Question about 1996 Nissan Maxima

1 Answer

Faulty egr valve

I have a problem with my egr valve it doesn't open, it opens for like 2 seconds when i first step on the gas then it closes even though the engine is revving at 4000 rpm is this normal.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 82 Answers

Hey there..well the egr valve is not suppose to be open for too long as it can create a very lean mixture and damage your engine,,is your light comen on,,,,by the way try cleaning it if you can to remove the carbon build up thats what actually causes malfuntion,,,

Posted on Apr 24, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I correct high idle problem


Year/make/model??? Applying vacuum to the EGR and making the valve open will not be the correction. Once opened, this valve allows unburned exhaust gas back into the combustion chamber resulting in a rich mixture. The computer sees this rich mixture and reduces the injector pulse allowing the idle to slightly lower. If the vehicle were at proper idle speed and this valve is opened, it would run rough snd possibly stall

Jan 20, 2016 | Cars & Trucks

1 Answer

E404 error code?


P0404 Dodge - Exhaust Gas Recirculation Position Sensor Performance Early Exhaust Gas Recirculation (EGR) systems component s include and EGR Valve, and Engine Control ?odule (EC?) Controlled Vacuum Switch Valve or EGR Solenoid and an EGR Vacuum ?odulator. Depending on the engine and driving conditions, the EC? will control the EGR Solenoid which will operate the EGR Vacuum ?odulator to regulate the opening and closing of the EGR Valve.
The EGR system on recently built vehicles uses a step motor to control the flow rate of EGR from exhaust manifold. This motor has four winding phases. It operates according to the output pulse signal of the EC?. Two windings are turned ON and OFF in sequence. Each time an ON pulse is issued, the valve opens or closes, changing the flow rate. When no change in the flow rate is needed, the EC? does not issue the pulse signal. ? certain voltage signal is issued so that the valve remains at that particular opening.

Jul 04, 2014 | 2006 Dodge Grand Caravan

1 Answer

I am getting OBD-II trouble code P0404 on my 2001 Chevy Malibu, and want to know, what I can do to correct that?


Here is the website I use for OBDII codes:
http://www.obd-codes.com/trouble_codes/

And it says:
P0404 - Exhaust Gas Recirculation Circuit Range/Performance OBD-II Trouble Code Technical Description

Exhaust Gas Recirculation Circuit Range/Performance
What does that mean?

The EGR (Exhaust Gas Recirculation) system's purpose is to redirect exhaust gas back into the cylinders. Since exhaust gas is inert, it displaces oxygen and fuel, thereby lowering cylinder temps, which, in turn, lowers oxides of nitrogen emissions. For that reason it needs to be carefully metered into the cylinders (via the EGR valve) so as not to adversely affect the engine's performance. (Too much EGR and the engine won't idle).
FB.init("dd7d9e9681341cde77587bc6a2029f6f"); OBD-Codes.com on Facebook

If you have a P0404, then the EGR valve is likely an electrically controlled EGR valve instead of a vacuum controlled EGR valve. Also, the valve will usually have a feedback system built into it that informs the PCM (Powertrain Control Module) what position the valve is in; open, closed, or somewhere in between. The PCM needs to know this to determine whether or not the valve is operating as needed. If the PCM determines that the valve should be operating, but the feedback circuit shows that the valve is not open, this code will set. Or if the PCM determines the valve should be closed but the feedback signal indicates that the valve is open, this code will set.
Symptoms

There may be no symptoms of a P0404 DTC other than the MIL (malfunction indicator lamp) or check engine light. However, Exhaust Gas Recirculation systems are inherently problematic due to carbon buildup in the intake manifold, etc. This normal buildup can lodge in an EGR valve, holding it open when it should be closed. If this is the case, the engine may idle rough, or not at all. If the valve has failed and is NOT opening, then symptoms would be higher combustion temps and as a result, higher Nox emissions. But the latter symptoms aren't going to be noticeable to a driver.
Causes

Usually this code points to either carbon buildup or a bad EGR valve. However that doesn't rule out the following:

