Question about 2004 Nissan Sentra

1 Answer

1992 Ford Bronco tail, and dash lights not working, why?

I have a 1992 Ford Bronco and the tail lights, and dash lights aren't working what could this be?

Posted by on

  • hellfireadm Apr 18, 2009

    I have already check the fuses and two were bad so i replaced them, but i have yet to check the bulbs but i will do that, thank you.

×

1 Answer

Sounds like the fuse...check all of your fuse under and around the drivers side dash...it could also be the light bulbs are burnt out...pull the bulbs out and check to see if they are blackend

Posted on Apr 18, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have 89 bronco 2 my brake lights turn signals both work my tail lights don't work have check fuse n blubs what might be the problem


The turn signals and brake lights use the same circuit and filament in the bulbs. The tail lights are on the other circuit which comes from the headlight switch.
Do you have power on the tail light fuse ?

Feb 25, 2013 | 1987 Ford Bronco II

1 Answer

Tail lights and dash board lights aren't working on a 1998 nissan pathfinder


Replace the fuse they should be on the same circuit, ever tow anything?

Jan 12, 2013 | 1998 Nissan Pathfinder

1 Answer

I just picked up a 87 Bronco II. The tail lights don't work. Brake and turn signal lights and head lights work fine. Could it be a fuse. and where is the box located and where can I get a diagram of the...


I have an 86. Under the dash on drivers side are two 1/4 turn black knobs that release a cover over the fuse panel. There is a diagram on the inside.

Jan 10, 2011 | 1987 Ford Bronco II

1 Answer

1986 Ford Bronco Dash/Instrument Light Problem


"painless wiring kit" maybe available for your application. sometimes not so "painless" though

Apr 11, 2010 | 1986 Ford Bronco

1 Answer

Dash lights do not work, is it a fuse? And if so, wich one?


The dash lights and tail lights are usually on the same fuse, look for the tail light fuse. You may want check the wiring at the rear of the vehicle, especially trailer light wires. If your truck has one of those add in connectors for trailer lights, that you plug into the wire harness, you may want to take that apart. They sometimes get corroded and short out.

Jan 03, 2010 | 1988 Ford Bronco II

1 Answer

Rear Window Malfunction on my 1993 Eddie Bauer Bronco I have a rear window problem on my 1993 Eddie Bauer Bronco. I rolled my rear window up last night with the rear key switch. Today it will not roll...


The dash switch can affect the operation of the rear key switch. 1st thing to do is replace the dash switch and that will prob fix it all.

Nov 16, 2009 | 1992 Ford Bronco

1 Answer

1979 Ford Bronco 400M engine. Tail lights work but brake lights and turn signal lights do not work. The right signal light on the dashboard stays lit all the time. Is it probably my turn signal switch, a...


The brake light and the turn signal are the same bulb. Most of the time if the bulb on the dash stays on it is because a bulb is blown and thats the way it tells you.

Oct 29, 2009 | 1984 Ford Bronco

1 Answer

Hello have a 1984 ford bronco 2


when my tail lights and dash lights w out my hookup for trailer lights were grounding each other out causing my fuse to blow for my tail lights and dash. i would check all your wiring and make sure nothing is touching or bare.

Mar 06, 2009 | 1984 Ford Bronco II

1 Answer

Tail light not workin


can only really be the wiring with what you have told me? if you take an voltage meter and check for voltage. if nothing then maybe a quick look at the lighting tracks on the unit itself.

Feb 25, 2009 | 1993 Ford Bronco

Not finding what you are looking for?
2004 Nissan Sentra Logo

265 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...