Question about 2001 Chrysler Voyager

1 Answer

MY VOYAGER IMMOBILISER SEEMS TO HAVE KICKED IN CANT GET IT STARTED IS THERE AN ELECTRICAL RESET SWITCH ON THE VEHICLE? TRIED THE SECOND KEY FOB BUT NO JOY DOES ANYBODY HAVE ANY IDEAS?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 57 Answers

Its likely to be the 21 pin plug behind the heater control panel. Remove the long plastic strip under the control panel (prise of gently, held on by 2 clips) remove 2 screws behind this and 2 screws above on panel. The whole lot should easily come away. There will be 3 plugs, remove all three and try to start the car. If it starts your problem would be the earth. Hope it helps.

Posted on Aug 15, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need to program a second key fob for my 08 mazda 6 with a flip out key fob


There may be alternate ways to do this but although it is expensive , it is best to take the vehicle and the new key to a service dealer centre and have the programming done properly so that the immobiliser and other operated equipment are all programmed together correctly.

Dec 16, 2014 | Mazda Cars & Trucks

3 Answers

How can you bypass an antitheft system on a 2002 tdi jetta?


If it is not a new key fob, it sounds to me like the immobilizer is activated. So, all the lights on the dash are working now? Is there a flashing key on the dash lights? One of the resets that works is put the key fob in, and turn ignition on without starting it, and leave it 15 minutes. And try again.

Jul 25, 2014 | 2002 Volkswagen Jetta TDI

2 Answers

How do i reset immobiliser on hyundai coupe


I have key but not the button fob car won't kick over

Nov 13, 2011 | Cars & Trucks

1 Answer

I left my car garaged over the very cold winter. When I eventually tried to start the vehicle the infra red key fob would not open the central locking to disarm the immobiliser. There was also no power...


depending on the type of security system, it is sometimes necessary to re-sync the keyfob to the car after a flat battery on the car or the fob.
this is normally just a matter of turning the key to the IGN position and pressing the button on the key fob. you may have to hold the button for a second or two but this will normally re-sync the system.

if it does not work then you will have to sent more detailed information on the security system. ie factory fitted or aftermarket system with make and type (normally found on the siren unit under the bonnet.

hope this helps

Mar 14, 2011 | Honda Prelude Cars & Trucks

1 Answer

Key fob alarm problem golf vr6


the immobiliser needs to be programed with diagnostic equipment

May 23, 2010 | 1997 Volkswagen Golf

1 Answer

Kia carens 2000 diesel immobiliser problem


The mechanic that you talked to was exactly right

Jan 23, 2010 | 2003 Kia Sedona

1 Answer

2008 Hyundai i30. 2.0 litre petrol. (Elantra selected, since I believe i30 is same basic engine system as the Elantra, and i30 is not a provided option for my model on this forum). Car won't start. Engine...


Interesting problem.. since not US spec. Is there a 'remote keyless (fob)' programmed for this vehicle? That's the only way to DE-arm the immobilizer (anti-theft) feature (based on US specs). Unless you have this key fob (keyless entry remote... which must also be programmed for this vehicle), the only other way is wait 5 minutes with the existing key in the ignition, then it should start (US specs). You will still need to have an 'ACTIVE' keyless remote programmed for this vehicle... otherwise, you'll continue to run into this problem.

Apr 18, 2009 | 2008 Hyundai Elantra

1 Answer

2004 mark 5 golf gt tdi non starter


sounds like an immobiliser issue, maybe the anti-theft kicked in, maybe the key wasnt programmed correctly

Jan 24, 2009 | 2004 Volkswagen Golf

Not finding what you are looking for?
2001 Chrysler Voyager Logo

1,508 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7688 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...