  • Open or short in the 5 Volt reference circuit
  • Open or short in the ground circuit
  • Open or short in the PCM controlled voltage circuit
  • Bad PCM (less likely)
Possible Solutions
  1. Using a scan tool command the EGR valve to open while watching the actual EGR position (it will probably be labeled "desired EGR" or something similar). The actual EGR position should be very close to the "desired" EGR position. If it is, then the problem is likely intermittent. It may have been a lodged piece of carbon that has since dislodged, or it could be a bad EGR valve winding that intermittently opens or shorts as the valve temperature changes.
  2. If the EGR "desired" position is not close to the "actual" position, then unplug the EGR sensor. Check for a good 5 Volt reference voltage to the connector. If it doesn't show a reference voltage, repair an open or short in the 5 Volt reference circuit.
  3. If there is a 5 volt reference voltage, activate the EGR with the scanner, monitor the EGR ground circuit with a DVOM (Digital Volt/Ohm meter). It should indicate a good ground. If it doesn't then repair the ground circuit.
  4. If there is a good ground, then check the control circuit. It should indicate voltage that varies according to the percentage that the EGR is open. As it's open more, the voltage should increase accordingly. If it does, then replace the EGR valve.
  5. If the voltage doesn't increase incrementally, then repair open or short in EGR control circuit.

Aug 07, 2011 | 2001 Chevrolet Malibu

1 Answer

What is a p0404 code


P0404 - Exhaust Gas Recirculation Circuit Range/Performance
The EGR (Exhaust Gas Recirculation) system's purpose is to redirect exhaust gas back into the cylinders. Since exhaust gas is inert, it displaces oxygen and fuel, thereby lowering cylinder temps, which, in turn, lowers oxides of nitrogen emissions. For that reason it needs to be carefully metered into the cylinders (via the EGR valve) so as not to adversely affect the engine's performance. (Too much EGR and the engine won't idle).

If you have a P0404, then the EGR valve is likely an electrically controlled EGR valve instead of a vacuum controlled EGR valve. Also, the valve will usually have a feedback system built into it that informs the PCM (Powertrain Control Module) what position the valve is in; open, closed, or somewhere in between. The PCM needs to know this to determine whether or not the valve is operating as needed. If the PCM determines that the valve should be operating, but the feedback circuit shows that the valve is not open, this code will set. Or if the PCM determines the valve should be closed but the feedback signal indicates that the valve is open, this code will set.

Symptoms: There may be no symptoms of a P0404 DTC other than the MIL (malfunction indicator lamp) or check engine light. However, Exhaust Gas Recirculation systems are inherently problematic due to carbon buildup in the intake manifold, etc. This normal buildup can lodge in an EGR valve, holding it open when it should be closed. If this is the case, the engine may idle rough, or not at all. If the valve has failed and is NOT opening, then symptoms would be higher combustion temps and as a result, higher Nox emissions. But the latter symptoms aren't going to be noticeable to a driver.

Causes: Usually this code points to either carbon buildup or a bad EGR valve. However that doesn't rule out the following:
Open or short in the 5 Volt reference circuit
Open or short in the ground circuit
Open or short in the PCM controlled voltage circuit
Bad PCM (less likely)

Possible Solutions: Using a scan tool command the EGR valve to open while watching the actual EGR position (it will probably be labeled "desired EGR" or something similar). The actual EGR position should be very close to the "desired" EGR position. If it is, then the problem is likely intermittent. It may have been a lodged piece of carbon that has since dislodged, or it could be a bad EGR valve winding that intermittently opens or shorts as the valve temperature changes.
If the EGR "desired" position is not close to the "actual" position, then unplug the EGR sensor. Check for a good 5 Volt reference voltage to the connector. If it doesn't show a reference voltage, repair an open or short in the 5 Volt reference circuit.
If there is a 5 volt reference voltage, activate the EGR with the scanner, monitor the EGR ground circuit with a DVOM (Digital Volt/Ohm meter). It should indicate a good ground. If it doesn't then repair the ground circuit.
If there is a good ground, then check the control circuit. It should indicate voltage that varies according to the percentage that the EGR is open. As it's open more, the voltage should increase accordingly. If it does, then replace the EGR valve.
If the voltage doesn't increase incrementally, then repair open or short in EGR control circuit.


Hope this helps (remember to rate and comment this answer).

Jul 11, 2011 | 2003 Chevrolet Impala

1 Answer

What does the check engine code p0406 mean on my dodge caravan with a 3.3L engine?


P0406 - Exhaust Gas Recirculation Sensor A Circuit High
An improper voltage signal is sent to ECM through the valve

Early Models : The EGR valve control the amount of exhaust gas routed to the intake manifold. Vacuum is applied to the EGR valve in response to the throttle opening. The vacuum control the movement of the taper valve connected to the vacuum diaphragm in the EGR valve.

zjlimited_279.gif

Late Models : The EGR volume control valve uses a step motor to control the flow rate of EGR from exhaust manifold. This motor has four winding phases. It operates according to the output pulse signal of the ECM. Two windings are turned ON and OFF in sequence. Each time an ON pulse is issued, the valve opens or closes, changing the flow rate. When no change in the flow rate is needed, the ECM does not issue the pulse signal. A certain voltage signal is issued so that the valve remains at that particular opening.

zjlimited_280.gif

Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
- Engine hesitation

Possible causes
- Harness or connectors (EGR volume control valve circuit is open or shorted.)
- EGR volume control solenoid valve
- EGR temperature sensor and circuit

Possible solution
- Repair EGR harness or connector
- Replaced EGR volume control solenoid valve
- Replaced EGR volume control valve


Hope helps (remember to rate and comment this answer).

