Question about 1993 Dodge Intrepid

1 Answer

Gear stick stuck in neutral

I was backing into my spot at home and the gear stick got stuck and wouldnt depress....it will only move to drive and neutral now....it cut off but i had to put on the parking brake for it to not move....what can i do to make the button on the stick come back out?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 718 Answers

You will have to take the top of the handle off to replace the button spring.

Posted on Apr 18, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1996 Isuzu hombre 2.2 manual trans is stuck in gear have removed the stick and put it in neutral and still stuck and stalls when clutch is let out


so , it seems the engine does start in gear, with clutch depressed.
or cranks , brakes off, and car does not move. with clutch depressed, if yes, then the clutch is not 100% seized.
we now know the trans is in neutral (could be siezed check its Gear lub levels?)

I can not decode, stuck in gear. elaborate that.
nor "
"still stuck"
the only clue here, is
"stalls when clutch is let out."

this last statement makes me presume you depressed the clutch
then turn the key to start, it started
and when you let the clutch out, the engine stalls
does it do that rear wheels (2wd mode) ? lift driving wheels off the ground.... (these proves engine not weak)
yes, transmission is sized.
no, then it is stuck in gear.

Nov 26, 2016 | 1996 Isuzu Hombre

3 Answers

Stuck in neutral


If you can select gears then it is not stuck in neutral. To be stuck in neutral means that you can only move the lever sideways and no where else. Now the problem is probably the clutch is in constant disengaged position This is from a hydraulic lock in the system from a faulty master cylinder/ jammed cable. As 4 gear is a straight through gear( Input shaft is connected directly to out put shaft) then the 2 causes for this --one not properly engaged and 2 loose or misaligned gear box bolts at the bell housing. So check hydraulics system/ cable and check that the gear box is not loose

Nov 29, 2013 | Toyota Tacoma Cars & Trucks

1 Answer

My gear stick wouldnt go back to neutral it stuck in reverse. it is quite hard to change gear any way


check teh linkage ,these cars do have a sloppy gear lever movement anyway but i think yours is rusted up or the nylon bushes are worn out ,try soaking all moving parts with a squirt from oil can containing engine oil and not that spray can stuff

Nov 27, 2010 | Kia Sedona Cars & Trucks

1 Answer

Car won't go into gear properly


it could be a few things bent shifting fork or first gear is out reverse runs off an idler that is conected to first gear.

Jun 05, 2009 | 1999 Nissan Altima

1 Answer

Nissan 1999 Altima won't go into gear properly


howdy,you need a clutch..thats for sure,101%

Jun 05, 2009 | 1999 Nissan Altima

1 Answer

Gear stuck in neutral


check linkage bars from shifter to transmission you will find 2 of them generally what happens is that the ball or pivot gets worn and ends up falling off.

Jan 20, 2009 | 2000 Suzuki Vitara

2 Answers

1996 Geo Metro Clutch won't disengage


Hi,

In all likelihood two (2) possibilities:
  • defective clutch cable (most likely); and/or
  • defective clutch fork (least likely).
Should it be the cable, this might be of help. It is turns out to be the fork, you might need the services of a qualified professional or a dealership.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information. Good luck and kind regards. Thank you for using FixYa.

Nov 10, 2008 | 1996 Geo Metro

Not finding what you are looking for?
1993 Dodge Intrepid Logo

Related Topics:

293 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...