Question about 1979 Pontiac Firebird

Open Question

1987 Pontiac Firebird electric speedometer and digital gauges

I have an 87 Firebird that was a 302 fuel injected and the previous owner converted to a 350 carbureted the speedometer is eletric and the gauges are digital and the speedometer isnt working. Was told there are pink colored wires in the computer harness not connected to the engine harness cant find anything like this. Does anyone have diagrams that don't cost money or any help with this would be grealy appreciated thanks!

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

nightwolf364
  • 48 Answers

SOURCE: 87 bronco 2 fuel injecter harness

Nope... they only inject fuel during the compression stroke of the engine. Thats how they were designed.

Posted on Jan 22, 2009

  • 202 Answers

SOURCE: 87 firebird fuel pump

Remove the exhaust, drop the rear end, remove the fuel cap, and surrounding rubber flange. remove the two hanger straps (be sure to have fuel tank supported so it doesn't just fall out. Remove hoses/electrical connector. Pull tank out, and remove metal lock ring that holds fuel pump assembly in place. Remove fuel pump assembly. Installation is reverse of removal. I have had 7 of these cars, and am currently driving one now. If you have any other questions about it, please ask!

Posted on Mar 27, 2009

  • 82 Answers

SOURCE: 87 regal ignition switch wiring diagram

Thick wires at IGN SW .... Red(s) - supply power from the battery to the IGN switch ... Pink - ignition supply ... Orange - Accessory power ... Purple most RWD sometimes (Yellow most FWD) - Starter .. Did I miss any? It's been a while The thin wires on the IGN swich are for key sense and VATS (if applicable)

Posted on May 08, 2009

  • 170 Answers

SOURCE: 1987 ford 302 FUEL INJECTION NO FIRE

Here's a trouble shooting check list. http://www.stangnet.com/mustang-forums/6161267-post.html

Posted on Sep 02, 2009

ddc3
  • 144 Answers

SOURCE: 1987 pontiac firebird, does anyone know how to fix dash lights.?

you have to take out the gauges, they will be on the back. In some cases you have to take apart most of the dash to get the instrument panel out, sometimes you can just take the trim off the instrument panel. I had to take apart most of my dash in my 86.

Posted on Jan 25, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

On my 1987 firebird 2.8 I loose fuel pressure


posible fuel pump relay is not prime the system

Oct 15, 2014 | 1987 Pontiac Firebird

1 Answer

How can i change my 87 bronco II 2.9 L from fuel injected to carbureted ?


You'll need three things to get this done: An independent distributor that doesn't require a vehicle computer, and intake manifold with a bolt pattern that'll work with a carburetor, and a carburetor. Oh, and a low-pressure fuel pump (the high-pressure one in the tank has to GO). You'll have to figure out the gauge cluster or replace all the gauges that rely on the computer.

The swap itself is shockingly easy, once you have those three parts. It's all bolt-together, and suddenly your vehicle just got a LOT simpler and more intuitive to work on. The intake might be a little hard to find, unless that block was available in earlier years with a carburetor (in which case it's a shoo-in)... but even if you can't find an earlier intake, it may not be too hard to make an adapter plate that'd fit the carb.

You'll need to deal with connecting the low-pressure fuel pump to that tank. One approach is to take the high-pressure pump out of the tank, rip its guts out, and use it as a big pickup tube for the external low-pressure pump.

Me, I love carbureted vehicles. I'd rather have carbureted than injected ANY day.

Aug 01, 2014 | 1987 Ford Bronco II

1 Answer

My 1998 firebird won't start. It acts like it's not getting enough gas to start it.


check the fuel pressure with a fuel pressure gauge, u can by or rent from parts store. and find out what it should at p.s.i.
when u trn key on do u hear the pump come on?

Dec 15, 2012 | 1998 Pontiac Firebird

1 Answer

1985 mustang 3.8 engine running way too rich


This an '85 Mustang with a 3.8 L v-6? Thought they only had the carbureted 4 cylinder , and a 302 v-8, possibly throttle body injected?

Check air delivery system, check timing, any trouble codes?

Dec 01, 2012 | Cars & Trucks

1 Answer

I have an 87 f350 with a 460 motor i want to swap the cab from a 1993 f150 with an inline six cyl how do i wire the coil, and starter up ??


your going to run into more hurdles than just the starter and coil.however the starter you can wire the cellinoid to the ignition and just run a power lead to your battery. the coil you can easily run to a standalone ignition system such as an msd or mallory setup. you may want to look into a painless wireing harness, you can find them online, they can make you anything you need and it will be a plug and play setup, no head scratching needed. and the underhood will look clean rather than a rats nest of unused wires and random wires running here and there.

Feb 12, 2012 | 1987 Ford F 350

1 Answer

Where is the fuel filter located on a Chevy Mark 3 Van 350 motor/20


If it is fuel injected, it is an inline filter found underneath, along the frame rail. If it is carbureted, it is screwed in the carburetor where the fuel line enters it (intake fuel filter nut)

Sep 02, 2011 | 1993 Chevrolet G20

1 Answer

Got an '87 firebird that has been pieced together, looks like 5.7L T.P.I. engine. How can I identify what motor it is for sure? thanks


Look at the fuel injector cover if its fuel injected on top most say it there, it will say 2.8L or 5.7L if it is a v6 (6 spark plug wires) chances are its a 2.8 if it has V8 (8 spark plug wires) more likely to be a 5.7. Check your ECM if its what came with that motor if it is the original GM part the number on it should be 1227165 if it is it should be 5.0 or 5.7 more likely the 5.7.

Dec 13, 2010 | 1987 Pontiac Firebird

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

428 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8211 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...