Mar 31, 2011 | Dodge Caravan Cars & Trucks

2 Answers

Engin light #po406 2005 ram quad cab


P0406 - Exhaust Gas Recirculation Sensor A Circuit High

Early Models : The EGR valve control the amount of exhaust gas routed to the intake manifold. Vacuum is applied to the EGR valve in response to the throttle opening. The vacuum control the movement of the taper valve connected to the vacuum diaphragm in the EGR valve.

zjlimited_230.gif

Late Models : The EGR volume control valve uses a step motor to control the flow rate of EGR from exhaust manifold. This motor has four winding phases. It operates according to the output pulse signal of the ECM. Two windings are turned ON and OFF in sequence. Each time an ON pulse is issued, the valve opens or closes, changing the flow rate. When no change in the flow rate is needed, the ECM does not issue the pulse signal. A certain voltage signal is issued so that the valve remains at that particular opening.

zjlimited_231.gif

Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
- Engine hesitation

Possible causes
- Harness or connectors (EGR volume control valve circuit is open or shorted.)
- EGR volume control solenoid valve
- EGR temperature sensor and circuit

Possible solution
- Repair EGR harness or connector
- Replaced EGR volume control solenoid valve
- Replaced EGR volume control valve
When is the code detected?
- An improper voltage signal is sent to ECM through the valve


Hope helps.

Mar 06, 2011 | 2005 Dodge Ram

1 Answer

What does code p0404 mean on a 2005 chrystler pacifica?


P0404 - Exhaust Gas Recirculation Circuit Range/Performance OBD-II Trouble Code Technical Description

Exhaust Gas Recirculation Circuit Range/Performance
What does that mean?

The EGR (Exhaust Gas Recirculation) system's purpose is to redirect exhaust gas back into the cylinders. Since exhaust gas is inert, it displaces oxygen and fuel, thereby lowering cylinder temps, which, in turn, lowers oxides of nitrogen emissions. For that reason it needs to be carefully metered into the cylinders (via the EGR valve) so as not to adversely affect the engine's performance. (Too much EGR and the engine won't idle).
FB.init("dd7d9e9681341cde77587bc6a2029f6f"); OBD-Codes.com on Facebook

If you have a P0404, then the EGR valve is likely an electrically controlled EGR valve instead of a vacuum controlled EGR valve. Also, the valve will usually have a feedback system built into it that informs the PCM (Powertrain Control Module) what position the valve is in; open, closed, or somewhere in between. The PCM needs to know this to determine whether or not the valve is operating as needed. If the PCM determines that the valve should be operating, but the feedback circuit shows that the valve is not open, this code will set. Or if the PCM determines the valve should be closed but the feedback signal indicates that the valve is open, this code will set.
Symptoms

There may be no symptoms of a P0404 DTC other than the MIL (malfunction indicator lamp) or check engine light. However, Exhaust Gas Recirculation systems are inherently problematic due to carbon buildup in the intake manifold, etc. This normal buildup can lodge in an EGR valve, holding it open when it should be closed. If this is the case, the engine may idle rough, or not at all. If the valve has failed and is NOT opening, then symptoms would be higher combustion temps and as a result, higher Nox emissions. But the latter symptoms aren't going to be noticeable to a driver.
Causes

Usually this code points to either carbon buildup or a bad EGR valve. However that doesn't rule out the following:

  • Open or short in the 5 Volt reference circuit
  • Open or short in the ground circuit
  • Open or short in the PCM controlled voltage circuit
  • Bad PCM (less likely)
Possible Solutions
  1. Using a scan tool command the EGR valve to open while watching the actual EGR position (it will probably be labeled "desired EGR" or something similar). The actual EGR position should be very close to the "desired" EGR position. If it is, then the problem is likely intermittent. It may have been a lodged piece of carbon that has since dislodged, or it could be a bad EGR valve winding that intermittently opens or shorts as the valve temperature changes.
  2. If the EGR "desired" position is not close to the "actual" position, then unplug the EGR sensor. Check for a good 5 Volt reference voltage to the connector. If it doesn't show a reference voltage, repair an open or short in the 5 Volt reference circuit.
  3. If there is a 5 volt reference voltage, activate the EGR with the scanner, monitor the EGR ground circuit with a DVOM (Digital Volt/Ohm meter). It should indicate a good ground. If it doesn't then repair the ground circuit.
  4. If there is a good ground, then check the control circuit. It should indicate voltage that varies according to the percentage that the EGR is open. As it's open more, the voltage should increase accordingly. If it does, then replace the EGR valve.
  5. If the voltage doesn't increase incrementally, then repair open or short in EGR control circuit.

