Question about 1994 Hyundai Excel

1 Answer

My hyuandi 1997 excel well not start i have to clutch start it. i all lost all of my gears. my engine is still trying to turn over.

Posted by on

  • 1 more comment 
  • Paul McGrath
    Paul McGrath May 11, 2010

    I wish I understood what you are saying

  • Paul McGrath
    Paul McGrath May 11, 2010

    Don't understand your problem. Clarify

  • mike loshbough
    mike loshbough May 11, 2010

    it sounds like the computer

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 776 Answers

Does the Check Engine light come ON when this happens? Whenever the "Check Engine" light comes on, there is always a DTC (Diagnostic Trouble Code) stored in the ECM (Engine Control Module). You'll need an OBDII (On-Board-Diagnostics) scanner to retrieve any codes recorded/set in ECM. Once you do this and let us know what, if any codes are set, then we can go from there.

Posted on Jun 28, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2005 Hyundai wont go in gear when i hit the clutch


if manual
collapsed pressure plate
worn clutch
hydraulic master or slave cylinder leaking
syncro internal transmission issue

if auto
low oil
torque converter collapse
gearbox solenoids or electronic fault
internal mechanical damage

e22313be-37e1-42f3-8c81-a7fa6a96fcfc.jpg

Jan 20, 2017 | Hyundai Cars & Trucks

1 Answer

1997 Isuzu hombre NO movement when into gear, left IT in first gear let UP off the clutch and the truck didn't jump or CUT off. . What's wrong with it?


MT trans. got it. (said clutch let up.. is the clue)
engine is running right? (sorry)
and you shift to all gears, and car does not move, RIGHT?

if the clutch slips and car will not move in ALL gears.
the clutch is bad, or if a cable clutch, never setting free play on cable is the cause,... done 100s.
or if hydraulic actuated clutch pedal (im too lazy to look)
then if it fails the car can only moved if you start engine in gear.
see?
please post all steps.
i get in car,
i start engine in neutral. (did you) or start in gear with clutch to floor.?
i then select all gears, and release clutch and car will not move.
like that.... and win. (i can diagnose any clutch, ive wrecked many racing, so.... see all horrors) and fixed them by self. all.

if you can only move car , starting engine in gear.?
that is bad clutch cable or actuator (slave or master cylinder)

is the clutch locked all times, or slips all the time.
see? only that need be said.
and 10 other symptoms. (chatters, noises, grabs, etc)

Apr 17, 2015 | 1997 Isuzu Hombre

1 Answer

86 acura legend manual transmission shifting problems


so the problem is that you cannot get it into gear from a stop
(grinds trying to force into gear) . if you have a clutch pedal, what I mean is that clutch pedal has pressure behind it,moves up and down by itself, then its a clutch assy needs replaced.clutch disc/pressure plate/release bearing. if there is no pedal,falls to floor, its either clutch slave or clutch master failure issue(lost all fluid). but nothing points at needing a transmission,it should be fine

Apr 04, 2013 | 1986 Acura Legend

2 Answers

Whats happened when clutch has jus gone all lose an theres no tightness there anymore hyuandi 98 excel


You start with the master & slave cylinder,
any cables,etc & hopefully the transaxle doesn't
have to come out

Mar 09, 2013 | Hyundai Excel Cars & Trucks

2 Answers

Manuel transmission wont go into gear.


First, is your clutch working? Check this by turning the engine off then put the car in first gear. Firmly apply the parking brake and fully depress the clutch pedal and hold it depressed as you crank the engine. If the engine starts and the car and revs normally then check the oil level in the trans. If the car tries to jump forward then adjust the clutch.

Jan 08, 2012 | 1997 Mazda Protege

2 Answers

Squealing noise stops when i push in clutch pedal we were on the interstate and suddenly i had no clutch pedal we got off the street it was hard to get it out of gear i checked the fluid it was fine...


Sounds like a bad Throw Out Bearing.. Needless to say.. it has to be repaired.

Depending on mileage.. may as well replace the clutch/pressure plate.. and have he flywheel looked at.. change the tranny oil.. check the u joints.. rear end etc..

Best of luck!

Apr 09, 2011 | 1997 Chevrolet Camaro

1 Answer

1997 ford probe manual transmission problem. I was driving in 4th gear when all of a sudden the car felt like gears where griding. It didn't have the really lound noise as if you didn't put it fully in...


well we could just lie and tell you what you want to hear but that wont help you... did you smell anything when this happend, if you lost a spring in the clutch plate this is what could happen.. but im speculating at the moment with out seperating the engine and trani..
that is where i would start, dont put the trani in the grave befor you see if it has a heartbeat, check things out a little more before panicing.
try putting the clutch in and putting in gear as you strat the car see if it will go in gear, my gut says you may have a clutch problem but you need to test a bit more before i can say for sure...
good luck please post comments if you have more info for me to chew on.

Aug 20, 2009 | 1997 Ford Probe

3 Answers

Nissan sentra 1997 starts but wont go when put in gear


is it a manual or automatic?if it's manual check clutch.if it is automatic check transmission fluid.

Dec 02, 2008 | 1997 Nissan Sentra

Not finding what you are looking for?
1994 Hyundai Excel Logo

Related Topics:

117 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...