly to the body. undo these and the whole thing should pull out.

May 05, 2014 | 2002 Lincoln LS

1 Answer

How to change high mount brake light bulb in a 2002 lincoln navigator


Instructions
    • 1 Open one of the rear doorsicon1.png of the LS. Position yourself on your knees in the back seat, facing the rear deck or rear dash.
    • 2 Remove the cover from the high-mount brakeicon1.png light assembly, by hand. Pull the cover toward the front of the vehicle. Do not pull extremely hard, or you will break the clips that mount through the deck from the trunk.
    • 3 Pull the old light bulbsicon1.png out of the high-mount assembly. Wrap the new bulbs in a paper tower prior to picking them up. Insert new bulbs into the assembly, by hand. Do not touch the bulb lenses with your hands directly.
    • 4 Install the high-mount cover onto the rear deck and push the cover toward the rear glass to lock it in place.


Read more: http://www.ehow.com/how_10060583_replace-upper-brake-bulb-2001-lincoln-ls.html#ixzz30cNQ559F

May 03, 2014 | Cars & Trucks

1 Answer

Replace rear brake light 2002 lincoln ls


Open Trunk

Pull back trunk liner

Remove 3 nuts holding
tail light housing on

Pull housing away from body & replace bulb

Apr 29, 2011 | 2002 Lincoln LS

1 Answer

How do I replace the turn signal bulb for a lincoln ls? I see where the bulb is but cant get to it


On the front-- you remove the lamp assy
2 screws on top, under the plastic rad cover
1 down really low in back of lamp housing

On the back--- you remove 3 nuts in trunk, and the tail light housing

Mar 19, 2011 | 2000 Lincoln LS

1 Answer

How do i change brake light bulb on 2005 lincoln ls?


Remove 3 nuts, inside the trunk

Pull lamp housing away from body

Do not use any bulb made in China, or
you will be back there in a few months

Dec 09, 2010 | Lincoln LS Cars & Trucks

1 Answer

How do you get to the left brake light bulb to change it?


Open trunk,pull trunk interior/liner away from back left corner
Remove three nuts, that hold tail light housing
Remove housing and replace burnt out lamp
They use an extended duty lamp/bulb,you may not find that
I add, that most China Made bulbs, don't last a year. So look for a Wagner, made in Mexico,France etc

Oct 22, 2010 | 2005 Lincoln LS

1 Answer

How do you change the light bulb in the rear window


I'm not real sure, since it's been so long since I've replaced the one in my LS..but if I remember correctly, the trick was to push down on the plastic cover and slide it forward.

Oct 21, 2010 | 2001 Lincoln LS

1 Answer

How to remove the dome or map light on a 2001 lincoln ls


It snaps in place
There will be two places on each side, you need to push on,while pulling down. It is called an overhead console
Your best bet,is to fabricate a plastic tool,like a plastic putty knife, to use .
Every thing on the LS seems to snap together The challange is to figure it out,without breaking something

May 08, 2010 | 2001 Lincoln LS

1 Answer

Replace rear brake light bulb 1998 lincoln continental


pop the trunk and right behind where the lights are pull the carpet down and their will be of the following depending on the trim.

You will either see the light sockets themselves that you can twist and pull to change the bulb, or you will see the plastic nuts/screws that you can remove to remove the entire assembly in order to access the bulbs.

If it's your 3rd brake light, the screws to access the housing are located in the upper part of the trunk

Oct 26, 2009 | 1997 Lincoln Continental

1 Answer

Toni Here - I have 2000 Lincoln LS - 5 speed - the brake light in the back rear window - cyclops light is not working - how do I replace that bulb please?


Firmly press down on the brake light cover. Press down into the rear deck. This will release the bezel from the teeth on the metal housing. Now slide it forward ( toward the front of the car) while holding it firmly pressed down into the rear deck. Once removed you will see how the metal teeth on the bottom of the metal housing bracket bit into the plastic bezel.

Oct 21, 2009 | 2000 Lincoln LS

Not finding what you are looking for?
2001 Lincoln LS Logo

Related Topics:

537 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lincoln Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

fordexpert

Level 3 Expert

5474 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Lincoln Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...