Question about 2006 Fiat 124

2 Answers

Fitting a wing mirror on the passenger side of a fiat punto

How to fit a replacement mirror on the passenger side of a fiat punto. how do i take the old one off and how to put the replacement one on.

Posted by on

  • Anonymous Mar 23, 2014

    have to open and close locks from passenger side. Drivers side electic window won't work

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,986 Answers

On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door

Posted on Sep 29, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Electric passengers window goes down not up fiat punto

Posted on Feb 05, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I've got 2006 fiat grande Punto nothing on my passenger side works Window Mirror Speaker Any one know what the prob could be


There is a rubber boot between the door and body. Most likely the wires are broken there.

Jul 19, 2015 | Fiat Cars & Trucks

1 Answer

How do you remove the passenger side rear door panel in a 2006 Fiat Punto


1 Prise out the trim cap and undo the screw securing the exterior mirror inner trim panel of door
2 Where a manually-adjustable exterior mirror is fitted, prise the rubber cover off the adjustment lever, then unscrew and remove the locking collar using pointed-nose pliers.
3 Pull the panel from its location to disengage the retaining clips. Disconnect the loudspeaker wiring connector and remove the panel.
4 Lift off the trim caps, undo the retaining screws, then remove the door interior handle surround.
5 Carefully prise off the loudspeaker grille then undo the three loudspeaker retaining screws. Withdraw the speaker from the door and disconnect the wiring connectors.
6 Undo the three retaining screws in the loudspeaker aperture, and the single screw in the oddments pocket just below the aperture.
7 Lift out the loudspeaker protective cover and withdraw the loudspeaker wiring from the base of the cover.
8 Prise out the trim cap and undo the screw securing the rear of the trim panel to the door frame of Fiat Punto car.
9 Undo the screw at the upper front corner of the panel, and the remaining four screws securing the lower edge of the panel to the door frame.
10 Using a suitable forked tool inserted between the door and the trim panel of Fiat Punto, release the press-stud clips located around the edge of the panel, then lift the trim panel upward.
11 Pull the panel from the door, noting that the lower window aperture weatherstrip is integral with the trim panel and must be released from tie door as the panel is withdrawn.
12 If work is to be carried out on the door internal components, it will be necessary to remove the plastic sealing sheet from the inside of the door. Start at one comer of the sheet and carefully peel it away, using a sharp blade to split the sealant bead, if necessary.
13 Store the detached sealing sheet such that it cannot become contaminated with dust; this will allow it to be re-used later.
Source (with illustrations) - Door inner trim panel removal and refitting FIAT Punto
11_26_2014_6_35_50_pm.jpg

Feb 22, 2013 | Fiat Grande Cars & Trucks

1 Answer

Replacing electric wing-mirror


remove the interior trim cover and three torq headed screws ,simple job

Feb 12, 2013 | 2007 Fiat Grande Punto

1 Answer

Fiat croma - passenger door electrics


Have you checked the rockers they could be burned out, or it could be a fuse problem.

Apr 24, 2012 | 2006 Fiat Croma 2.2

2 Answers

Fitting fiat doblo wing mirror


wing mirror or door mirror is held on by three screws on the inside of the door behind the triangular piece of trim which just pulls off

Nov 29, 2010 | 2011 Fiat 500

1 Answer

Passenger side wiper stopes working linkage arm keeps coming of spline. its on a fiat punto 54 plate.


I had this problem about 18 months ago. I took it to a garage and was advised that the entire wiper motor and linkage arms needed to be replaced quoting approx. £175.00. Instead I took it home, took it all apart and found a washer that was slightly too small to fit on the end of the ball, hit it hard with a hammer thus jamming it on. It hasn't come off once since. Total cost approx. £0.30 and 30 minutes of my own time...

Feb 28, 2010 | 2006 Fiat 124

1 Answer

Replace drivers wing mirror glass on mk 1 punto


Most full service Auto Parts stores have replacement mirrors on the shelf. They can also instruct you on the repair.

Thanks for your quesiton at FixYa.com

Jan 15, 2010 | 2007 Fiat Pininfarina

2 Answers

Cant find the horn on a fiat punto elx


the horn is situated behind the inner wheel arch at the front of the car on the passenger side wing

Jul 04, 2009 | Fiat 124 Cars & Trucks

3 Answers

Replacing the wing mirror on an audi A4


TO FIT A NEW MIRROR FIRST CONNECT THE WIRING PLUGS THEN ENSURE THE FRICTION PIN ON THE BACK OF MIRROR ENGAGES IN THE SLOT (OUTER EDGE OF MIRROR) PRESS FIRMLY AT THE CENTRE OF THE MIRROR TO ENGAGE THE RETAINING CLIP....IF YOU NEED TO REMOVE MIRROR INSERT A FLAT TOOL BEHIND THE LOWER EDGE AND LEVER IT FROM THE CLIPS.. HOPE I WAS OF SOME HELP TO YOU...

Nov 20, 2008 | 2004 Audi A4

1 Answer

Fiat punto


You can replace the gaitors and track rod ends. On older racks you could fit shims to the rack to tighten up the free play. However on modern racks you need to take of the rack to recondition it. Sorry I could not be of more help.

Oct 14, 2008 | Fiat X1/9 Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

3,500 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fiat Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Fiat Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...