Nov 22, 2010 | Chrysler Pacifica Cars & Trucks

1 Answer

Loss of power, hesitation, ODBC II error code P0404, SES light come on sometimes


P0404 - Exhaust Gas Recirculation Circuit Range/Performance OBD-II Trouble Code Technical Description

Exhaust Gas Recirculation Circuit Range/Performance
What does that mean?The EGR (Exhaust Gas Recirculation) system's purpose is to redirect exhaust gas back into the cylinders. Since exhaust gas is inert, it displaces oxygen and fuel, thereby lowering cylinder temps, which, in turn, lowers oxides of nitrogen emissions. For that reason it needs to be carefully metered into the cylinders (via the EGR valve) so as not to adversely affect the engine's performance. (Too much EGR and the engine won't idle).
If you have a P0404, then the EGR valve is likely an electrically controlled EGR valve instead of a vacuum controlled EGR valve. Also, the valve will usually have a feedback system built into it that informs the PCM (Powertrain Control Module) what position the valve is in; open, closed, or somewhere in between. The PCM needs to know this to determine whether or not the valve is operating as needed. If the PCM determines that the valve should be operating, but the feedback circuit shows that the valve is not open, this code will set. Or if the PCM determines the valve should be closed but the feedback signal indicates that the valve is open, this code will set.
SymptomsThere may be no symptoms of a P0404 DTC other than the MIL (malfunction indicator lamp) or check engine light. However, Exhaust Gas Recirculation systems are inherently problematic due to carbon buildup in the intake manifold, etc. This normal buildup can lodge in an EGR valve, holding it open when it should be closed. If this is the case, the engine may idle rough, or not at all. If the valve has failed and is NOT opening, then symptoms would be higher combustion temps and as a result, higher Nox emissions. But the latter symptoms aren't going to be noticeable to a driver.
CausesUsually this code points to either carbon buildup or a bad EGR valve. However that doesn't rule out the following:

  • Open or short in the 5 Volt reference circuit
  • Open or short in the ground circuit
  • Open or short in the PCM controlled voltage circuit
  • Bad PCM (less likely)
Possible Solutions
  1. Using a scan tool command the EGR valve to open while watching the actual EGR position (it will probably be labeled "desired EGR" or something similar). The actual EGR position should be very close to the "desired" EGR position. If it is, then the problem is likely intermittent. It may have been a lodged piece of carbon that has since dislodged, or it could be a bad EGR valve winding that intermittently opens or shorts as the valve temperature changes.
  2. If the EGR "desired" position is not close to the "actual" position, then unplug the EGR sensor. Check for a good 5 Volt reference voltage to the connector. If it doesn't show a reference voltage, repair an open or short in the 5 Volt reference circuit.
  3. If there is a 5 volt reference voltage, activate the EGR with the scanner, monitor the EGR ground circuit with a DVOM (Digital Volt/Ohm meter). It should indicate a good ground. If it doesn't then repair the ground circuit.
  4. If there is a good ground, then check the control circuit. It should indicate voltage that varies according to the percentage that the EGR is open. As it's open more, the voltage should increase accordingly. If it does, then replace the EGR valve.
  5. If the voltage doesn't increase incrementally, then repair open or short in EGR control circuit.

Oct 22, 2010 | 2001 Oldsmobile Alero

1 Answer

What does code p042e mean


P-042e-Exhaust Gas Recirculation Control Stuck Open
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
P042E-EXHAUST GAS RECIRCULATION CONTROL STUCK OPEN

During regeneration of the aftertreatment Diesel Particulate Filter the Exhaust Gas Recirculation (EGR) valve is commanded to be in the closed position. If the EGR valve is not closed then a temperature rise will occur at the EGR valve orifice. The Engine Control Module (ECM) monitors the orifice temperature of the EGR valve and will set the fault if the temperature is above a calibrated threshold.

Unless the wiring has been tampered with going to the egr valve, replacement of the egr valve is the most likely scenario that will repair this for you.

Jul 13, 2010 | 2007 Dodge Ram Truck

Not finding what you are looking for?
1996 Nissan Maxima Logo

Related Topics:

304 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76051 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...